[PATCH 1/2] arm64: dts: amlogic: adjust whitespace around '='
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Thu May 26 13:45:51 PDT 2022
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
Output compared with dtx_diff and fdtdump.
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 2 +-
arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 2 +-
.../boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 3f5254eeb47b..04f797b5a012 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1535,7 +1535,7 @@ aobus: bus at ff800000 {
sysctrl_AO: sys-ctrl at 0 {
compatible = "amlogic,meson-axg-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
+ reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-axg-aoclkc";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index aa14ea017a61..023a52005494 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -450,7 +450,7 @@ aobus: bus at c8100000 {
sysctrl_AO: sys-ctrl at 0 {
compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
- reg = <0x0 0x0 0x0 0x100>;
+ reg = <0x0 0x0 0x0 0x100>;
clkc_AO: clock-controller {
compatible = "amlogic,meson-gx-aoclkc";
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
index fcb304c5a40f..6831137c5c10 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905w-jethome-jethub-j80.dts
@@ -216,7 +216,7 @@ &uart_A {
bluetooth {
compatible = "realtek,rtl8822cs-bt";
- enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ enable-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
host-wake-gpios = <&gpio GPIOX_18 GPIO_ACTIVE_HIGH>;
};
};
--
2.34.1
More information about the linux-arm-kernel
mailing list