[PATCH v2 1/2] arm64: dts: tqma8mpql: add PCIe support

Alexander Stein alexander.stein at ew.tq-group.com
Tue Nov 1 02:21:29 PDT 2022


Add PCIe support on TQMa8MPxL module on MBa8MPxL mainboard.

Signed-off-by: Alexander Stein <alexander.stein at ew.tq-group.com>
---
Changes in v2:
* Fix node name for PCIe refclkreq GPIO hog
* Fix node name for 9fgv0241

This is based on next-20221018 where imp8mp PCIe support has been
merged.

 .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts   | 42 ++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 1c440909f580..3165044e87f4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -8,6 +8,7 @@
 
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy-imx8-pcie.h>
 #include <dt-bindings/pwm/pwm.h>
 #include "imx8mp-tqma8mpql.dtsi"
 
@@ -48,6 +49,12 @@ backlight_lvds: backlight {
 		status = "disabled";
 	};
 
+	clk_xtal25: clk-xtal25 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
@@ -340,9 +347,16 @@ &gpio4 {
 			  "", "", "", "",
 			  "", "", "", "",
 			  "", "", "DP_IRQ", "DSI_EN",
-			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+			  "HDMI_OC#", "TEMP_EVENT#", "PCIE_REFCLK_OE#", "",
 			  "", "", "", "FAN_PWR",
 			  "RTC_EVENT#", "CODEC_RST#", "", "";
+
+	pcie-refclkreq-hog {
+		gpio-hog;
+		gpios = <22 0>;
+		output-high;
+		line-name = "PCIE_REFCLK_OE#";
+	};
 };
 
 &gpio5 {
@@ -377,6 +391,13 @@ at24c02_54: eeprom at 54 {
 		pagesize = <16>;
 		vcc-supply = <&reg_vcc_3v3>;
 	};
+
+	pcieclk: clock-generator at 6a {
+		compatible = "renesas,9fgv0241";
+		reg = <0x6a>;
+		clocks = <&clk_xtal25>;
+		#clock-cells = <1>;
+	};
 };
 
 &i2c4 {
@@ -407,6 +428,25 @@ &pcf85063 {
 	interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
 };
 
+&pcie_phy {
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	clocks = <&pcieclk 0>;
+	clock-names = "ref";
+	status = "okay";
+};
+
+&pcie {
+	clocks = <&clk IMX8MP_CLK_HSIO_ROOT>,
+		 <&clk IMX8MP_CLK_HSIO_AXI>,
+		 <&clk IMX8MP_CLK_PCIE_ROOT>;
+	clock-names = "pcie", "pcie_bus", "pcie_aux";
+	assigned-clocks = <&clk IMX8MP_CLK_PCIE_AUX>;
+	assigned-clock-rates = <10000000>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_50M>;
+	status = "okay";
+};
+
 &pwm2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pwm2>;
-- 
2.34.1




More information about the linux-arm-kernel mailing list