[PATCH 2/3] dt-bindings: imx6q-pcie: Handle various PD configurations
Alexander Stein
alexander.stein at ew.tq-group.com
Fri Nov 4 00:19:07 PDT 2022
Hi Marek,
Am Donnerstag, 3. November 2022, 17:25:46 CET schrieb Marek Vasut:
> On 11/3/22 13:32, Rob Herring wrote:
> > On Thu, Nov 3, 2022 at 3:29 AM Alexander Stein
> >
> > <alexander.stein at ew.tq-group.com> wrote:
> >> Hi Marek,
> >>
> >> Am Mittwoch, 2. November 2022, 22:57:28 CET schrieb Marek Vasut:
> >>> The i.MX SoCs have various power domain configurations routed into
> >>> the PCIe IP. MX6SX is the only one which contains 2 domains and also
> >>> uses power-domain-names. MX6QDL do not use any domains. All the rest
> >>> uses one domain and does not use power-domain-names anymore.
> >>>
> >>> Document all those configurations in the DT binding document.
> >>>
> >>> Signed-off-by: Marek Vasut <marex at denx.de>
> >>> ---
> >>> Cc: Fabio Estevam <festevam at gmail.com>
> >>> Cc: Lucas Stach <l.stach at pengutronix.de>
> >>> Cc: Richard Zhu <hongxing.zhu at nxp.com>
> >>> Cc: Rob Herring <robh+dt at kernel.org>
> >>> Cc: Shawn Guo <shawnguo at kernel.org>
> >>> Cc: linux-arm-kernel at lists.infradead.org
> >>> Cc: NXP Linux Team <linux-imx at nxp.com>
> >>> To: devicetree at vger.kernel.org
> >>> ---
> >>>
> >>> .../bindings/pci/fsl,imx6q-pcie.yaml | 47 ++++++++++++++-----
> >>> 1 file changed, 34 insertions(+), 13 deletions(-)
> >>>
> >>> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> >>> b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml index
> >>> 1cfea8ca72576..fc8d4d7b80b38 100644
> >>> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> >>> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> >>>
> >>> @@ -68,19 +68,6 @@ properties:
> >>> description: A phandle to an fsl,imx7d-pcie-phy node. Additional
> >>>
> >>> required properties for imx7d-pcie and imx8mq-pcie.
> >>>
> >>> - power-domains:
> >>> - items:
> >>> - - description: The phandle pointing to the DISPLAY domain for
> >>> - imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
> >>> - imx8mq-pcie.
> >>> - - description: The phandle pointing to the PCIE_PHY power domains
> >>> - for imx6sx-pcie.
> >>> -
> >>> - power-domain-names:
> >>> - items:
> >>> - - const: pcie
> >>> - - const: pcie_phy
> >>> -
> >>>
> >>> resets:
> >>> maxItems: 3
> >>> description: Phandles to PCIe-related reset lines exposed by SRC
> >>>
> >>> @@ -241,6 +228,40 @@ allOf:
> >>> - const: pcie_bus
> >>> - const: pcie_phy
> >>>
> >>> + - if:
> >>> + properties:
> >>> + compatible:
> >>> + contains:
> >>> + const: fsl,imx6sx-pcie
> >>> + then:
> >>> + properties:
> >>> + power-domains:
> >>> + items:
> >>> + - description: The phandle pointing to the DISPLAY domain
> >>> for
> >>> + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie
> >>> and
> >>> + imx8mq-pcie.
> >>> + - description: The phandle pointing to the PCIE_PHY power
> >>> domains + for imx6sx-pcie.
> >>> + power-domain-names:
> >>> + items:
> >>> + - const: pcie
> >>> + - const: pcie_phy
> >>> + else:
> >>> + if:
> >>> + not:
> >>> + properties:
> >>> + compatible:
> >>> + contains:
> >>> + enum:
> >>> + - fsl,imx6q-pcie
> >>> + - fsl,imx6qp-pcie
> >>> + then:
> >>> + properties:
> >>> + power-domains:
> >>> + description: |
> >>> + The phandle pointing to the DISPLAY domain for
> >>> imx6sx-pcie,
> >>> to + PCIE_PHY power domain for imx7d-pcie and imx8mq-pcie.
> >>> +
> >>
> >> Doesn't it makes more sense to keep the power-domains descriptions in the
> >> common part on top, as before, but adjust minItems/maxItems for each
> >> compatible?
> >
> > Yes. Keep properties defined at the top level.
>
> The problem I keep running into here is that if I apply patch like below
> (basically what you and Alex are suggesting), I get this warning:
>
> arch/arm64/boot/dts/freescale/imx8mm-board.dtb: pcie at 33800000:
> power-domains: [[86]] is too short
I guess you need this:
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
@@ -65,6 +65,7 @@ properties:
required properties for imx7d-pcie and imx8mq-pcie.
power-domains:
+ minItems: 1
items:
- description: The phandle pointing to the DISPLAY domain for
imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
I have a similar WIP change on my tree which add 'minItems: 1' to power-
domains and also sets 'maxItems: 1' to power-domains for everything being not
fsl,imx6sx-pcie.
Best regards,
Alexander
> I think that's because power-domains: contains items: and to validate
> that imx8mm.dtsi with pcie at 33800000 { power-domains = <&pgc_pcie>; };, I
> would need to get rid of those items: ? Which is what I did in the
> aforementioned patch for imx8m, that's why I removed it from the common
> part.
>
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> index 12c7baba489aa..ec5e8dfe541ea 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> @@ -68,6 +68,18 @@ properties:
> description: A phandle to an fsl,imx7d-pcie-phy node. Additional
> required properties for imx7d-pcie and imx8mq-pcie.
>
> + power-domains:
> + items:
> + - description: The phandle pointing to the DISPLAY domain for
> + imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
> + imx8mq-pcie.
> + - description: The phandle pointing to the PCIE_PHY power domains
> + for imx6sx-pcie.
> + power-domain-names:
> + items:
> + - const: pcie
> + - const: pcie_phy
> +
> resets:
> maxItems: 2
> description: Phandles to PCIe-related reset lines exposed by SRC
> @@ -235,16 +247,11 @@ allOf:
> then:
> properties:
> power-domains:
> - items:
> - - description: The phandle pointing to the DISPLAY domain for
> - imx6sx-pcie, to PCIE_PHY power domain for imx7d-pcie and
> - imx8mq-pcie.
> - - description: The phandle pointing to the PCIE_PHY power
> domains
> - for imx6sx-pcie.
> + minItems: 2
> + maxItems: 2
> power-domain-names:
> - items:
> - - const: pcie
> - - const: pcie_phy
> + minItems: 2
> + maxItems: 2
> else:
> if:
> not:
> @@ -257,9 +264,8 @@ allOf:
> then:
> properties:
> power-domains:
> - description: |
> - The phandle pointing to the DISPLAY domain for
> imx6sx-pcie, to
> - PCIE_PHY power domain for imx7d-pcie and imx8mq-pcie.
> + minItems: 1
> + maxItems: 1
>
> - if:
> properties:
More information about the linux-arm-kernel
mailing list