[PATCH v2 4/6] arm64: dts: fsd: Add MCAN device node

[Krzysztof Kozlowski]

On 09/11/2022 11:09, Vivek Yadav wrote:
> Add MCAN device node and enable the same for FSD platform.
> This also adds the required pin configuration for the same.
> 
> Signed-off-by: Sriranjani P <sriranjani.p at samsung.com>
> Cc: devicetree at vger.kernel.org
> Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt at linaro.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Signed-off-by: Vivek Yadav <vivek.2311 at samsung.com>
> ---
>  arch/arm64/boot/dts/tesla/fsd-evb.dts      | 16 +++++
>  arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi | 28 +++++++++
>  arch/arm64/boot/dts/tesla/fsd.dtsi         | 68 ++++++++++++++++++++++
>  3 files changed, 112 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/tesla/fsd-evb.dts b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> index 1db6ddf03f01..af3862e9fe3b 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-evb.dts
> +++ b/arch/arm64/boot/dts/tesla/fsd-evb.dts
> @@ -34,6 +34,22 @@
>  	clock-frequency = <24000000>;
>  };
>  
> +&m_can0 {
> +	status = "okay";
> +};
> +
> +&m_can1 {
> +	status = "okay";
> +};
> +
> +&m_can2 {
> +	status = "okay";
> +};
> +
> +&m_can3 {
> +	status = "okay";
> +};
> +
>  &serial_0 {
>  	status = "okay";
>  };
> diff --git a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> index d0abb9aa0e9e..bb5289ebfef3 100644
> --- a/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd-pinctrl.dtsi
> @@ -339,6 +339,34 @@
>  		samsung,pin-pud = <FSD_PIN_PULL_UP>;
>  		samsung,pin-drv = <FSD_PIN_DRV_LV1>;
>  	};
> +
> +	m_can0_bus: m-can0-bus-pins {
> +		samsung,pins = "gpd0-0", "gpd0-1";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
> +
> +	m_can1_bus: m-can1-bus-pins {
> +		samsung,pins = "gpd0-2", "gpd0-3";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
> +
> +	m_can2_bus: m-can2-bus-pins {
> +		samsung,pins = "gpd0-4", "gpd0-5";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
> +
> +	m_can3_bus: m-can3-bus-pins {
> +		samsung,pins = "gpd0-6", "gpd0-7";
> +		samsung,pin-function = <FSD_PIN_FUNC_2>;
> +		samsung,pin-pud = <FSD_PIN_PULL_UP>;
> +		samsung,pin-drv = <FSD_PIN_DRV_LV4>;
> +	};
>  };
>  
>  &pinctrl_pmu {
> diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
> index 3d8ebbfc27f4..154fd3fc5895 100644
> --- a/arch/arm64/boot/dts/tesla/fsd.dtsi
> +++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
> @@ -765,6 +765,74 @@
>  			interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
>  		};
>  
> +		m_can0: can at 14088000 {
> +			compatible = "bosch,m_can";
> +			reg = <0x0 0x14088000 0x0 0x0200>,
> +				<0x0 0x14080000 0x0 0x8000>;

Align with < in line before.

> +			reg-names = "m_can", "message_ram";
> +			interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
> +					<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "int0", "int1";
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&m_can0_bus>;
> +			clocks = <&clock_peric PERIC_MCAN0_IPCLKPORT_PCLK>,
> +				<&clock_peric PERIC_MCAN0_IPCLKPORT_CCLK>;

The same (unless it's the problem of diff/patch and these are actually
aligned).


Best regards,
Krzysztof