[PATCH 2/2] arm64: dts: rockchip: Add initial support for Pine64 PinePhone Pro

[Krzysztof Kozlowski]

On 29/05/2022 05:17, Tom Fitzhenry wrote:
> This is a basic DT that includes only features that are already
> supported by mainline drivers.
> 
> Tested to work: booting from eMMC, WiFi, charging.
> 
> Future patches will flesh out the DT. Some components, e.g. the panel,
> are awaiting driver mainlining.
> 
> This is derived from a combination of https://gitlab.com/pine64-org/linux
> and https://megous.com/git/linux.
> 
> https://wiki.pine64.org/wiki/PinePhone_Pro
> 
> Co-developed-by: Ondrej Jirman <megous at megous.com>
> Co-developed-by: Martijn Braam <martijn at brixit.nl>
> Signed-off-by: Tom Fitzhenry <tom at tom-fitzhenry.me.uk>
> ---
>  arch/arm64/boot/dts/rockchip/Makefile         |   1 +
>  .../dts/rockchip/rk3399-pinephone-pro.dts     | 939 ++++++++++++++++++
>  2 files changed, 940 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> 
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index 4ae9f35434b8..c00e7922d974 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-r4s.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-orangepi.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinebook-pro.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pinephone-pro.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
>  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> new file mode 100644
> index 000000000000..b1a486db1dfe
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
> @@ -0,0 +1,939 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2020 Martijn Braam <martijn at brixit.nl>
> + * Copyright (c) 2021 Kamil Trzciński <ayufan at ayufan.eu>
> + */
> +
> +// PinePhone Pro datasheet: https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
> +
> +/dts-v1/;
> +#include <dt-bindings/input/gpio-keys.h>
> +#include <dt-bindings/input/linux-event-codes.h>
> +#include <dt-bindings/usb/pd.h>
> +#include <dt-bindings/leds/common.h>
> +#include "rk3399.dtsi"
> +#include "rk3399-opp.dtsi"
> +
> +/ {
> +	model = "Pine64 PinePhonePro";
> +	compatible = "pine64,pinephone-pro", "rockchip,rk3399";
> +
> +	chosen {
> +		bootargs = "earlycon=uart8250,mmio32,0xff1a0000";

earlycon is debugging piece so it should not be in generic DTS.

Best regards,
Krzysztof