[PATCH V2 0/3] AM68 SK: Add initial support

[Sinthu Raja]

From: Sinthu Raja <sinthu.raja at ti.com>

Hi,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC.

Refer below link to J721S2/AM68 Technical Reference Manual for further details: 
http://www.ti.com/lit/pdf/spruj28

Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Changes in  V2:
Addressed all the review comments and the changes are captured in seperate patches.
 - Updated the commit description.
 - Updated the regulator nodes: fixedregulator to "regulator-"
 - Updated the commit $subject to align with rest of the commits.
 - Dropped the blank lines
 - Changed the node names that are added with underscore("_") with "-"

V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc

Sinthu Raja (3):
  dt-bindings: arm: ti: Add binding for AM68 SK
  arm64: dts: ti: Add initial support for AM68 SK System on Module
  arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

 .../devicetree/bindings/arm/ti/k3.yaml        |   1 +
 arch/arm64/boot/dts/ti/Makefile               |   2 +
 .../boot/dts/ti/k3-am68-sk-base-board.dts     | 447 ++++++++++++++++++
 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi    | 127 +++++
 4 files changed, 577 insertions(+)
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
 create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi

-- 
2.36.1