[PATCH v6 01/20] dt-bindings: imx6q-pcie: Fix clock names for imx6sx and imx8mq

[Serge Semin]

On Thu, Nov 10, 2022 at 03:01:04PM -0600, Rob Herring wrote:
> On Mon, Nov 07, 2022 at 11:49:15PM +0300, Serge Semin wrote:
> > Originally as it was defined the legacy bindings the pcie_inbound_axi and
> > pcie_aux clock names were supposed to be used in the fsl,imx6sx-pcie and
> > fsl,imx8mq-pcie devices respectively. But the bindings conversion has been
> > incorrectly so now the fourth clock name is defined as "pcie_inbound_axi
> > for imx6sx-pcie, pcie_aux for imx8mq-pcie", which is completely wrong.
> > Let's fix that by conditionally apply the clock-names constraints based on
> > the compatible string content.
> > 
> > Fixes: 751ca492f131 ("dt-bindings: PCI: imx6: convert the imx pcie controller to dtschema")
> > Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
> > Acked-by: Alexander Stein <alexander.stein at ew.tq-group.com>
> > 
> > ---
> > 
> > Changelog v5:
> > - This is a new patch added on the v5 release of the patchset.
> > ---
> >  .../bindings/pci/fsl,imx6q-pcie.yaml          | 47 +++++++++++++++++--
> >  1 file changed, 42 insertions(+), 5 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > index 376e739bcad4..ebfe75f1576e 100644
> > --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> > @@ -16,6 +16,47 @@ description: |+
> >  
> >  allOf:
> >    - $ref: /schemas/pci/snps,dw-pcie.yaml#
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: fsl,imx6sx-pcie
> > +    then:
> > +      properties:
> > +        clock-names:
> > +          items:
> > +            - const: pcie
> > +            - const: pcie_bus
> > +            - const: pcie_phy
> > +            - const: pcie_inbound_axi
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          contains:
> > +            const: fsl,imx8mq-pcie
> > +    then:
> > +      properties:
> > +        clock-names:
> > +          items:
> > +            - const: pcie
> > +            - const: pcie_bus
> > +            - const: pcie_phy
> > +            - const: pcie_aux
> > +  - if:
> > +      properties:
> > +        compatible:
> > +          not:
> > +            contains:
> > +              enum:
> > +                - fsl,imx6sx-pcie
> > +                - fsl,imx8mq-pcie
> > +    then:
> > +      properties:
> > +        clock-names:
> > +          items:
> > +            - const: pcie
> > +            - const: pcie_bus
> > +            - const: pcie_phy
> >  
> >  properties:
> >    compatible:
> > @@ -57,11 +98,7 @@ properties:
> >  
> >    clock-names:
> >      minItems: 3
> > -    items:
> > -      - const: pcie
> > -      - const: pcie_bus
> > -      - const: pcie_phy
> > -      - const: pcie_inbound_axi for imx6sx-pcie, pcie_aux for imx8mq-pcie
> 

> This should have been just 'enum: [ pcie_inbound_axi, pcie_aux ]'
> 
> And then do:
> 
>   - if:
>       properties:
>         compatible:
>           contains:
>             const: fsl,imx8mq-pcie
>     then:
>       properties:
>         clock-names:
>           items:
>             - {}
>             - {}
>             - {}
>             - const: pcie_aux
> 
> 
> And then another if/then with 'maxItems: 3'

Ok. Will fix it in v7. But IMO it looks a bit less descriptive
especially with the '{}' pattern and a need to look in two different
places to comprehend the whole constraint. I understand though what is an
intention of such construction. It's to place as much info into the
schema body and isolate the platform-specific constraints in the allOf
clause. Pretty neat anyway.

-Sergey