[PATCH 1/2] arm64: dts: marvell: adjust whitespace around '='

[Krzysztof Kozlowski]

Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment.  No functional
changes (same DTB).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

---

Output compared with dtx_diff and fdtdump.
---
 arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts    | 4 ++--
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi      | 2 +-
 arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts | 4 ++--
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi              | 2 +-
 4 files changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 39a8e5e99d79..b9ba7c452a77 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -37,7 +37,7 @@ sfp_eth0: sfp-eth0 {
 		los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
 	};
 
 	/* SFP 1G */
@@ -47,7 +47,7 @@ sfp_eth2: sfp-eth2 {
 		los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 779cf167c33e..c0389dd17340 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -68,7 +68,7 @@ sfp_eth0: sfp-eth0 {
 		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
 		maximum-power-milliwatt = <2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 74bed79e4f5e..cf868e0bbb9c 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -70,7 +70,7 @@ sfp_cp0_eth0: sfp-cp0-eth0 {
 		los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 
@@ -80,7 +80,7 @@ sfp_cp1_eth0: sfp-cp1-eth0 {
 		los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
 		mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
 		tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpio = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 7e20987253a3..f58402eb9536 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -404,7 +404,7 @@ &cp0_usb3_0 {
 &cp0_usb3_1 {
 	status = "okay";
 	usb-phy = <&cp0_usb3_0_phy1>;
-	phys =  <&cp0_utmi1>;
+	phys = <&cp0_utmi1>;
 	phy-names = "utmi";
 	dr_mode = "host";
 };
-- 
2.34.1