[PATCH v6 3/5] arm64: dts: allwinner: a100: Add LED controller node

[Samuel Holland]

Allwinner A100 contains an LED controller. Add it to the devicetree.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

(no changes since v5)

Changes in v5:
 - New patch for v5

 arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
index 97e3e6907acd..2c90683145f2 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a100.dtsi
@@ -273,6 +273,20 @@ i2c3: i2c at 5002c00 {
 			#size-cells = <0>;
 		};
 
+		ledc: led-controller at 5018000 {
+			compatible = "allwinner,sun50i-a100-ledc";
+			reg = <0x5018000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_LEDC>, <&ccu CLK_LEDC>;
+			clock-names = "bus", "mod";
+			resets = <&ccu RST_BUS_LEDC>;
+			dmas = <&dma 42>;
+			dma-names = "tx";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		ths: thermal-sensor at 5070400 {
 			compatible = "allwinner,sun50i-a100-ths";
 			reg = <0x05070400 0x100>;
-- 
2.37.3