[PATCH v4 0/3] phy: sun4i-usb: add support for the USB PHY on F1C100s SoC

[Andre Przywara]

This is a spin-off of v3 of the suniv F1C100s USB support series[1], just
carrying the USB PHY bits. The H616 USB PHY support is already in
linux-phy.git/next, so this is rebased on top of that, to avoid
conflicts.
The actual binding and driver change in the first two patches is
straightforward. Since it came up in reviews, I reworked the quirk
handling in the phy-sun4i-usb.c driver, to become more maintainable and
readable, in patch 3/3. For a changelog, see below.

Cheers,
Andre

[1] https://lore.kernel.org/linux-arm-kernel/20221106154826.6687-1-andre.przywara@arm.com/

Changelog v3 ... v4:
- split off from rest of suniv F1C100s USB series
- rebase on top of H616 USB PHY patches
- drop phy2_is_hsic in favour of reusing existing hsic_index member
- add tags

Changelog v2 ... v3:
- remove redundant "Device Tree Bindings" suffix in DT binding doc title
- add BSD license to binding doc file (as per checkpatch)
- use existing PHY sun4i_a10_phy type instead of inventing new one
- add patch to clean up sunxi USB PHY driver

Changelog v1 ... v2:
- USB PHY binding: clarify the relation with other phy-sun4i-usb bindings



Andre Przywara (1):
  phy: sun4i-usb: Replace types with explicit quirk flags

Icenowy Zheng (2):
  dt-bindings: phy: add binding document for Allwinner F1C100s USB PHY
  phy: sun4i-usb: add support for the USB PHY on F1C100s SoC

 .../phy/allwinner,suniv-f1c100s-usb-phy.yaml  | 83 +++++++++++++++++++
 drivers/phy/allwinner/phy-sun4i-usb.c         | 59 ++++++-------
 2 files changed, 107 insertions(+), 35 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/phy/allwinner,suniv-f1c100s-usb-phy.yaml

-- 
2.25.1