[v2 07/10] dts-bindings: phy: Add Cadence HDP-TX DP PHY bindings

Sandor Yu Sandor.yu at nxp.com
Thu Nov 3 23:44:57 PDT 2022


Add bindings for Cadence HDP-TX DisplayPort PHY.

Signed-off-by: Sandor Yu <Sandor.yu at nxp.com>
---
 .../bindings/phy/phy-cadence-hdptx-dp.yaml    | 70 +++++++++++++++++++
 1 file changed, 70 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml

diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml b/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml
new file mode 100644
index 000000000000..ab6f4e25c425
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/phy-cadence-hdptx-dp.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/phy-cadence-hdptx-dp.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence HDP(HDMI/DisplayPort) TX PHY for DisplayPort protocol binding
+
+description:
+  This binding describes the Cadence HDP-TX PHY for DispalyPort protocol.
+
+maintainers:
+  - Sandor Yu <sandor.yu at nxp.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,hdptx-dp-phy
+
+  reg:
+    description:
+      Offset of Cadence HDPTX APB configuration registers.
+
+  clocks:
+    items:
+      description:
+        PHY reference clock. Must contain an entry in clock-names.
+
+  clock-names:
+    items:
+      - const: refclk
+
+  "#phy-cells":
+    const: 0
+
+  cdns,num-lanes:
+    description:
+      Number of lanes.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 3, 4]
+    default: 4
+
+  cdns,max-bit-rate:
+    description:
+      Maximum DisplayPort link bit rate to use, in Mbps
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [2160, 2430, 2700, 3240, 4320, 5400]
+    default: 5400
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/phy/phy.h>
+    dp_phy: dp_phy at 32c00000 {
+        compatible = "cdns,hdptx-dp-phy";
+        reg = <0x32c00000 0x100000>;
+        #phy-cells = <0>;
+        clocks = <&hdmi_phy_27m>;
+        clock-names = "refclk";
+        cdns,num-lanes = <4>;
+        cdns,max-bit-rate = <5400>;
+    };
-- 
2.34.1




More information about the linux-arm-kernel mailing list