[PATCH 0/2] ARM: dts: bcm283x: Minor clean up

Florian Fainelli f.fainelli at gmail.com
Wed Nov 9 14:57:35 PST 2022


On 11/9/22 14:39, Stefan Wahren wrote:
> Hi Florian,
> 
> Am 25.09.22 um 18:40 schrieb Stefan Wahren:
>> This series cleans up some minor issues, but this affects most of
>> the bcm283x DT sources.
> since you already applied Maximes patches, i want to know if you are 
> fine with this series?

Yes, those patches are fine, just they were not in patchwork because 
bcm-kernel-feedback-list at broadcom.com was not copied :/

Patch 1 still applies, but patch 2 failed with:

Apply? [y]es/[n]o/[e]dit/[v]iew patch/[a]ccept all: y
Applying: ARM: dts: bcm283x: Move ACT LED into separate dtsi
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-a-plus.dts:2
error: arch/arm/boot/dts/bcm2835-rpi-a-plus.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-a.dts:2
error: arch/arm/boot/dts/bcm2835-rpi-a.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-b-plus.dts:2
error: arch/arm/boot/dts/bcm2835-rpi-b-plus.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts:2
error: arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-b.dts:2
error: arch/arm/boot/dts/bcm2835-rpi-b.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi:2
error: arch/arm/boot/dts/bcm2835-rpi-cm1.dtsi: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-zero-w.dts:6
error: arch/arm/boot/dts/bcm2835-rpi-zero-w.dts: patch does not apply
error: patch failed: arch/arm/boot/dts/bcm2835-rpi-zero.dts:6
error: arch/arm/boot/dts/bcm2835-rpi-zero.dts: patch does not apply
Patch failed at 0001 ARM: dts: bcm283x: Move ACT LED into separate dtsi
hint: Use 'git am --show-current-patch=diff' to see the failed patch
When you have resolved this problem, run "git am -i --continue".
If you prefer to skip this patch, run "git am -i --skip" instead.
To restore the original branch and stop patching, run "git am -i --abort".
zsh: exit 128   git am -is

Do you mind resending based upon devicetree/next and copying 
bcm-kernel-feedback-list at broadcom.com so this lands in our patchwork?

Thanks!
-- 
Florian




More information about the linux-arm-kernel mailing list