[PATCH v2] arm64: dts: ti: k3-j721e-main: Remove ti,strobe-sel property

[Bhavya Kapoor]

According to latest errata of J721e [1], HS400 mode is not supported
in MMCSD0 subsystem (i2024) .  Speed modes supported has been already
updated in commit eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
but it missed dropping 'ti,strobe-sel' property which is
only required by HS400 speed mode.

Thus, drop 'ti,strobe-sel' property from kernel dtsi for J721e SoC.

[1] https://www.ti.com/lit/er/sprz455/sprz455.pdf

Fixes: eb8f6194e807 ("arm64: dts: ti: k3-j721e-main: Update the speed modes supported and their itap delay values for MMCSD subsystems")
Signed-off-by: Bhavya Kapoor <b-kapoor at ti.com>
---

Changelog v1 -> v2 :
	- Updated Commit Message based on what Nishanth Menon has told
		in https://lore.kernel.org/all/20221115034324.6qpxl2774bzwbl3t@acorn/

 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 917c9dc99efa..e4748a838d83 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1094,7 +1094,6 @@
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
 		ti,trm-icp = <0x8>;
-		ti,strobe-sel = <0x77>;
 		dma-coherent;
 	};
 
-- 
2.20.1