[PATCH v1 7/7] ARM: dts: imx: Update i.MXRT1050.dtsi compatibles

[Jesse Taube]

Remove unused compatibles from i.MXRT1050.dtsi.
Change GPT clock-names to match documentation.

Cc: Giulio Benetti <giulio.benetti at benettiengineering.com>
Signed-off-by: Jesse Taube <Mr.Bossman075 at gmail.com>
---
 arch/arm/boot/dts/imxrt1050.dtsi | 11 +++++------
 1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imxrt1050.dtsi b/arch/arm/boot/dts/imxrt1050.dtsi
index 03e6a858a7be..8d79de239046 100644
--- a/arch/arm/boot/dts/imxrt1050.dtsi
+++ b/arch/arm/boot/dts/imxrt1050.dtsi
@@ -29,7 +29,7 @@ osc3M: osc3M {
 
 	soc {
 		lpuart1: serial at 40184000 {
-			compatible = "fsl,imxrt1050-lpuart", "fsl,imx7ulp-lpuart";
+			compatible = "fsl,imxrt1050-lpuart";
 			reg = <0x40184000 0x4000>;
 			interrupts = <20>;
 			clocks = <&clks IMXRT1050_CLK_LPUART1>;
@@ -40,7 +40,6 @@ lpuart1: serial at 40184000 {
 		iomuxc: pinctrl at 401f8000 {
 			compatible = "fsl,imxrt1050-iomuxc";
 			reg = <0x401f8000 0x4000>;
-			fsl,mux_mask = <0x7>;
 		};
 
 		anatop: anatop at 400d8000 {
@@ -83,7 +82,7 @@ edma1: dma-controller at 400e8000 {
 		};
 
 		usdhc1: mmc at 402c0000 {
-			compatible = "fsl,imxrt1050-usdhc", "fsl,imx6sl-usdhc";
+			compatible = "fsl,imxrt1050-usdhc";
 			reg = <0x402c0000 0x4000>;
 			interrupts = <110>;
 			clocks = <&clks IMXRT1050_CLK_IPG_PDOF>,
@@ -150,11 +149,11 @@ gpio5: gpio at 400c0000 {
 		};
 
 		gpt: timer at 401ec000 {
-			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt", "fsl,imx6sl-gpt";
+			compatible = "fsl,imxrt1050-gpt", "fsl,imx6dl-gpt";
 			reg = <0x401ec000 0x4000>;
 			interrupts = <100>;
-			clocks = <&osc3M>;
-			clock-names = "per";
+			clocks = <&osc3M>, <&osc3M>;
+			clock-names = "ipg", "per";
 		};
 	};
 };
-- 
2.37.2