[PATCH 5/5] clk: imx8mn: fix imx8mn_enet_phy_sels clocks list

[Dario Binacchi]

According to the "Clock Root" table of the reference manual (document
IMX8MNRM Rev 2, 07/2022):

     Clock Root         offset     Source Select (CCM_TARGET_ROOTn[MUX])
        ...              ...                    ...
 ENET_PHY_REF_CLK_ROOT  0xAA80            000 - 24M_REF_CLK
                                          001 - SYSTEM_PLL2_DIV20
                                          010 - SYSTEM_PLL2_DIV8
                                          011 - SYSTEM_PLL2_DIV5
                                          100 - SYSTEM_PLL2_DIV2
                                          101 - AUDIO_PLL1_CLK
                                          110 - VIDEO_PLL_CLK
                                          111 - AUDIO_PLL2_CLK
        ...              ...                    ...

while the imx8mn_enet_phy_sels list didn't contained audio_pll1_out for
source select bits 101b.

Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>

---

 drivers/clk/imx/clk-imx8mn.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/clk/imx/clk-imx8mn.c b/drivers/clk/imx/clk-imx8mn.c
index 37128c35198d..2afea905f7f3 100644
--- a/drivers/clk/imx/clk-imx8mn.c
+++ b/drivers/clk/imx/clk-imx8mn.c
@@ -140,8 +140,8 @@ static const char * const imx8mn_enet_timer_sels[] = {"osc_24m", "sys_pll2_100m"
 						      "clk_ext4", "video_pll_out", };
 
 static const char * const imx8mn_enet_phy_sels[] = {"osc_24m", "sys_pll2_50m", "sys_pll2_125m",
-						    "sys_pll2_200m", "sys_pll2_500m", "video_pll_out",
-						    "audio_pll2_out", };
+						    "sys_pll2_200m", "sys_pll2_500m", "audio_pll1_out",
+						    "video_pll_out", "audio_pll2_out", };
 
 static const char * const imx8mn_nand_sels[] = {"osc_24m", "sys_pll2_500m", "audio_pll1_out",
 						"sys_pll1_400m", "audio_pll2_out", "sys_pll3_out",
-- 
2.32.0