[PATCH v5 1/4] PCI: j721e: Add per platform maximum lane settings

Lorenzo Pieralisi lpieralisi at kernel.org
Thu Nov 10 07:46:21 PST 2022


On Wed, Nov 09, 2022 at 12:25:53AM -0800, Matt Ranostay wrote:
> Various platforms have different maximum amount of lanes that
> can be selected. Add max_lanes to struct j721e_pcie to allow
> for error checking on num-lanes selection from device tree.

https://lore.kernel.org/linux-pci/CAL_JsqJ5cOLXhD-73esmhVwMEWGT+w3SJC14Z0jY4tQJQRA7iw@mail.gmail.com

Why have you reposted this patch ?

Lorenzo

> Signed-off-by: Matt Ranostay <mranostay at ti.com>
> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
> ---
>  drivers/pci/controller/cadence/pci-j721e.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
> index a82f845cc4b5..875224d34958 100644
> --- a/drivers/pci/controller/cadence/pci-j721e.c
> +++ b/drivers/pci/controller/cadence/pci-j721e.c
> @@ -48,8 +48,6 @@ enum link_status {
>  
>  #define GENERATION_SEL_MASK		GENMASK(1, 0)
>  
> -#define MAX_LANES			2
> -
>  struct j721e_pcie {
>  	struct cdns_pcie	*cdns_pcie;
>  	struct clk		*refclk;
> @@ -72,6 +70,7 @@ struct j721e_pcie_data {
>  	unsigned int		quirk_disable_flr:1;
>  	u32			linkdown_irq_regfield;
>  	unsigned int		byte_access_allowed:1;
> +	unsigned int		max_lanes;
>  };
>  
>  static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
> @@ -291,11 +290,13 @@ static const struct j721e_pcie_data j721e_pcie_rc_data = {
>  	.quirk_retrain_flag = true,
>  	.byte_access_allowed = false,
>  	.linkdown_irq_regfield = LINK_DOWN,
> +	.max_lanes = 2,
>  };
>  
>  static const struct j721e_pcie_data j721e_pcie_ep_data = {
>  	.mode = PCI_MODE_EP,
>  	.linkdown_irq_regfield = LINK_DOWN,
> +	.max_lanes = 2,
>  };
>  
>  static const struct j721e_pcie_data j7200_pcie_rc_data = {
> @@ -303,23 +304,27 @@ static const struct j721e_pcie_data j7200_pcie_rc_data = {
>  	.quirk_detect_quiet_flag = true,
>  	.linkdown_irq_regfield = J7200_LINK_DOWN,
>  	.byte_access_allowed = true,
> +	.max_lanes = 2,
>  };
>  
>  static const struct j721e_pcie_data j7200_pcie_ep_data = {
>  	.mode = PCI_MODE_EP,
>  	.quirk_detect_quiet_flag = true,
>  	.quirk_disable_flr = true,
> +	.max_lanes = 2,
>  };
>  
>  static const struct j721e_pcie_data am64_pcie_rc_data = {
>  	.mode = PCI_MODE_RC,
>  	.linkdown_irq_regfield = J7200_LINK_DOWN,
>  	.byte_access_allowed = true,
> +	.max_lanes = 1,
>  };
>  
>  static const struct j721e_pcie_data am64_pcie_ep_data = {
>  	.mode = PCI_MODE_EP,
>  	.linkdown_irq_regfield = J7200_LINK_DOWN,
> +	.max_lanes = 1,
>  };
>  
>  static const struct of_device_id of_j721e_pcie_match[] = {
> @@ -433,7 +438,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
>  	pcie->user_cfg_base = base;
>  
>  	ret = of_property_read_u32(node, "num-lanes", &num_lanes);
> -	if (ret || num_lanes > MAX_LANES)
> +	if (ret || num_lanes > data->max_lanes)
>  		num_lanes = 1;
>  	pcie->num_lanes = num_lanes;
>  
> -- 
> 2.38.GIT
> 



More information about the linux-arm-kernel mailing list