[PATCH v2 1/9] dt-bindings: arm-smmu: Allow up to 3 power-domains
Konrad Dybcio
konrad.dybcio at linaro.org
Tue Nov 15 04:54:03 PST 2022
On 14/11/2022 17:58, Krzysztof Kozlowski wrote:
> On 14/11/2022 16:53, Konrad Dybcio wrote:
>>
>> On 14/11/2022 14:00, Krzysztof Kozlowski wrote:
>>> On 14/11/2022 12:17, Konrad Dybcio wrote:
>>>> On 14/11/2022 12:01, Krzysztof Kozlowski wrote:
>>>>> On 14/11/2022 11:42, Konrad Dybcio wrote:
>>>>>> Some SMMUs require that a vote is held on as much as 3 separate PDs
>>>>>> (hello Qualcomm). Allow it in bindings.
>>>>>>
>>>>>> Signed-off-by: Konrad Dybcio <konrad.dybcio at linaro.org>
>>>>>> ---
>>>>>> Changes since v1:
>>>>>> - Add minItems
>>>>>>
>>>>>> Documentation/devicetree/bindings/iommu/arm,smmu.yaml | 3 ++-
>>>>>> 1 file changed, 2 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>>>>>> index 9066e6df1ba1..82bc696de662 100644
>>>>>> --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>>>>>> +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
>>>>>> @@ -159,7 +159,8 @@ properties:
>>>>>> through the TCU's programming interface.
>>>>>>
>>>>>> power-domains:
>>>>>> - maxItems: 1
>>>>>> + minItems: 0
>>>>> It cannot be 0.
>>>>>
>>>>> minItems: 1
>>>>>
>>>>> Anyway you still need to restrict it per variant, as I said in previous
>>>>> version.
>>>> Hm.. I'm not entirely sure what you mean.. Should I add a list of
>>>> compatibles
>>> Yes and limit it to maxItems: 1 for "else".
>>
>> I tried adding:
>>
>>
>>
>> - if:
>> properties:
>> compatible:
>> contains:
>> enum:
>> - qcom,sm6375-smmu-500
>> then:
>> properties:
>> power-domains:
>> minItems: 3
>> maxItems: 3
>> else:
>> properties:
>> power-domains:
>> maxItems: 1
>>
>>
>> Right under the nvidia reg if-else in the allOf, but dtbs_check throws
>> errors like:
>>
>>
>> /home/konrad/linux/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino-poplar.dtb:
>> iommu at 5040000: 'power-domains' does not match any of the regexes:
>> 'pinctrl-[0-9]+'
>>
>>
>> Any clues as to why?
>
> I don't know what code do you have there, but generic pattern is:
>
> https://elixir.bootlin.com/linux/v5.19-rc6/source/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml#L38
>
I tried many things, but I still don't seem to get a hang of it.. Here's
my current diff rebased on top of Dmitry's recent cleanups (available at
[1])
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 28f5720824cd..55759aebc4a0 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -200,7 +200,7 @@ properties:
maxItems: 7
power-domains:
- maxItems: 1
+ maxItems: 3
nvidia,memory-controller:
description: |
@@ -364,6 +364,26 @@ allOf:
- description: interface clock required to access smmu's
registers
through the TCU's programming interface.
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,sm6375-smmu-500
+ then:
+ properties:
+ power-domains:
+ items:
+ - description: SNoC MMU TBU RT GDSC
+ - description: SNoC MMU TBU NRT GDSC
+ - description: SNoC TURING MMU TBU0 GDSC
+
+ required:
+ - power-domains
+ else:
+ properties:
+ power-domains:
+ maxItems: 1
+
examples:
- |+
/* SMMU with stream matching or stream indexing */
In my eyes, this should work, but I still get errors like:
/home/konrad/linux/arch/arm64/boot/dts/qcom/sm8250-hdk.dtb:
iommu at 3da0000: power-domains: [[108, 0]] is too short
as if the else: path was never taken..
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/log/?h=for-joerg/arm-smmu/bindings
Konrad
> Best regards,
> Krzysztof
>
More information about the linux-arm-kernel
mailing list