[PATCH] ARM: dts: stm32: Rename mdio0 to mdio on DHCOR Testbench board

[Alexandre TORGUE]

Hi Marek

On 10/27/22 20:38, Marek Vasut wrote:
> Replace "mdio0" node with "mdio" to match mdio.yaml DT schema.
> 
> Fixes: c8ce0dd75515b ("ARM: dts: stm32: Add DHCOR based Testbench board")
> Signed-off-by: Marek Vasut <marex at denx.de>
> ---
> Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
> Cc: linux-stm32 at st-md-mailman.stormreply.com
> To: linux-arm-kernel at lists.infradead.org
> ---
>   arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
> index c7dcee4ee3d1d..5fdb74b652aca 100644
> --- a/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
> +++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-testbench.dtsi
> @@ -62,7 +62,7 @@ &ethernet0 {
>   	max-speed = <1000>;
>   	phy-handle = <&phy0>;
>   
> -	mdio0 {
> +	mdio {
>   		#address-cells = <1>;
>   		#size-cells = <0>;
>   		compatible = "snps,dwmac-mdio";


Applied on stm32-next.

Thanks.
Alex