[PATCH v3 5/5] arm64: dts: rockchip: Add Anbernic RG351M

[Maya Matuszczyk]

pon., 14 lis 2022 o 15:23 Chris Morgan <macroalpha82 at gmail.com> napisał(a):
>
> On Sat, Nov 12, 2022 at 03:34:11PM +0100, Maya Matuszczyk wrote:
> > This device is a clone of Odroid Go Advance, with added PWM motor, internal
> > gamepad connected on USB instead of just having it be on GPIO + ADC, and
> > missing battery shunt resistor.
>
> I have concerns about using the rk817 battery driver with no shunt
> resistor. For the moment, that would result in wrong values being
> given for battery capacity and current. What could be done is to
> update the driver to only check voltage values when the shunt
> resistor is missing (since it's the current values and columb counter
> that gets affected with no resistor in place). For now though, I'd
> just remove the battery and charger since it's going to report the
> wrong data to users.
I guess that's fair... the device literally has no shunt resistor and DT
should reflect hardware.

>
> >
> > There's also an LED on GPIO 77(I *guess* PB5 on &gpio2), that is controlled in a weird way:
> >
> > - It is set to red by setting output value to 1
> > - Set to green by setting output value to 0
> > - Set to yellow by setting gpio direction to input
> >
> > I have no idea how to describe that in DTS, without adding a custom
> > driver, for now it's just left out.
>
> Check out this document, it says you'd group them together under a
> multicolor led node:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
As far as I know there is no support to controlling LED in a way that this
device requires the LED to be controlled.
It's just one GPIO, and setting it to outputting 0, outputting 1 or to input
changes the color and there's no way to turn it off.

Best Regards,
Maya Matuszczyk
>
> >
> > Signed-off-by: Maya Matuszczyk <maccraft123mc at gmail.com>
> > ---
> >  arch/arm64/boot/dts/rockchip/Makefile         |  1 +
> >  .../dts/rockchip/rk3326-anbernic-rg351m.dts   | 54 +++++++++++++++++++
> >  2 files changed, 55 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> > index 142c83d2e5aa..b379516c15eb 100644
> > --- a/arch/arm64/boot/dts/rockchip/Makefile
> > +++ b/arch/arm64/boot/dts/rockchip/Makefile
> > @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
> > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-anbernic-rg351m.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
> >  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
> > new file mode 100644
> > index 000000000000..7f4726d4130e
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/rockchip/rk3326-anbernic-rg351m.dts
> > @@ -0,0 +1,54 @@
> > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> > +/*
> > + * Copyright (c) 2019 Hardkernel Co., Ltd
> > + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
> > + * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc at gmail.com>
> > + */
> > +
> > +/dts-v1/;
> > +#include "rk3326-odroid-go.dtsi"
> > +
> > +/ {
> > +     model = "Anbernic RG351M";
> > +     compatible = "anbernic,rg351m", "rockchip,rk3326";
> > +
> > +     battery: battery {
> > +             compatible = "simple-battery";
> > +             charge-full-design-microamp-hours = <3450000>;
> > +             charge-term-current-microamp = <300000>;
> > +             constant-charge-current-max-microamp = <2000000>;
> > +             constant-charge-voltage-max-microvolt = <4200000>;
> > +             factory-internal-resistance-micro-ohms = <100000>;
> > +             voltage-max-design-microvolt = <4100000>;
> > +             voltage-min-design-microvolt = <3500000>;
> > +
> > +             ocv-capacity-celsius = <20>;
> > +             ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
> > +                                     <3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
> > +                                     <3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
> > +                                     <3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
> > +                                     <3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
> > +                                     <3574170 0>;
> > +     };
> > +
> > +     vibrator {
> > +             compatible = "pwm-vibrator";
> > +             pwms = <&pwm0 0 1000000 0>;
> > +             pwm-names = "enable";
> > +     };
> > +};
> > +
> > +/delete-node/ &builtin_gamepad;
> > +/delete-node/ &vcc_host; /* conflicts with pwm vibration motor */
> > +
> > +&internal_display {
> > +     compatible = "elida,kd35t133";
> > +};
> > +
> > +&pwm0 {
> > +     status = "okay";
> > +};
> > +
> > +&rk817_charger {
> > +     monitored-battery = <&battery>;
> > +};
> > --
> > 2.38.1
> >