[PATCH 1/2] ARM: dts: sti: adjust whitespace around '='
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Thu May 26 13:36:31 PDT 2022
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
Output compared with dtx_diff and fdtdump.
---
arch/arm/boot/dts/stih407-family.dtsi | 174 +++++++++++++-------------
arch/arm/boot/dts/stih407.dtsi | 4 +-
arch/arm/boot/dts/stih410.dtsi | 4 +-
arch/arm/boot/dts/stihxxx-b2120.dtsi | 8 +-
4 files changed, 95 insertions(+), 95 deletions(-)
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 1713f7878117..33cf54cb46cc 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -137,8 +137,8 @@ picophyreset: picophyreset-controller {
};
irq-syscfg {
- compatible = "st,stih407-irq-syscfg";
- st,syscfg = <&syscfg_core>;
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
<ST_IRQ_SYSCFG_PMU_1>;
st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
@@ -157,8 +157,8 @@ usb2_picophy0: phy1 {
miphy28lp_phy: miphy28lp {
compatible = "st,miphy28lp-phy";
st,syscfg = <&syscfg_core>;
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
ranges;
phy_port0: port at 9b22000 {
@@ -208,26 +208,26 @@ phy_port2: port at 8f95000 {
};
st231_gp0: st231-gp0 {
- compatible = "st,st231-rproc";
- memory-region = <&gp0_reserved>;
- resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x22c>;
+ compatible = "st,st231-rproc";
+ memory-region = <&gp0_reserved>;
+ resets = <&softreset STIH407_ST231_GP0_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_GP_0>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x22c>;
#mbox-cells = <1>;
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
mboxes = <&mailbox0 0 2>, <&mailbox2 0 1>, <&mailbox0 0 3>, <&mailbox2 0 0>;
};
st231_delta: st231-delta {
- compatible = "st,st231-rproc";
- memory-region = <&delta_reserved>;
- resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
- reset-names = "sw_reset";
- clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
- clock-frequency = <600000000>;
- st,syscfg = <&syscfg_core 0x224>;
+ compatible = "st,st231-rproc";
+ memory-region = <&delta_reserved>;
+ resets = <&softreset STIH407_ST231_DMU_SOFTRESET>;
+ reset-names = "sw_reset";
+ clocks = <&clk_s_c0_flexgen CLK_ST231_DMU>;
+ clock-frequency = <600000000>;
+ st,syscfg = <&syscfg_core 0x224>;
#mbox-cells = <1>;
mbox-names = "vq0_rx", "vq0_tx", "vq1_rx", "vq1_tx";
mboxes = <&mailbox0 0 0>, <&mailbox3 0 1>, <&mailbox0 0 1>, <&mailbox3 0 0>;
@@ -710,78 +710,78 @@ sata1: sata at 9b28000 {
st_dwc3: dwc3 at 8f94000 {
- compatible = "st,stih407-dwc3";
- reg = <0x08f94000 0x1000>, <0x110 0x4>;
- reg-names = "reg-glue", "syscfg-reg";
- st,syscfg = <&syscfg_core>;
- resets = <&powerdown STIH407_USB3_POWERDOWN>,
- <&softreset STIH407_MIPHY2_SOFTRESET>;
- reset-names = "powerdown", "softreset";
- #address-cells = <1>;
- #size-cells = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usb3>;
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
ranges;
status = "disabled";
dwc3: dwc3 at 9900000 {
- compatible = "snps,dwc3";
- reg = <0x09900000 0x100000>;
- interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
- dr_mode = "host";
- phy-names = "usb2-phy", "usb3-phy";
- phys = <&usb2_picophy0>,
- <&phy_port2 PHY_TYPE_USB3>;
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
snps,dis_u3_susphy_quirk;
};
};
/* COMMS PWM Module */
pwm0: pwm at 9810000 {
- compatible = "st,sti-pwm";
- #pwm-cells = <2>;
- reg = <0x9810000 0x68>;
- interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
st,pwm-num-chan = <1>;
- status = "disabled";
+ status = "disabled";
};
/* SBC PWM Module */
pwm1: pwm at 9510000 {
- compatible = "st,sti-pwm";
- #pwm-cells = <2>;
- reg = <0x9510000 0x68>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_pwm1_chan0_default
- &pinctrl_pwm1_chan1_default
- &pinctrl_pwm1_chan2_default
- &pinctrl_pwm1_chan3_default>;
- clock-names = "pwm";
- clocks = <&clk_sysin>;
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
st,pwm-num-chan = <4>;
- status = "disabled";
+ status = "disabled";
};
rng10: rng at 8a89000 {
- compatible = "st,rng";
- reg = <0x08a89000 0x1000>;
- clocks = <&clk_sysin>;
- status = "okay";
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
};
rng11: rng at 8a8a000 {
- compatible = "st,rng";
- reg = <0x08a8a000 0x1000>;
- clocks = <&clk_sysin>;
- status = "okay";
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
};
ethernet0: dwmac at 9630000 {
@@ -812,36 +812,36 @@ ethernet0: dwmac at 9630000 {
};
mailbox0: mailbox at 8f00000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f00000 0x1000>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
- #mbox-cells = <2>;
- mbox-name = "a9";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f00000 0x1000>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ #mbox-cells = <2>;
+ mbox-name = "a9";
+ status = "okay";
};
mailbox1: mailbox at 8f01000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f01000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_gp_1";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f01000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_1";
+ status = "okay";
};
mailbox2: mailbox at 8f02000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f02000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_gp_0";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f02000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_gp_0";
+ status = "okay";
};
mailbox3: mailbox at 8f03000 {
- compatible = "st,stih407-mailbox";
- reg = <0x8f03000 0x1000>;
- #mbox-cells = <2>;
- mbox-name = "st231_audio_video";
- status = "okay";
+ compatible = "st,stih407-mailbox";
+ reg = <0x8f03000 0x1000>;
+ #mbox-cells = <2>;
+ mbox-name = "st231_audio_video";
+ status = "okay";
};
/* fdma audio */
@@ -913,7 +913,7 @@ sti_uni_player0: sti-uni-player at 8d80000 {
dmas = <&fdma0 2 0 1>;
dma-names = "tx";
- status = "disabled";
+ status = "disabled";
};
sti_uni_player1: sti-uni-player at 8d81000 {
diff --git a/arch/arm/boot/dts/stih407.dtsi b/arch/arm/boot/dts/stih407.dtsi
index 9e212b0af89d..aca43d2bdaad 100644
--- a/arch/arm/boot/dts/stih407.dtsi
+++ b/arch/arm/boot/dts/stih407.dtsi
@@ -13,7 +13,7 @@ sti-display-subsystem at 0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0>;
- assigned-clocks = <&clk_s_d2_quadfs 0>,
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -106,7 +106,7 @@ sti_hdmi: sti-hdmi at 8d04000 {
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irq";
+ interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
index ce2f62cf129b..a39dd5f7bcae 100644
--- a/arch/arm/boot/dts/stih410.dtsi
+++ b/arch/arm/boot/dts/stih410.dtsi
@@ -105,7 +105,7 @@ sti-display-subsystem at 0 {
#size-cells = <1>;
reg = <0 0>;
- assigned-clocks = <&clk_s_d2_quadfs 0>,
+ assigned-clocks = <&clk_s_d2_quadfs 0>,
<&clk_s_d2_quadfs 1>,
<&clk_s_c0_pll1 0>,
<&clk_s_c0_flexgen CLK_COMPO_DVP>,
@@ -198,7 +198,7 @@ sti_hdmi: sti-hdmi at 8d04000 {
reg-names = "hdmi-reg";
#sound-dai-cells = <0>;
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "irq";
+ interrupt-names = "irq";
clock-names = "pix",
"tmds",
"phy",
diff --git a/arch/arm/boot/dts/stihxxx-b2120.dtsi b/arch/arm/boot/dts/stihxxx-b2120.dtsi
index 4c72dedcd1be..2aa94605d3d4 100644
--- a/arch/arm/boot/dts/stihxxx-b2120.dtsi
+++ b/arch/arm/boot/dts/stihxxx-b2120.dtsi
@@ -175,11 +175,11 @@ demux at 8a20000 {
/* tsin0 is TSA on NIMA */
tsin0: port {
- tsin-num = <0>;
+ tsin-num = <0>;
serial-not-parallel;
- i2c-bus = <&ssc2>;
- reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
- dvb-card = <STV0367_TDA18212_NIMA_1>;
+ i2c-bus = <&ssc2>;
+ reset-gpios = <&pio15 4 GPIO_ACTIVE_HIGH>;
+ dvb-card = <STV0367_TDA18212_NIMA_1>;
};
};
--
2.34.1
More information about the linux-arm-kernel
mailing list