[PATCH 1/3] dt-bindings: Add bindings for aspeed pwm-tach.

[Billy Tsai]

On 2022/11/3, 5:20 AM, "Krzysztof Kozlowski" <krzk at kernel.org> wrote:

    On 31/10/2022 06:38, Billy Tsai wrote:
    > > +patternProperties:
    > > +  "^pwm(@[0-9a-f]+)?$":
    > > +    $ref: ../pwm/aspeed,ast2600-pwm.yaml

    > Full path, so: /schemas/pwm/aspeed,ast2600-pwm.yaml

    > Why unit addresses are optional?

    > > +
    > > +  "^tach(@[0-9a-f]+)?$":
    > > +    $ref: ../hwmon/aspeed,ast2600-tach.yaml

    > Ditto

    > Why unit addresses are optional?

The pwm_tach is not the bus. I will use
pwm:
    type: object
    $ref: "/schemas/pwm/aspeed,ast2600-pwm.yaml"

tach:
    type: object
    $ref: "/schemas/hwmon/aspeed,ast2600-tach.yaml"
to replace it.

    > > +
    > > +additionalProperties: false
    > > +
    > > +examples:
    > > +  - |
    > > +    #include <dt-bindings/clock/ast2600-clock.h>
    > > +    pwm_tach: pwm_tach at 1e610000 {

    > Node names should be generic.
    > https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

This is the mfd with pwm and tach, so they are combined as the node name.

    > No underscores in node names.

https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#table-1
I see that the underscore is the valid characters for node names.
Did I miss any information?

Thanks

Best Regards,
Billy Tsai