[PATCH v2 2/7] dt-bindings: phy: Add special clock for Allwinner H616 PHY

[Vinod Koul]

On 31-10-22, 11:13, Andre Przywara wrote:
> The USB PHY IP in the Allwinner H616 SoC requires a quirk that involves
> some resources from port 2's PHY and HCI IP. In particular the PMU clock
> for port 2 must be surely ungated before accessing the REG_HCI_PHY_CTL
> register of port 2. To allow each USB port to be controlled
> independently of port 2, we need a handle to that particular PMU clock
> in the *PHY* node, as the HCI and PHY part might be handled by separate
> drivers.
> 
> Add that clock to the requirements of the H616 PHY binding, so that a
> PHY driver can apply the quirk in isolation, without requiring help from
> port 2's HCI driver.

Applied, thanks

-- 
~Vinod