[PATCH V3 1/2] ARM: dts: bcm283x: Fix underscores in node names
Stefan Wahren
stefan.wahren at i2se.com
Thu Nov 10 09:31:04 PST 2022
A lot pinctrl node names, regulators and local_intc do not follow the
node name convention to avoid underscore. So fix this by using hyphen
or a proper node name.
Signed-off-by: Stefan Wahren <stefan.wahren at i2se.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 4 +-
arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi | 4 +-
arch/arm/boot/dts/bcm2711.dtsi | 94 +++++++++++++-------------
arch/arm/boot/dts/bcm2835-common.dtsi | 18 ++---
arch/arm/boot/dts/bcm2836.dtsi | 2 +-
arch/arm/boot/dts/bcm283x.dtsi | 70 +++++++++----------
6 files changed, 96 insertions(+), 96 deletions(-)
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 4432412044de..aaad9b7ec630 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -27,7 +27,7 @@ led-pwr {
};
};
- sd_io_1v8_reg: sd_io_1v8_reg {
+ sd_io_1v8_reg: regulator-sd-io-1v8 {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
regulator-min-microvolt = <1800000>;
@@ -41,7 +41,7 @@ sd_io_1v8_reg: sd_io_1v8_reg {
status = "okay";
};
- sd_vcc_reg: sd_vcc_reg {
+ sd_vcc_reg: regulator-sd-vcc {
compatible = "regulator-fixed";
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
index a2954d466a73..48e63ab7848c 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dtsi
@@ -12,7 +12,7 @@ chosen {
stdout-path = "serial1:115200n8";
};
- sd_io_1v8_reg: sd_io_1v8_reg {
+ sd_io_1v8_reg: regulator-sd-io-1v8 {
compatible = "regulator-gpio";
regulator-name = "vdd-sd-io";
regulator-min-microvolt = <1800000>;
@@ -26,7 +26,7 @@ sd_io_1v8_reg: sd_io_1v8_reg {
status = "okay";
};
- sd_vcc_reg: sd_vcc_reg {
+ sd_vcc_reg: regulator-sd-vcc {
compatible = "regulator-fixed";
regulator-name = "vcc-sd";
regulator-min-microvolt = <3300000>;
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 941c4d16791b..0f65a813bd44 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -48,7 +48,7 @@ soc {
* This node is the provider for the enable-method for
* bringing up secondary cores.
*/
- local_intc: local_intc at 40000000 {
+ local_intc: interrupt-controller at 40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
};
@@ -647,21 +647,21 @@ &gpio {
gpio-ranges = <&gpio 0 0 58>;
- gpclk0_gpio49: gpclk0_gpio49 {
+ gpclk0_gpio49: gpclk0-gpio49 {
pin-gpclk {
pins = "gpio49";
function = "alt1";
bias-disable;
};
};
- gpclk1_gpio50: gpclk1_gpio50 {
+ gpclk1_gpio50: gpclk1-gpio50 {
pin-gpclk {
pins = "gpio50";
function = "alt1";
bias-disable;
};
};
- gpclk2_gpio51: gpclk2_gpio51 {
+ gpclk2_gpio51: gpclk2-gpio51 {
pin-gpclk {
pins = "gpio51";
function = "alt1";
@@ -669,7 +669,7 @@ pin-gpclk {
};
};
- i2c0_gpio46: i2c0_gpio46 {
+ i2c0_gpio46: i2c0-gpio46 {
pin-sda {
function = "alt0";
pins = "gpio46";
@@ -681,7 +681,7 @@ pin-scl {
bias-disable;
};
};
- i2c1_gpio46: i2c1_gpio46 {
+ i2c1_gpio46: i2c1-gpio46 {
pin-sda {
function = "alt1";
pins = "gpio46";
@@ -693,7 +693,7 @@ pin-scl {
bias-disable;
};
};
- i2c3_gpio2: i2c3_gpio2 {
+ i2c3_gpio2: i2c3-gpio2 {
pin-sda {
function = "alt5";
pins = "gpio2";
@@ -705,7 +705,7 @@ pin-scl {
bias-disable;
};
};
- i2c3_gpio4: i2c3_gpio4 {
+ i2c3_gpio4: i2c3-gpio4 {
pin-sda {
function = "alt5";
pins = "gpio4";
@@ -717,7 +717,7 @@ pin-scl {
bias-disable;
};
};
- i2c4_gpio6: i2c4_gpio6 {
+ i2c4_gpio6: i2c4-gpio6 {
pin-sda {
function = "alt5";
pins = "gpio6";
@@ -729,7 +729,7 @@ pin-scl {
bias-disable;
};
};
- i2c4_gpio8: i2c4_gpio8 {
+ i2c4_gpio8: i2c4-gpio8 {
pin-sda {
function = "alt5";
pins = "gpio8";
@@ -741,7 +741,7 @@ pin-scl {
bias-disable;
};
};
- i2c5_gpio10: i2c5_gpio10 {
+ i2c5_gpio10: i2c5-gpio10 {
pin-sda {
function = "alt5";
pins = "gpio10";
@@ -753,7 +753,7 @@ pin-scl {
bias-disable;
};
};
- i2c5_gpio12: i2c5_gpio12 {
+ i2c5_gpio12: i2c5-gpio12 {
pin-sda {
function = "alt5";
pins = "gpio12";
@@ -765,7 +765,7 @@ pin-scl {
bias-disable;
};
};
- i2c6_gpio0: i2c6_gpio0 {
+ i2c6_gpio0: i2c6-gpio0 {
pin-sda {
function = "alt5";
pins = "gpio0";
@@ -777,7 +777,7 @@ pin-scl {
bias-disable;
};
};
- i2c6_gpio22: i2c6_gpio22 {
+ i2c6_gpio22: i2c6-gpio22 {
pin-sda {
function = "alt5";
pins = "gpio22";
@@ -789,7 +789,7 @@ pin-scl {
bias-disable;
};
};
- i2c_slave_gpio8: i2c_slave_gpio8 {
+ i2c_slave_gpio8: i2c-slave-gpio8 {
pins-i2c-slave {
pins = "gpio8",
"gpio9",
@@ -799,7 +799,7 @@ pins-i2c-slave {
};
};
- jtag_gpio48: jtag_gpio48 {
+ jtag_gpio48: jtag-gpio48 {
pins-jtag {
pins = "gpio48",
"gpio49",
@@ -811,7 +811,7 @@ pins-jtag {
};
};
- mii_gpio28: mii_gpio28 {
+ mii_gpio28: mii-gpio28 {
pins-mii {
pins = "gpio28",
"gpio29",
@@ -820,7 +820,7 @@ pins-mii {
function = "alt4";
};
};
- mii_gpio36: mii_gpio36 {
+ mii_gpio36: mii-gpio36 {
pins-mii {
pins = "gpio36",
"gpio37",
@@ -830,7 +830,7 @@ pins-mii {
};
};
- pcm_gpio50: pcm_gpio50 {
+ pcm_gpio50: pcm-gpio50 {
pins-pcm {
pins = "gpio50",
"gpio51",
@@ -840,63 +840,63 @@ pins-pcm {
};
};
- pwm0_0_gpio12: pwm0_0_gpio12 {
+ pwm0_0_gpio12: pwm0-0-gpio12 {
pin-pwm {
pins = "gpio12";
function = "alt0";
bias-disable;
};
};
- pwm0_0_gpio18: pwm0_0_gpio18 {
+ pwm0_0_gpio18: pwm0-0-gpio18 {
pin-pwm {
pins = "gpio18";
function = "alt5";
bias-disable;
};
};
- pwm1_0_gpio40: pwm1_0_gpio40 {
+ pwm1_0_gpio40: pwm1-0-gpio40 {
pin-pwm {
pins = "gpio40";
function = "alt0";
bias-disable;
};
};
- pwm0_1_gpio13: pwm0_1_gpio13 {
+ pwm0_1_gpio13: pwm0-1-gpio13 {
pin-pwm {
pins = "gpio13";
function = "alt0";
bias-disable;
};
};
- pwm0_1_gpio19: pwm0_1_gpio19 {
+ pwm0_1_gpio19: pwm0-1-gpio19 {
pin-pwm {
pins = "gpio19";
function = "alt5";
bias-disable;
};
};
- pwm1_1_gpio41: pwm1_1_gpio41 {
+ pwm1_1_gpio41: pwm1-1-gpio41 {
pin-pwm {
pins = "gpio41";
function = "alt0";
bias-disable;
};
};
- pwm0_1_gpio45: pwm0_1_gpio45 {
+ pwm0_1_gpio45: pwm0-1-gpio45 {
pin-pwm {
pins = "gpio45";
function = "alt0";
bias-disable;
};
};
- pwm0_0_gpio52: pwm0_0_gpio52 {
+ pwm0_0_gpio52: pwm0-0-gpio52 {
pin-pwm {
pins = "gpio52";
function = "alt1";
bias-disable;
};
};
- pwm0_1_gpio53: pwm0_1_gpio53 {
+ pwm0_1_gpio53: pwm0-1-gpio53 {
pin-pwm {
pins = "gpio53";
function = "alt1";
@@ -904,7 +904,7 @@ pin-pwm {
};
};
- rgmii_gpio35: rgmii_gpio35 {
+ rgmii_gpio35: rgmii-gpio35 {
pin-start-stop {
pins = "gpio35";
function = "alt4";
@@ -914,26 +914,26 @@ pin-rx-ok {
function = "alt4";
};
};
- rgmii_irq_gpio34: rgmii_irq_gpio34 {
+ rgmii_irq_gpio34: rgmii-irq-gpio34 {
pin-irq {
pins = "gpio34";
function = "alt5";
};
};
- rgmii_irq_gpio39: rgmii_irq_gpio39 {
+ rgmii_irq_gpio39: rgmii-irq-gpio39 {
pin-irq {
pins = "gpio39";
function = "alt4";
};
};
- rgmii_mdio_gpio28: rgmii_mdio_gpio28 {
+ rgmii_mdio_gpio28: rgmii-mdio-gpio28 {
pins-mdio {
pins = "gpio28",
"gpio29";
function = "alt5";
};
};
- rgmii_mdio_gpio37: rgmii_mdio_gpio37 {
+ rgmii_mdio_gpio37: rgmii-mdio-gpio37 {
pins-mdio {
pins = "gpio37",
"gpio38";
@@ -941,7 +941,7 @@ pins-mdio {
};
};
- spi0_gpio46: spi0_gpio46 {
+ spi0_gpio46: spi0-gpio46 {
pins-spi {
pins = "gpio46",
"gpio47",
@@ -950,7 +950,7 @@ pins-spi {
function = "alt2";
};
};
- spi2_gpio46: spi2_gpio46 {
+ spi2_gpio46: spi2-gpio46 {
pins-spi {
pins = "gpio46",
"gpio47",
@@ -960,7 +960,7 @@ pins-spi {
function = "alt5";
};
};
- spi3_gpio0: spi3_gpio0 {
+ spi3_gpio0: spi3-gpio0 {
pins-spi {
pins = "gpio0",
"gpio1",
@@ -969,7 +969,7 @@ pins-spi {
function = "alt3";
};
};
- spi4_gpio4: spi4_gpio4 {
+ spi4_gpio4: spi4-gpio4 {
pins-spi {
pins = "gpio4",
"gpio5",
@@ -978,7 +978,7 @@ pins-spi {
function = "alt3";
};
};
- spi5_gpio12: spi5_gpio12 {
+ spi5_gpio12: spi5-gpio12 {
pins-spi {
pins = "gpio12",
"gpio13",
@@ -987,7 +987,7 @@ pins-spi {
function = "alt3";
};
};
- spi6_gpio18: spi6_gpio18 {
+ spi6_gpio18: spi6-gpio18 {
pins-spi {
pins = "gpio18",
"gpio19",
@@ -997,7 +997,7 @@ pins-spi {
};
};
- uart2_gpio0: uart2_gpio0 {
+ uart2_gpio0: uart2-gpio0 {
pin-tx {
pins = "gpio0";
function = "alt4";
@@ -1009,7 +1009,7 @@ pin-rx {
bias-pull-up;
};
};
- uart2_ctsrts_gpio2: uart2_ctsrts_gpio2 {
+ uart2_ctsrts_gpio2: uart2-ctsrts-gpio2 {
pin-cts {
pins = "gpio2";
function = "alt4";
@@ -1021,7 +1021,7 @@ pin-rts {
bias-disable;
};
};
- uart3_gpio4: uart3_gpio4 {
+ uart3_gpio4: uart3-gpio4 {
pin-tx {
pins = "gpio4";
function = "alt4";
@@ -1033,7 +1033,7 @@ pin-rx {
bias-pull-up;
};
};
- uart3_ctsrts_gpio6: uart3_ctsrts_gpio6 {
+ uart3_ctsrts_gpio6: uart3-ctsrts-gpio6 {
pin-cts {
pins = "gpio6";
function = "alt4";
@@ -1045,7 +1045,7 @@ pin-rts {
bias-disable;
};
};
- uart4_gpio8: uart4_gpio8 {
+ uart4_gpio8: uart4-gpio8 {
pin-tx {
pins = "gpio8";
function = "alt4";
@@ -1057,7 +1057,7 @@ pin-rx {
bias-pull-up;
};
};
- uart4_ctsrts_gpio10: uart4_ctsrts_gpio10 {
+ uart4_ctsrts_gpio10: uart4-ctsrts-gpio10 {
pin-cts {
pins = "gpio10";
function = "alt4";
@@ -1069,7 +1069,7 @@ pin-rts {
bias-disable;
};
};
- uart5_gpio12: uart5_gpio12 {
+ uart5_gpio12: uart5-gpio12 {
pin-tx {
pins = "gpio12";
function = "alt4";
@@ -1081,7 +1081,7 @@ pin-rx {
bias-pull-up;
};
};
- uart5_ctsrts_gpio14: uart5_ctsrts_gpio14 {
+ uart5_ctsrts_gpio14: uart5-ctsrts-gpio14 {
pin-cts {
pins = "gpio14";
function = "alt4";
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index a037d2bc5b11..bb7e8f7facaf 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -152,41 +152,41 @@ &cpu_thermal {
};
&gpio {
- i2c_slave_gpio18: i2c_slave_gpio18 {
+ i2c_slave_gpio18: i2c-slave-gpio18 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- jtag_gpio4: jtag_gpio4 {
+ jtag_gpio4: jtag-gpio4 {
brcm,pins = <4 5 6 12 13>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- pwm0_gpio12: pwm0_gpio12 {
+ pwm0_gpio12: pwm0-gpio12 {
brcm,pins = <12>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- pwm0_gpio18: pwm0_gpio18 {
+ pwm0_gpio18: pwm0-gpio18 {
brcm,pins = <18>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- pwm0_gpio40: pwm0_gpio40 {
+ pwm0_gpio40: pwm0-gpio40 {
brcm,pins = <40>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- pwm1_gpio13: pwm1_gpio13 {
+ pwm1_gpio13: pwm1-gpio13 {
brcm,pins = <13>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- pwm1_gpio19: pwm1_gpio19 {
+ pwm1_gpio19: pwm1-gpio19 {
brcm,pins = <19>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- pwm1_gpio41: pwm1_gpio41 {
+ pwm1_gpio41: pwm1-gpio41 {
brcm,pins = <41>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- pwm1_gpio45: pwm1_gpio45 {
+ pwm1_gpio45: pwm1-gpio45 {
brcm,pins = <45>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index db56a3443a4a..50aee663ddfc 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -10,7 +10,7 @@ soc {
<0x40000000 0x40000000 0x00001000>;
dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
- local_intc: local_intc at 40000000 {
+ local_intc: interrupt-controller at 40000000 {
compatible = "brcm,bcm2836-l1-intc";
reg = <0x40000000 0x100>;
interrupt-controller;
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index d2d9c6e67f39..c9c52a19ef3b 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -135,17 +135,17 @@ gpio: gpio at 7e200000 {
* groups only make sense to switch to a
* particular function together.
*/
- dpi_gpio0: dpi_gpio0 {
+ dpi_gpio0: dpi-gpio0 {
brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11
12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
- emmc_gpio22: emmc_gpio22 {
+ emmc_gpio22: emmc-gpio22 {
brcm,pins = <22 23 24 25 26 27>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- emmc_gpio34: emmc_gpio34 {
+ emmc_gpio34: emmc-gpio34 {
brcm,pins = <34 35 36 37 38 39>;
brcm,function = <BCM2835_FSEL_ALT3>;
brcm,pull = <BCM2835_PUD_OFF
@@ -155,95 +155,95 @@ BCM2835_PUD_UP
BCM2835_PUD_UP
BCM2835_PUD_UP>;
};
- emmc_gpio48: emmc_gpio48 {
+ emmc_gpio48: emmc-gpio48 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- gpclk0_gpio4: gpclk0_gpio4 {
+ gpclk0_gpio4: gpclk0-gpio4 {
brcm,pins = <4>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- gpclk1_gpio5: gpclk1_gpio5 {
+ gpclk1_gpio5: gpclk1-gpio5 {
brcm,pins = <5>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- gpclk1_gpio42: gpclk1_gpio42 {
+ gpclk1_gpio42: gpclk1-gpio42 {
brcm,pins = <42>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- gpclk1_gpio44: gpclk1_gpio44 {
+ gpclk1_gpio44: gpclk1-gpio44 {
brcm,pins = <44>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- gpclk2_gpio6: gpclk2_gpio6 {
+ gpclk2_gpio6: gpclk2-gpio6 {
brcm,pins = <6>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- gpclk2_gpio43: gpclk2_gpio43 {
+ gpclk2_gpio43: gpclk2-gpio43 {
brcm,pins = <43>;
brcm,function = <BCM2835_FSEL_ALT0>;
brcm,pull = <BCM2835_PUD_OFF>;
};
- i2c0_gpio0: i2c0_gpio0 {
+ i2c0_gpio0: i2c0-gpio0 {
brcm,pins = <0 1>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- i2c0_gpio28: i2c0_gpio28 {
+ i2c0_gpio28: i2c0-gpio28 {
brcm,pins = <28 29>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- i2c0_gpio44: i2c0_gpio44 {
+ i2c0_gpio44: i2c0-gpio44 {
brcm,pins = <44 45>;
brcm,function = <BCM2835_FSEL_ALT1>;
};
- i2c1_gpio2: i2c1_gpio2 {
+ i2c1_gpio2: i2c1-gpio2 {
brcm,pins = <2 3>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- i2c1_gpio44: i2c1_gpio44 {
+ i2c1_gpio44: i2c1-gpio44 {
brcm,pins = <44 45>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
- jtag_gpio22: jtag_gpio22 {
+ jtag_gpio22: jtag-gpio22 {
brcm,pins = <22 23 24 25 26 27>;
brcm,function = <BCM2835_FSEL_ALT4>;
};
- pcm_gpio18: pcm_gpio18 {
+ pcm_gpio18: pcm-gpio18 {
brcm,pins = <18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- pcm_gpio28: pcm_gpio28 {
+ pcm_gpio28: pcm-gpio28 {
brcm,pins = <28 29 30 31>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
- sdhost_gpio48: sdhost_gpio48 {
+ sdhost_gpio48: sdhost-gpio48 {
brcm,pins = <48 49 50 51 52 53>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- spi0_gpio7: spi0_gpio7 {
+ spi0_gpio7: spi0-gpio7 {
brcm,pins = <7 8 9 10 11>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- spi0_gpio35: spi0_gpio35 {
+ spi0_gpio35: spi0-gpio35 {
brcm,pins = <35 36 37 38 39>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
- spi1_gpio16: spi1_gpio16 {
+ spi1_gpio16: spi1-gpio16 {
brcm,pins = <16 17 18 19 20 21>;
brcm,function = <BCM2835_FSEL_ALT4>;
};
- spi2_gpio40: spi2_gpio40 {
+ spi2_gpio40: spi2-gpio40 {
brcm,pins = <40 41 42 43 44 45>;
brcm,function = <BCM2835_FSEL_ALT4>;
};
- uart0_gpio14: uart0_gpio14 {
+ uart0_gpio14: uart0-gpio14 {
brcm,pins = <14 15>;
brcm,function = <BCM2835_FSEL_ALT0>;
};
@@ -252,50 +252,50 @@ uart0_gpio14: uart0_gpio14 {
* people often run uart0 on the two pins
* without flow control.
*/
- uart0_ctsrts_gpio16: uart0_ctsrts_gpio16 {
+ uart0_ctsrts_gpio16: uart0-ctsrts-gpio16 {
brcm,pins = <16 17>;
brcm,function = <BCM2835_FSEL_ALT3>;
};
- uart0_ctsrts_gpio30: uart0_ctsrts_gpio30 {
+ uart0_ctsrts_gpio30: uart0-ctsrts-gpio30 {
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT3>;
brcm,pull = <BCM2835_PUD_UP BCM2835_PUD_OFF>;
};
- uart0_gpio32: uart0_gpio32 {
+ uart0_gpio32: uart0-gpio32 {
brcm,pins = <32 33>;
brcm,function = <BCM2835_FSEL_ALT3>;
brcm,pull = <BCM2835_PUD_OFF BCM2835_PUD_UP>;
};
- uart0_gpio36: uart0_gpio36 {
+ uart0_gpio36: uart0-gpio36 {
brcm,pins = <36 37>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
- uart0_ctsrts_gpio38: uart0_ctsrts_gpio38 {
+ uart0_ctsrts_gpio38: uart0-ctsrts-gpio38 {
brcm,pins = <38 39>;
brcm,function = <BCM2835_FSEL_ALT2>;
};
- uart1_gpio14: uart1_gpio14 {
+ uart1_gpio14: uart1-gpio14 {
brcm,pins = <14 15>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_ctsrts_gpio16: uart1_ctsrts_gpio16 {
+ uart1_ctsrts_gpio16: uart1-ctsrts-gpio16 {
brcm,pins = <16 17>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_gpio32: uart1_gpio32 {
+ uart1_gpio32: uart1-gpio32 {
brcm,pins = <32 33>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_ctsrts_gpio30: uart1_ctsrts_gpio30 {
+ uart1_ctsrts_gpio30: uart1-ctsrts-gpio30 {
brcm,pins = <30 31>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_gpio40: uart1_gpio40 {
+ uart1_gpio40: uart1-gpio40 {
brcm,pins = <40 41>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
- uart1_ctsrts_gpio42: uart1_ctsrts_gpio42 {
+ uart1_ctsrts_gpio42: uart1-ctsrts-gpio42 {
brcm,pins = <42 43>;
brcm,function = <BCM2835_FSEL_ALT5>;
};
--
2.34.1
More information about the linux-arm-kernel
mailing list