[PATCH v7 07/10] drm: bridge: samsung-dsim: Add atomic_get_input_bus_fmts

[Jagan Teki]

Hi Marek,

On Fri, Nov 4, 2022 at 12:28 AM Marek Vasut <marex at denx.de> wrote:
>
> On 11/3/22 18:27, Jagan Teki wrote:
> > On Thu, Nov 3, 2022 at 9:56 PM Marek Vasut <marex at denx.de> wrote:
> >>
> >> On 11/3/22 10:39, Jagan Teki wrote:
> >>> On Sun, Oct 16, 2022 at 3:31 AM Marek Vasut <marex at denx.de> wrote:
> >>>>
> >>>> On 10/5/22 17:13, Jagan Teki wrote:
> >>>>
> >>>> [...]
> >>>>
> >>>>> @@ -1321,6 +1322,32 @@ static void samsung_dsim_atomic_post_disable(struct drm_bridge *bridge,
> >>>>>         pm_runtime_put_sync(dsi->dev);
> >>>>>     }
> >>>>>
> >>>>> +#define MAX_INPUT_SEL_FORMATS        1
> >>>>> +
> >>>>> +static u32 *
> >>>>> +samsung_dsim_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> >>>>> +                                    struct drm_bridge_state *bridge_state,
> >>>>> +                                    struct drm_crtc_state *crtc_state,
> >>>>> +                                    struct drm_connector_state *conn_state,
> >>>>> +                                    u32 output_fmt,
> >>>>> +                                    unsigned int *num_input_fmts)
> >>>>> +{
> >>>>> +     u32 *input_fmts;
> >>>>> +
> >>>>> +     *num_input_fmts = 0;
> >>>>> +
> >>>>> +     input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts),
> >>>>> +                          GFP_KERNEL);
> >>>>> +     if (!input_fmts)
> >>>>> +             return NULL;
> >>>>> +
> >>>>> +     /* This is the DSI-end bus format */
> >>>>> +     input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> >>>>> +     *num_input_fmts = 1;
> >>>>
> >>>> Is this the only supported format ? NXP AN13573 lists the following:
> >>>>
> >>>> i.MX 8/RT MIPI DSI/CSI-2, Rev. 0, 21 March 2022
> >>>> 3.7.4 Pixel formats
> >>>> Table 14. DSI pixel packing formats
> >>>>
> >>>> Loosely Packed Pixel Stream, 20-bit YCbCr, 4:2:2
> >>>> Packed Pixel Stream, 24-bit YCbCr, 4:2:2
> >>>> Packed Pixel Stream, 16-bit YCbCr, 4:2:2
> >>>
> >>> Look like these are unsupported in media-bus-format.h list.
> >>
> >> Aren't those:
> >>
> >> MEDIA_BUS_FMT_UYVY12_1X24
> >
> > Why is UYVY12 - YCbCr, 4:2:2 is 4+2+2 = 8 then it has UYVY8 ?
>
> (someone please correct me if I'm totally wrong here)
>
> The 12 is channel width (12 bit for each Y1/Y2/U/V channel sample).
> The 4:2:2 is subsampling (where are the color components sampled
> relative to brightness component).
>
> Picture is here:
> https://upload.wikimedia.org/wikipedia/commons/f/f2/Common_chroma_subsampling_ratios.svg
>
> Each Y square of the left is 12bit sample.
> Each U+V square is 12bit sample for U and 12bit sample for V.
>
> In case of 4:4:4 subsampling, each luminance (brightness) component has
> matching chrominance (color) components.
>
> In case of the 4:2:2 subsampling, two neighboring luminance components
> share two chrominance components. To transfer one pixel including color
> information, you have to transfer two pixels, Y0+U as 2x12bit sample in
> one cycle of 24bit bus, and then Y1+V as 2x12bit sample in another cycle
> of 24bit bus (2 clock cycles total, 4 samples total). From that you can
> reconstruct the two top-left squares (purple pixels) in the rightmost
> YUV column of 4:2:2 row.
>
> The entire trick is that because eye is less sensitive to color than it
> is to light, you can transfer less color information and thus save
> bandwidth without anyone noticing (much of it).
>
> >> MEDIA_BUS_FMT_UYVY8_1X16
> >
> > If YCbCr is UYVY (I still don't get this notation, sorry) then Packed
> > Pixel Stream, 24-bit YCbCr, 4:2:2 with 2 Pixels per packet from Table
> > 14 can be
> >
> > MEDIA_BUS_FMT_UYVY8_2X24
> > (YCbCr 4:2:2 is UYVY8)
> >
> >   " based on a reference example from media bus format doc
> > 4.13.3.4.1.1.3. Packed YUV Formats, For instance, a format where
> > pixels are encoded as 8-bit YUV values downsampled to 4:2:2 and
> > transferred as 2 8-bit bus samples per pixel in the U, Y, V, Y order
> > will be named MEDIA_BUS_FMT_UYVY8_2X8."
>
> The way I read the above is that the channel width of each channel is
> 8-bit , so you start with two pixels Y0/U/Y1/V which add up to 32bit
> total. That is transferred over 8-bit bus, in 4 bus cycles total. One
> pixel therefore takes 2 cycles of the 8 bit bus to transfer, even if you
> cannot transfer one pixel separately .
>
> > https://www.kernel.org/doc/html/latest/userspace-api/media/v4l/subdev-formats.html
> >
> > _2X24 here 2 Pixels per packet is the exact packets to consider or we
> > can consider 1 Pixel per packet also. If later is true then _1X24 from
> > your notation is correct.
>
> Since the DSIM input bus is 32bit wide, to transfer one such 4:2:2
> pixel, you need 1 bus cycle (2x12 bits per half of two pixels).

Thanks for your explanation. I need some time to understand and it
looks worth waiting for others to comment on this.

Meanwhile, I'm planning to send subsequent version patches with
possible supported formats like,

MEDIA_BUS_FMT_UYVY8_1X16,
MEDIA_BUS_FMT_RGB101010_1X30,
MEDIA_BUS_FMT_RGB121212_1X36,
MEDIA_BUS_FMT_RGB565_1X16,
MEDIA_BUS_FMT_RGB666_1X18,
MEDIA_BUS_FMT_RGB888_1X24,

Let me know.

Jagan.