[PATCH net-next v2 09/12] net: ethernet: mtk_eth_soc: fix VLAN rx hardware acceleration
Vladimir Oltean
olteanv at gmail.com
Thu Nov 10 07:22:59 PST 2022
On Wed, Nov 09, 2022 at 05:34:23PM +0100, Felix Fietkau wrote:
> - enable VLAN untagging for PDMA rx
> - make it possible to disable the feature via ethtool
> - pass VLAN tag to the DSA driver
> - untag special tag on PDMA only if no non-DSA devices are in use
> - disable special tag untagging on 7986 for now, since it's not working yet
Each of these bullet points should be its own patch, really.
"Fix VLAN rx hardware acceleration" isn't doing much to describe them
and their motivation.
>
> Signed-off-by: Felix Fietkau <nbd at nbd.name>
> ---
> drivers/net/ethernet/mediatek/mtk_eth_soc.c | 99 ++++++++++++++++-----
> drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 ++
> 2 files changed, 84 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> index 92bdd69eed2e..ffaa9fe32b14 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
> @@ -23,6 +23,7 @@
> #include <linux/jhash.h>
> #include <linux/bitfield.h>
> #include <net/dsa.h>
> +#include <net/dst_metadata.h>
>
> #include "mtk_eth_soc.h"
> #include "mtk_wed.h"
> @@ -2008,23 +2009,27 @@ static int mtk_poll_rx(struct napi_struct *napi, int budget,
> if (reason == MTK_PPE_CPU_REASON_HIT_UNBIND_RATE_REACHED)
> mtk_ppe_check_skb(eth->ppe[0], skb, hash);
>
> - if (netdev->features & NETIF_F_HW_VLAN_CTAG_RX) {
> - if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
> - if (trxd.rxd3 & RX_DMA_VTAG_V2)
> - __vlan_hwaccel_put_tag(skb,
> - htons(RX_DMA_VPID(trxd.rxd4)),
> - RX_DMA_VID(trxd.rxd4));
> - } else if (trxd.rxd2 & RX_DMA_VTAG) {
> - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
> - RX_DMA_VID(trxd.rxd3));
> - }
> + if (MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
> + if (trxd.rxd3 & RX_DMA_VTAG_V2)
> + __vlan_hwaccel_put_tag(skb,
> + htons(RX_DMA_VPID(trxd.rxd4)),
> + RX_DMA_VID(trxd.rxd4));
> + } else if (trxd.rxd2 & RX_DMA_VTAG) {
> + __vlan_hwaccel_put_tag(skb, htons(RX_DMA_VPID(trxd.rxd3)),
> + RX_DMA_VID(trxd.rxd3));
> + }
> +
> + /* When using VLAN untagging in combination with DSA, the
> + * hardware treats the MTK special tag as a VLAN and untags it.
> + */
> + if (skb_vlan_tag_present(skb) && netdev_uses_dsa(netdev)) {
> + unsigned int port = ntohs(skb->vlan_proto) & GENMASK(2, 0);
> +
> + if (port < ARRAY_SIZE(eth->dsa_meta) &&
> + eth->dsa_meta[port])
> + skb_dst_set_noref(skb, ð->dsa_meta[port]->dst);
Why _noref?
>
> - /* If the device is attached to a dsa switch, the special
> - * tag inserted in VLAN field by hw switch can * be offloaded
> - * by RX HW VLAN offload. Clear vlan info.
> - */
> - if (netdev_uses_dsa(netdev))
> - __vlan_hwaccel_clear_tag(skb);
> + __vlan_hwaccel_clear_tag(skb);
> }
>
> skb_record_rx_queue(skb, 0);
> @@ -2847,15 +2852,19 @@ static netdev_features_t mtk_fix_features(struct net_device *dev,
>
> static int mtk_set_features(struct net_device *dev, netdev_features_t features)
> {
> - int err = 0;
> -
> - if (!((dev->features ^ features) & NETIF_F_LRO))
> - return 0;
> + struct mtk_mac *mac = netdev_priv(dev);
> + struct mtk_eth *eth = mac->hw;
> + netdev_features_t diff = dev->features ^ features;
>
> - if (!(features & NETIF_F_LRO))
> + if ((diff & NETIF_F_LRO) && !(features & NETIF_F_LRO))
> mtk_hwlro_netdev_disable(dev);
>
> - return err;
> + /* Set RX VLAN offloading */
> + if (diff & NETIF_F_HW_VLAN_CTAG_RX)
> + mtk_w32(eth, !!(features & NETIF_F_HW_VLAN_CTAG_RX),
> + MTK_CDMP_EG_CTRL);
> +
> + return 0;
> }
>
> /* wait for DMA to finish whatever it is doing before we start using it again */
> @@ -3137,11 +3146,45 @@ static int mtk_device_event(struct notifier_block *n, unsigned long event, void
> return NOTIFY_DONE;
> }
>
> +static bool mtk_uses_dsa(struct net_device *dev)
> +{
> +#if IS_ENABLED(CONFIG_NET_DSA)
> + return netdev_uses_dsa(dev) &&
> + dev->dsa_ptr->tag_ops->proto == DSA_TAG_PROTO_MTK;
> +#else
> + return false;
> +#endif
> +}
I see that the pattern of dumpster diving through DSA guts has already
made it into the mtk_eth_soc driver. A "nice" side effect is that now
you need to build the mtk_eth_soc driver as module when DSA is a module.
It would be possible to pass information about ports and their tagging
protocol in use via a new struct netdev_dsa_upper_info (similar to how
netdev_lag_upper_info is used). Since this is propagated via a netdev
notifier chain, no direct access to private DSA structures is performed,
and the mtk driver can cache from these notifiers only what DSA chooses
to expose.
What would this driver need to get rid of the dependency on symbols
exported by DSA (dsa_port_from_netdev)?
DSA can inform the master driver of the tagging protocol in use.
In turn, the master can write back some fields in the dsa_upper_info
structure, like bool rx_tag_offload, bool tx_tag_offload.
We could then make some optimizations, like add a static_branch key in
dsa_switch_rcv() if we know that the system uses DSA tag offloading, and
keep the code that processes skb_metadata_dst() turned off otherwise.
Such a mechanism would probably be needed in the TX direction anyway,
otherwise DSA has no way of knowing whether to create a metadata_dst or
not.
> +
> static int mtk_open(struct net_device *dev)
> {
> struct mtk_mac *mac = netdev_priv(dev);
> struct mtk_eth *eth = mac->hw;
> - int err;
> + int i, err;
> +
> + if (mtk_uses_dsa(dev)) {
> + for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
> + struct metadata_dst *md_dst = eth->dsa_meta[i];
> +
> + if (md_dst)
> + continue;
> +
> + md_dst = metadata_dst_alloc(0, METADATA_HW_PORT_MUX,
> + GFP_KERNEL);
> + if (!md_dst)
> + return -ENOMEM;
> +
> + md_dst->u.port_info.port_id = i;
> + eth->dsa_meta[i] = md_dst;
> + }
> + } else {
> + /* Hardware special tag parsing needs to be disabled if at least
> + * one MAC does not use DSA.
> + */
> + u32 val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
> + val &= ~MTK_CDMP_STAG_EN;
> + mtk_w32(eth, val, MTK_CDMP_IG_CTRL);
> + }
>
> err = phylink_of_phy_connect(mac->phylink, mac->of_node, 0);
> if (err) {
> @@ -3469,6 +3512,10 @@ static int mtk_hw_init(struct mtk_eth *eth)
> */
> val = mtk_r32(eth, MTK_CDMQ_IG_CTRL);
> mtk_w32(eth, val | MTK_CDMQ_STAG_EN, MTK_CDMQ_IG_CTRL);
> + if (!MTK_HAS_CAPS(eth->soc->caps, MTK_NETSYS_V2)) {
> + val = mtk_r32(eth, MTK_CDMP_IG_CTRL);
> + mtk_w32(eth, val | MTK_CDMP_STAG_EN, MTK_CDMP_IG_CTRL);
> + }
>
> /* Enable RX VLan Offloading */
> mtk_w32(eth, 1, MTK_CDMP_EG_CTRL);
> @@ -3686,6 +3733,12 @@ static int mtk_free_dev(struct mtk_eth *eth)
> free_netdev(eth->netdev[i]);
> }
>
> + for (i = 0; i < ARRAY_SIZE(eth->dsa_meta); i++) {
> + if (!eth->dsa_meta[i])
> + break;
> + metadata_dst_free(eth->dsa_meta[i]);
> + }
I don't like that metadata dst's are allocated in ndo_open() and freed
in platform_driver::remove(). It suggests memory leaks and worse.
I'm also not sure if you're using the API in the best way (metadata_dst_free()
seems to ignore all other references, have you considered dst_release())?
> +
> return 0;
> }
>
> diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> index 146437ca044b..1c85fbad5bc1 100644
> --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
> @@ -22,6 +22,9 @@
> #include <linux/bpf_trace.h>
> #include "mtk_ppe.h"
>
> +#define MTK_MAX_DSA_PORTS 7
> +#define MTK_DSA_PORT_MASK GENMASK(2, 0)
> +
> #define MTK_QDMA_NUM_QUEUES 16
> #define MTK_QDMA_PAGE_SIZE 2048
> #define MTK_MAX_RX_LENGTH 1536
> @@ -93,6 +96,9 @@
> #define MTK_CDMQ_IG_CTRL 0x1400
> #define MTK_CDMQ_STAG_EN BIT(0)
>
> +/* CDMQ Exgress Control Register */
> +#define MTK_CDMQ_EG_CTRL 0x1404
> +
> /* CDMP Ingress Control Register */
> #define MTK_CDMP_IG_CTRL 0x400
> #define MTK_CDMP_STAG_EN BIT(0)
> @@ -1149,6 +1155,8 @@ struct mtk_eth {
>
> int ip_align;
>
> + struct metadata_dst *dsa_meta[MTK_MAX_DSA_PORTS];
> +
> struct mtk_ppe *ppe[2];
> struct rhashtable flow_table;
>
> --
> 2.38.1
>
More information about the linux-arm-kernel
mailing list