[PATCH] clk: imx: clk-fracn-gppll: Return rate in rate table properly in ->recalc_rate()

[Liu Ying]

Hi Peng,

On Mon, 2022-05-30 at 17:08 +0800, Peng Fan wrote:
> > Subject: RE: [PATCH] clk: imx: clk-fracn-gppll: Return rate in rate
> > table properly
> > in ->recalc_rate()
> > 
> > > Subject: [PATCH] clk: imx: clk-fracn-gppll: Return rate in rate
> > > table
> > > properly in
> > > ->recalc_rate()
> > > 
> > > The PLL parameters in rate table should be directly compared with
> > > those read from PLL registers instead of the cooked ones.
> > > 
> > > Fixes: 1b26cb8a77a4 ("clk: imx: support fracn gppll")
> > > Cc: Abel Vesa <abel.vesa at nxp.com>
> > > Cc: Michael Turquette <mturquette at baylibre.com>
> > > Cc: Stephen Boyd <sboyd at kernel.org>
> > > Cc: Shawn Guo <shawnguo at kernel.org>
> > > Cc: Sascha Hauer <s.hauer at pengutronix.de>
> > > Cc: Pengutronix Kernel Team <kernel at pengutronix.de>
> > > Cc: Fabio Estevam <festevam at gmail.com>
> > > Cc: NXP Linux Team <linux-imx at nxp.com>
> > > Cc: Peng Fan <peng.fan at nxp.com>
> > > Signed-off-by: Liu Ying <victor.liu at nxp.com>
> > 
> > Reviewed-by: Peng Fan <peng.fan at nxp.com>
> > 
> > > ---
> > >  drivers/clk/imx/clk-fracn-gppll.c | 24 +++++++++++++-----------
> > >  1 file changed, 13 insertions(+), 11 deletions(-)
> > > 
> > > diff --git a/drivers/clk/imx/clk-fracn-gppll.c
> > > b/drivers/clk/imx/clk-fracn-gppll.c
> > > index 71c102d950ab..762b07dd5a6d 100644
> > > --- a/drivers/clk/imx/clk-fracn-gppll.c
> > > +++ b/drivers/clk/imx/clk-fracn-gppll.c
> > > @@ -131,18 +131,7 @@ static unsigned long
> > > clk_fracn_gppll_recalc_rate(struct clk_hw *hw, unsigned lon
> > >  	mfi = FIELD_GET(PLL_MFI_MASK, pll_div);
> > > 
> > >  	rdiv = FIELD_GET(PLL_RDIV_MASK, pll_div);
> > > -	rdiv = rdiv + 1;
> > >  	odiv = FIELD_GET(PLL_ODIV_MASK, pll_div);
> > > -	switch (odiv) {
> > > -	case 0:
> > > -		odiv = 2;
> > > -		break;
> > > -	case 1:
> > > -		odiv = 3;
> > > -		break;
> > > -	default:
> > > -		break;
> > > -	}
> > > 
> > >  	/*
> > >  	 * Sometimes, the recalculated rate has deviation due to @@
> > > -160,6
> > > +149,19 @@ static unsigned long
> > > clk_fracn_gppll_recalc_rate(struct
> > > +clk_hw
> > > *hw, unsigned lon
> > >  	if (rate)
> > >  		return (unsigned long)rate;
> > > 
> > > +	rdiv = rdiv + 1;
> 
> After check more:
> According to doc, needs add a check here:
> if (!rdiv)
>  rdiv = rdiv + 1;

This new check is not something this patch tries to deal with.
Maybe, you may send a separate patch to add the check.

Regards,
Liu Ying

> 
> Regards,
> Peng.
> > > +
> > > +	switch (odiv) {
> > > +	case 0:
> > > +		odiv = 2;
> > > +		break;
> > > +	case 1:
> > > +		odiv = 3;
> > > +		break;
> > > +	default:
> > > +		break;
> > > +	}
> > > +
> > >  	/* Fvco = Fref * (MFI + MFN / MFD) */
> > >  	fvco = fvco * mfi * mfd + fvco * mfn;
> > >  	do_div(fvco, mfd * rdiv * odiv);
> > > --
> > > 2.25.1
> 
>