[RFC v3 01/11] arm64: dts: mt7986: harmonize device node order

[Matthias Brugger]

On 06/11/2022 09:50, Frank Wunderlich wrote:
> From: Sam Shih <sam.shih at mediatek.com>
> 
> This arrange device tree nodes in alphabetical order.
> 
> Signed-off-by: Sam Shih <sam.shih at mediatek.com>
> Signed-off-by: Frank Wunderlich <frank-w at public-files.de>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>

Applied, thanks!

> ---
> i modified sams patch
> 
> https://patchwork.kernel.org/project/linux-mediatek/patch/20220427124741.18245-2-sam.shih@mediatek.com/
> 
> by moving pio-node up instead of moving uarts down to ensure alphabetical
> order for switch-/wifi-node.
> 
> And moved uart0 and wifi in mt7986b-rfb too.
> ---
>   arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 94 ++++++++++----------
>   arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 22 ++---
>   2 files changed, 58 insertions(+), 58 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index afe37b702eef..6189436fe31d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -54,6 +54,53 @@ switch: switch at 0 {
>   	};
>   };
>   
> +&pio {
> +	uart1_pins: uart1-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart1";
> +		};
> +	};
> +
> +	uart2_pins: uart2-pins {
> +		mux {
> +			function = "uart";
> +			groups = "uart2";
> +		};
> +	};
> +
> +	wf_2g_5g_pins: wf-2g-5g-pins {
> +		mux {
> +			function = "wifi";
> +			groups = "wf_2g", "wf_5g";
> +		};
> +		conf {
> +			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> +			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> +			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> +			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> +			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> +			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> +			       "WF1_TOP_CLK", "WF1_TOP_DATA";
> +			drive-strength = <4>;
> +		};
> +	};
> +
> +	wf_dbdc_pins: wf-dbdc-pins {
> +		mux {
> +			function = "wifi";
> +			groups = "wf_dbdc";
> +		};
> +		conf {
> +			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> +			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> +			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> +			       "WF0_TOP_CLK", "WF0_TOP_DATA";
> +			drive-strength = <4>;
> +		};
> +	};
> +};
> +
>   &switch {
>   	ports {
>   		#address-cells = <1>;
> @@ -121,50 +168,3 @@ &wifi {
>   	pinctrl-0 = <&wf_2g_5g_pins>;
>   	pinctrl-1 = <&wf_dbdc_pins>;
>   };
> -
> -&pio {
> -	uart1_pins: uart1-pins {
> -		mux {
> -			function = "uart";
> -			groups = "uart1";
> -		};
> -	};
> -
> -	uart2_pins: uart2-pins {
> -		mux {
> -			function = "uart";
> -			groups = "uart2";
> -		};
> -	};
> -
> -	wf_2g_5g_pins: wf-2g-5g-pins {
> -		mux {
> -			function = "wifi";
> -			groups = "wf_2g", "wf_5g";
> -		};
> -		conf {
> -			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> -			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> -			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> -			       "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
> -			       "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
> -			       "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
> -			       "WF1_TOP_CLK", "WF1_TOP_DATA";
> -			drive-strength = <4>;
> -		};
> -	};
> -
> -	wf_dbdc_pins: wf-dbdc-pins {
> -		mux {
> -			function = "wifi";
> -			groups = "wf_dbdc";
> -		};
> -		conf {
> -			pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
> -			       "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
> -			       "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
> -			       "WF0_TOP_CLK", "WF0_TOP_DATA";
> -			drive-strength = <4>;
> -		};
> -	};
> -};
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index 3443013b5971..7459ddb6b6f0 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -25,10 +25,6 @@ memory at 40000000 {
>   	};
>   };
>   
> -&uart0 {
> -	status = "okay";
> -};
> -
>   &eth {
>   	status = "okay";
>   
> @@ -99,13 +95,6 @@ fixed-link {
>   	};
>   };
>   
> -&wifi {
> -	status = "okay";
> -	pinctrl-names = "default", "dbdc";
> -	pinctrl-0 = <&wf_2g_5g_pins>;
> -	pinctrl-1 = <&wf_dbdc_pins>;
> -};
> -
>   &pio {
>   	wf_2g_5g_pins: wf-2g-5g-pins {
>   		mux {
> @@ -138,3 +127,14 @@ conf {
>   		};
>   	};
>   };
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&wifi {
> +	status = "okay";
> +	pinctrl-names = "default", "dbdc";
> +	pinctrl-0 = <&wf_2g_5g_pins>;
> +	pinctrl-1 = <&wf_dbdc_pins>;
> +};