[PATCH v1 1/6] arm64: dts: verdin-imx8mp: improve pinctrl for vbus-supplies

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

As we are using two fixed regulators for Verdin USB_1_EN (SODIMM 155)
and Verdin USB_2_EN (SODIMM 185), those should be muxed as GPIOs rather
than OTG_PWR.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---

 arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
index cc3b0725ce06..97e88440a251 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
@@ -1221,7 +1221,7 @@ pinctrl_uart4: uart4grp {
 
 	pinctrl_usb1_vbus: usb1vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO12__USB1_OTG_PWR		0x19>;	/* SODIMM 155 */
+			<MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x106>;	/* SODIMM 155 */
 	};
 
 	/* USB_1_ID */
@@ -1232,7 +1232,7 @@ pinctrl_usb_1_id: usb1idgrp {
 
 	pinctrl_usb2_vbus: usb2vbusgrp {
 		fsl,pins =
-			<MX8MP_IOMUXC_GPIO1_IO14__USB2_OTG_PWR		0x19>;	/* SODIMM 185 */
+			<MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x106>;	/* SODIMM 185 */
 	};
 
 	/* On-module Wi-Fi */
-- 
2.36.1