[PATCH 2/3] dts: socfpga: Add Google Chameleon v3 devicetree

[Krzysztof Kozlowski]

On 30/05/2022 15:08, Paweł Anikiel wrote:
> Add devicetree for the Google Chameleon v3 board.
> 
> Signed-off-by: Paweł Anikiel <pan at semihalf.com>
> Signed-off-by: Alexandru M Stan <amstan at chromium.org>

Your SoB chain looks odd. Who did what here?

> ---
>  arch/arm/boot/dts/Makefile                    |  1 +
>  .../boot/dts/socfpga_arria10_chameleonv3.dts  | 90 +++++++++++++++++++
>  2 files changed, 91 insertions(+)
>  create mode 100644 arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 023c8b4ba45c..9417106d3289 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1146,6 +1146,7 @@ dtb-$(CONFIG_ARCH_S5PV210) += \
>  	s5pv210-torbreck.dtb
>  dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
>  	socfpga_arria5_socdk.dtb \
> +	socfpga_arria10_chameleonv3.dtb \
>  	socfpga_arria10_socdk_nand.dtb \
>  	socfpga_arria10_socdk_qspi.dtb \
>  	socfpga_arria10_socdk_sdmmc.dtb \
> diff --git a/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
> new file mode 100644
> index 000000000000..988cc445438e
> --- /dev/null
> +++ b/arch/arm/boot/dts/socfpga_arria10_chameleonv3.dts
> @@ -0,0 +1,90 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2022 Google LLC
> + */
> +/dts-v1/;
> +#include "socfpga_arria10_mercury_aa1.dtsi"
> +
> +/ {
> +	model = "Google Chameleon V3";
> +	compatible = "google,chameleon-v3",

You miss here enclustra compatible.

> +		     "altr,socfpga-arria10", "altr,socfpga";
> +
> +	aliases {
> +		serial0 = &uart0;
> +		i2c0 = &i2c0;
> +		i2c1 = &i2c1;
> +	};
> +};
> +
> +&gmac0 {
> +	status = "okay";
> +};
> +
> +&gpio0 {
> +	status = "okay";
> +};
> +
> +&gpio1 {
> +	status = "okay";
> +};
> +
> +&gpio2 {
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";
> +
> +	ssm2603: ssm2603 at 1a {

Generic node names.

> +		compatible = "adi,ssm2603";
> +		reg = <0x1a>;
> +	};
> +};
> +
> +&i2c1 {
> +	status = "okay";
> +
> +	u80: u80 at 21 {
> +		compatible = "nxp,pca9535";

Generic node names.



Best regards,
Krzysztof