[PATCH 12/14] dt-bindings: leds: Add Mediatek MT6370 flashlight binding documentation

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Tue May 31 13:40:12 PDT 2022


On 31/05/2022 12:42, ChiaEn Wu wrote:
> From: Alice Chen <alice_chen at richtek.com>
> 

Subject - same comment as previous #10 patch.

> Add Mediatek MT6370 flashlight binding documentation
> 
> Signed-off-by: Alice Chen <alice_chen at richtek.com>
> ---
>  .../leds/mediatek,mt6370-flashlight.yaml      | 48 +++++++++++++++++++
>  1 file changed, 48 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
> 
> diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
> new file mode 100644
> index 000000000000..b1b11bd3d410
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-flashlight.yaml
> @@ -0,0 +1,48 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/leds/leds-mt6370-flashlight.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Flash LED driver for MT6370 PMIC from MediaTek Integrated.
> +
> +maintainers:
> +  - Alice Chen <alice_chen at richtek.com>
> +
> +description: |
> +  This module is part of the MT6370 MFD device.
> +  see Documentation/devicetree/bindings/mfd/mt6370.yaml
> +  Add MT6370 flash LED driver include 2-channel flash LED support Torch/Strobe Mode.
> +
> +properties:
> +  compatible:
> +    const: mediatek,mt6370-flashlight
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +patternProperties:
> +  "^led@[0-1]$":
> +    type: object
> +    $ref: common.yaml#
> +    description:
> +      Properties for a single flash LED.

Same as patch #11.

> +
> +    properties:
> +      reg:
> +        description: Index of the flash LED.

As well.

> +        enum:
> +          - 0 #Address of LED1
> +          - 1 #Address of LED2

'#' starts a comment, so there is always a space after '#'

> +
> +    unevaluatedProperties: false
> +
> +required:
> +  - compatible
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +additionalProperties: false


Best regards,
Krzysztof



More information about the linux-arm-kernel mailing list