[PATCH 1/3] ARM: dts: add dts files for bcmbca soc 6878

[Anand Gore]

Add dts for ARMv7 based broadband SoC BCM6878. bcm63178.dtsi is the
SoC description dts header and bcm96878.dts is a simple dts file for
Broadcom BCM96878 Reference board that only enable the UART port.

Signed-off-by: Anand Gore <anand.gore at broadcom.com>
---

 arch/arm/boot/dts/Makefile     |   3 +-
 arch/arm/boot/dts/bcm6878.dtsi | 109 +++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm96878.dts |  30 +++++++++
 3 files changed, 141 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/boot/dts/bcm6878.dtsi
 create mode 100644 arch/arm/boot/dts/bcm96878.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index d9ac59524408..553fef458926 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -183,7 +183,8 @@ dtb-$(CONFIG_ARCH_BRCMSTB) += \
 	bcm7445-bcm97445svmb.dtb
 dtb-$(CONFIG_ARCH_BCMBCA) += \
 	bcm947622.dtb \
-	bcm963178.dtb
+	bcm963178.dtb \
+	bcm96878.dtb
 dtb-$(CONFIG_ARCH_CLPS711X) += \
 	ep7211-edb7211.dtb
 dtb-$(CONFIG_ARCH_DAVINCI) += \
diff --git a/arch/arm/boot/dts/bcm6878.dtsi b/arch/arm/boot/dts/bcm6878.dtsi
new file mode 100644
index 000000000000..167a3f78f1f4
--- /dev/null
+++ b/arch/arm/boot/dts/bcm6878.dtsi
@@ -0,0 +1,109 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022 Broadcom Ltd.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	compatible = "brcm,bcm6878", "brcm,bcmbca";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		CA7_0: cpu at 0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+
+		CA7_1: cpu at 1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			next-level-cache = <&L2_0>;
+			enable-method = "psci";
+		};
+		L2_0: l2-cache0 {
+			compatible = "cache";
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+		arm,cpu-registers-not-fw-configured;
+	};
+
+	pmu: pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+			<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&CA7_0>, <&CA7_1>;
+	};
+
+	clocks: clocks {
+		periph_clk: periph-clk {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <200000000>;
+		};
+		uart_clk: uart-clk {
+			compatible = "fixed-factor-clock";
+			#clock-cells = <0>;
+			clocks = <&periph_clk>;
+			clock-div = <4>;
+			clock-mult = <1>;
+		};
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+		cpu_off = <1>;
+		cpu_on = <2>;
+	};
+
+	axi at 81000000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x81000000 0x4000>;
+
+		gic: interrupt-controller at 1000 {
+			compatible = "arm,cortex-a7-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0x1000 0x1000>,
+				<0x2000 0x2000>;
+		};
+	};
+
+	bus at ff800000 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0xff800000 0x800000>;
+
+		uart0: serial at 12000 {
+			compatible = "arm,pl011", "arm,primecell";
+			reg = <0x12000 0x1000>;
+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&uart_clk>, <&uart_clk>;
+			clock-names = "uartclk", "apb_pclk";
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/bcm96878.dts b/arch/arm/boot/dts/bcm96878.dts
new file mode 100644
index 000000000000..8fbc175cb452
--- /dev/null
+++ b/arch/arm/boot/dts/bcm96878.dts
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2019 Broadcom Ltd.
+ */
+
+/dts-v1/;
+
+#include "bcm6878.dtsi"
+
+/ {
+	model = "Broadcom BCM96878 Reference Board";
+	compatible = "brcm,bcm96878", "brcm,bcm6878", "brcm,bcmbca";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory at 0 {
+		device_type = "memory";
+		reg = <0x0 0x08000000>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
-- 
2.25.1

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 4203 bytes
Desc: S/MIME Cryptographic Signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20220527/0fbe0560/attachment-0001.p7s>