[PATCH 1/2] arm64: dts: fsl: adjust whitespace around '='
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Thu May 26 13:42:56 PDT 2022
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
Output compared with dtx_diff and fdtdump.
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 8 ++++----
.../arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 2 +-
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 10 +++++-----
.../arm64/boot/dts/freescale/fsl-lx2160a-qds.dts | 4 ++--
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
.../arm64/boot/dts/freescale/fsl-lx2162a-qds.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi | 10 +++++-----
.../dts/freescale/imx8mm-beacon-baseboard.dtsi | 4 ++--
.../boot/dts/freescale/imx8mm-icore-mx8mm.dtsi | 12 ++++++------
.../boot/dts/freescale/imx8mm-venice-gw700x.dtsi | 16 ++++++++--------
arch/arm64/boot/dts/freescale/imx8mm.dtsi | 8 ++++----
.../dts/freescale/imx8mn-beacon-baseboard.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mn.dtsi | 10 +++++-----
arch/arm64/boot/dts/freescale/imx8mp.dtsi | 8 ++++----
.../arm64/boot/dts/freescale/imx8mq-nitrogen.dts | 4 ++--
.../boot/dts/freescale/imx8mq-zii-ultra.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 4 ++--
.../dts/freescale/imx8qxp-colibri-eval-v3.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 6 +++---
24 files changed, 88 insertions(+), 88 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 50a72cda4727..e54910b163a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -204,7 +204,7 @@ sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -212,7 +212,7 @@ sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -220,7 +220,7 @@ sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -228,7 +228,7 @@ sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index 5baf060acf93..0bb2f28a0441 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -93,7 +93,7 @@ mdio-mux {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&enetc_mdio_pf3>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
/* on-board RGMII PHY */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 92465f777603..3376eeab84ba 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -96,7 +96,7 @@ optee: optee {
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&rst>;
offset = <0>;
mask = <0x02>;
@@ -120,13 +120,13 @@ pmu {
};
gic: interrupt-controller at 6000000 {
- compatible= "arm,gic-v3";
+ compatible = "arm,gic-v3";
#address-cells = <2>;
#size-cells = <2>;
ranges;
- reg= <0x0 0x06000000 0 0x10000>, /* GIC Dist */
+ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06040000 0 0x40000>; /* GIC Redistributor */
- #interrupt-cells= <3>;
+ #interrupt-cells = <3>;
interrupt-controller;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_RAW(0xf) |
IRQ_TYPE_LEVEL_LOW)>;
@@ -769,28 +769,28 @@ crypto: crypto at 8000000 {
sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 21200cbf7161..bb5708e141a5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -144,7 +144,7 @@ sysclk: sysclk {
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
@@ -354,7 +354,7 @@ sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <0 71 0x4>;
};
@@ -362,7 +362,7 @@ sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <0 72 0x4>;
};
@@ -370,7 +370,7 @@ sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <0 73 0x4>;
};
@@ -378,7 +378,7 @@ sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <0 74 0x4>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 0085e83adf65..3690bc1ce497 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -112,7 +112,7 @@ sysclk: sysclk {
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&dcfg>;
offset = <0xb0>;
mask = <0x02>;
@@ -360,7 +360,7 @@ sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -368,7 +368,7 @@ sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -376,7 +376,7 @@ sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
};
@@ -384,7 +384,7 @@ sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.4-job-ring",
"fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index f476b7d8b056..1456364ab795 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -526,28 +526,28 @@ crypto: crypto at 8000000 {
sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index 4ba1e0499dfd..3692d4cf6fcf 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -73,7 +73,7 @@ rstcr: syscon at 1e60000 {
};
reboot {
- compatible ="syscon-reboot";
+ compatible = "syscon-reboot";
regmap = <&rstcr>;
offset = <0x0>;
mask = <0x2>;
@@ -479,28 +479,28 @@ crypto: crypto at 8000000 {
sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
index 2ecfa90f5e28..4d721197d837 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-qds.dts
@@ -36,7 +36,7 @@ mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio at 0 { /* On-board PHY #1 RGMI1*/
@@ -104,7 +104,7 @@ mdio-mux-2 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio at 0 { /* Slot #1 (secondary EMI) */
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 47ea854720ce..2f834f688bbe 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -632,28 +632,28 @@ crypto: crypto at 8000000 {
sec_jr0: jr at 10000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x10000 0x10000>;
+ reg = <0x10000 0x10000>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr1: jr at 20000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x20000 0x10000>;
+ reg = <0x20000 0x10000>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr2: jr at 30000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x30000 0x10000>;
+ reg = <0x30000 0x10000>;
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
};
sec_jr3: jr at 40000 {
compatible = "fsl,sec-v5.0-job-ring",
"fsl,sec-v4.0-job-ring";
- reg = <0x40000 0x10000>;
+ reg = <0x40000 0x10000>;
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
index a1644ceed154..9f5ff1ffe7d5 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts
@@ -34,7 +34,7 @@ mdio-mux-1 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 0>;
mdio-parent-bus = <&emdio1>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio at 0 { /* On-board RTL8211F PHY #1 RGMII1 */
@@ -114,7 +114,7 @@ mdio-mux-2 {
compatible = "mdio-mux-multiplexer";
mux-controls = <&mux 1>;
mdio-parent-bus = <&emdio2>;
- #address-cells=<1>;
+ #address-cells = <1>;
#size-cells = <0>;
mdio at 0 { /* Slot #1 (secondary EMI) */
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
index a79f42a9618e..82a1c4488378 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
@@ -54,7 +54,7 @@ usdhc2: mmc at 5b020000 {
clock-names = "ipg", "per", "ahb";
power-domains = <&pd IMX_SC_R_SDHC_1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
status = "disabled";
};
@@ -83,8 +83,8 @@ fec1: ethernet at 5b040000 {
assigned-clocks = <&clk IMX_SC_R_ENET_0 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_0 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
power-domains = <&pd IMX_SC_R_ENET_0>;
status = "disabled";
};
@@ -103,8 +103,8 @@ fec2: ethernet at 5b050000 {
assigned-clocks = <&clk IMX_SC_R_ENET_1 IMX_SC_PM_CLK_PER>,
<&clk IMX_SC_R_ENET_1 IMX_SC_C_CLKDIV>;
assigned-clock-rates = <250000000>, <125000000>;
- fsl,num-tx-queues=<3>;
- fsl,num-rx-queues=<3>;
+ fsl,num-tx-queues = <3>;
+ fsl,num-rx-queues = <3>;
power-domains = <&pd IMX_SC_R_ENET_1>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
index f338a886d811..03266bd90a06 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi
@@ -285,14 +285,14 @@ &uart3 {
&usbotg1 {
vbus-supply = <®_usbotg1>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
&usbotg2 {
pinctrl-names = "default";
disable-over-current;
- dr_mode="host";
+ dr_mode = "host";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
index b40148d728ea..9e6170d9394e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-icore-mx8mm.dtsi
@@ -84,42 +84,42 @@ reg_ldo4: ldo4 {
};
reg_buck1: buck1 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck2: buck2 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck3: buck3 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck4: buck4 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck5: buck5 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
reg_buck6: buck6 {
- regulator-min-microvolt = <400000>;
+ regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
index 00f86cada30d..8a496aa09072 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw700x.dtsi
@@ -286,8 +286,8 @@ buck1 {
regulator-name = "buck1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-boot-on;
regulator-always-on;
};
@@ -297,8 +297,8 @@ buck2 {
regulator-name = "buck2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
@@ -308,8 +308,8 @@ buck3_reg: buck3 {
regulator-name = "buck3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1000000>;
- regulator-min-microamp = <3800000>;
- regulator-max-microamp = <6800000>;
+ regulator-min-microamp = <3800000>;
+ regulator-max-microamp = <6800000>;
regulator-always-on;
};
@@ -318,8 +318,8 @@ buck4 {
regulator-name = "buck4";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
- regulator-min-microamp = <2200000>;
- regulator-max-microamp = <5200000>;
+ regulator-min-microamp = <2200000>;
+ regulator-max-microamp = <5200000>;
regulator-boot-on;
regulator-always-on;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index 1bf070473829..eb02244fa554 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -212,7 +212,7 @@ clk_ext3: clock-ext3 {
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -995,7 +995,7 @@ usdhc1: mmc at 30b40000 {
<&clk IMX8MM_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -1009,7 +1009,7 @@ usdhc2: mmc at 30b50000 {
<&clk IMX8MM_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -1023,7 +1023,7 @@ usdhc3: mmc at 30b60000 {
<&clk IMX8MM_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
index 02f37dcda7ed..9e82069c941f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-beacon-baseboard.dtsi
@@ -146,7 +146,7 @@ wm8962: audio-codec at 1a {
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
@@ -182,7 +182,7 @@ &uart3 {
&usbotg1 {
vbus-supply = <®_usb_otg_vbus>;
disable-over-current;
- dr_mode="otg";
+ dr_mode = "otg";
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index d1f6cccfa00d..8db9d1122ca0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -78,7 +78,7 @@ sound-spdif {
};
&easrc {
- fsl,asrc-rate = <48000>;
+ fsl,asrc-rate = <48000>;
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index e41e1d56f980..b773660c34a7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -212,7 +212,7 @@ clk_ext3: clock-ext3 {
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -422,7 +422,7 @@ easrc: easrc at 300c0000 {
"ctx2_rx", "ctx2_tx",
"ctx3_rx", "ctx3_tx";
firmware-name = "imx/easrc/easrc-imx8mn.bin";
- fsl,asrc-rate = <8000>;
+ fsl,asrc-rate = <8000>;
fsl,asrc-format = <2>;
status = "disabled";
};
@@ -941,7 +941,7 @@ usdhc1: mmc at 30b40000 {
<&clk IMX8MN_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -955,7 +955,7 @@ usdhc2: mmc at 30b50000 {
<&clk IMX8MN_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -969,7 +969,7 @@ usdhc3: mmc at 30b60000 {
<&clk IMX8MN_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index d9542dfff83f..b2f4a5f1f73c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -195,7 +195,7 @@ clk_ext3: clock-ext3 {
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -903,7 +903,7 @@ usdhc1: mmc at 30b40000 {
<&clk IMX8MP_CLK_USDHC1_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -917,7 +917,7 @@ usdhc2: mmc at 30b50000 {
<&clk IMX8MP_CLK_USDHC2_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -931,7 +931,7 @@ usdhc3: mmc at 30b60000 {
<&clk IMX8MP_CLK_USDHC3_ROOT>;
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
index f70fb32b96b0..a89546b39095 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-nitrogen.dts
@@ -152,7 +152,7 @@ reg_arm_dram: regulator at 60 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_arm_dram>;
reg = <0x60>;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
vsel-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
@@ -186,7 +186,7 @@ reg_soc_gpu_vpu: regulator at 60 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_soc_gpu_vpu>;
reg = <0x60>;
- regulator-min-microvolt = <900000>;
+ regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
vsel-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
index 2222ef7b3eab..4e05120c62d4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-zii-ultra.dtsi
@@ -443,7 +443,7 @@ &i2c3 {
status = "okay";
usbhub: usbhub at 2c {
- compatible ="microchip,usb2513b";
+ compatible = "microchip,usb2513b";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
reg = <0x2c>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 49eadb081b19..8a1c69699053 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -94,7 +94,7 @@ clk_ext3: clock-ext3 {
clk_ext4: clock-ext4 {
compatible = "fixed-clock";
#clock-cells = <0>;
- clock-frequency= <133000000>;
+ clock-frequency = <133000000>;
clock-output-names = "clk_ext4";
};
@@ -507,7 +507,7 @@ tmu: tmu at 30260000 {
<0x00030005 0x00000053>,
<0x00030006 0x0000005f>,
<0x00030007 0x00000071>;
- #thermal-sensor-cells = <1>;
+ #thermal-sensor-cells = <1>;
};
wdog1: watchdog at 30280000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
index 144fc9e82da7..e3f161a10448 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-colibri-eval-v3.dtsi
@@ -38,17 +38,17 @@ rtc_i2c: rtc at 68 {
/* Colibri UART_B */
&lpuart0 {
- status= "okay";
+ status = "okay";
};
/* Colibri UART_C */
&lpuart2 {
- status= "okay";
+ status = "okay";
};
/* Colibri UART_A */
&lpuart3 {
- status= "okay";
+ status = "okay";
};
/* Colibri FastEthernet */
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
index 09f7364dd1d0..ba281e689cf6 100644
--- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
@@ -331,7 +331,7 @@ usdhc0: mmc at 298d0000 {
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -346,7 +346,7 @@ usdhc1: mmc at 298e0000 {
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
@@ -361,7 +361,7 @@ usdhc2: mmc at 298f0000 {
clock-names = "ipg", "ahb", "per";
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
fsl,tuning-start-tap = <20>;
- fsl,tuning-step= <2>;
+ fsl,tuning-step = <2>;
bus-width = <4>;
status = "disabled";
};
--
2.34.1
More information about the linux-arm-kernel
mailing list