[PATCH V6 00/12] arm64: dts: imx8m-evk: misc dts update

Peng Fan (OSS) peng.fan at oss.nxp.com
Thu Nov 17 01:53:51 PST 2022


From: Peng Fan <peng.fan at nxp.com>

V6:
 Add R-b
 Drop nxp,dvs-run-voltage in patch 7

V5:
 Drop patch v4 11, 12 which could added together with wlan support.

V4:
 Use mmc-pwrseq in patch 12
 
V3:
 Drop patch V2 3/15 
 Add A-b R-b
 Sort order in patch 9
 Update commit log in patch 10
 Drop #address-cells, #size-cells in patch 11
 Use off-on-delay-us in patch 12
 Update patch 13 according to patch 12 change

V2:
 https://lore.kernel.org/all/20221024031351.4135651-1-peng.fan@oss.nxp.com/
 Address Marco's comments
   Update commit log for patch [3,5,9,14]/15
   Order iomuxc in patch 4/15
   Update flexspi node name in patch 6/15
   Increase i2c speed in patch 7/15

V1:
 https://lore.kernel.org/all/20221020095934.1659449-1-peng.fan@oss.nxp.com/

This patchset includes several dts update for i.MX8M/N/P-EVK, with
only one dtsi patch to add mlmix power domain for i.MX8MP.

 i.MX8MP-EVK: Enable PWM, uart1/3, I2C2
              correct pcie pad
	      Fix pmic buck/ldo voltage
	      off-on-delay-us for SD
 i.MX8MN-EVK: Enable UART1, SDHC1, I2C recovery IOMUXC
	      Update vdd_soc dvs voltage
 i.MX8MM-EVK: add vcc supply for pca6416
              use off-on-delay-us for SD

A few patches are directly cherry-picked from NXP downstream which
already includes R-b tag

Adrian Alonso (1):
  arm64: dts: imx8mm-evk: add vcc supply for pca6416

Clark Wang (1):
  ARM64: dts: imx8mp-evk: add pwm support

Haibo Chen (1):
  arm64: dts: imx8m[m,q]-evk: change to use off-on-delay-us in regulator

Han Xu (1):
  arm64: dts: imx8mp-evk: enable fspi nor on imx8mp evk

Peng Fan (8):
  arm64: dts: imx8mp: add mlmix power domain
  arm64: dts: imx8mp-evk: correct pcie pad settings
  arm64: dts: imx8mp-evk: enable uart1/3 ports
  arm64: dts: imx8mp-evk: enable I2C2 node
  arm64: dts: imx8mn-evk: update vdd_soc dvs voltage
  arm64: dts: imx8mn-evk: set off-on-delay-us in regulator
  arm64: dts: imx8mn-evk: add i2c gpio recovery settings
  arm64: dts: imx8mn-evk: enable uart1

 arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi |   2 +
 arch/arm64/boot/dts/freescale/imx8mn-evk.dts  |   3 +-
 arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi |  43 ++++++-
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts  | 117 +++++++++++++++++-
 arch/arm64/boot/dts/freescale/imx8mp.dtsi     |   8 ++
 arch/arm64/boot/dts/freescale/imx8mq-evk.dts  |   1 +
 6 files changed, 167 insertions(+), 7 deletions(-)

-- 
2.37.1




More information about the linux-arm-kernel mailing list