[PATCH v7 5/6] arm64: dts: mt8195: Add efuse node to mt8195

AngeloGioacchino Del Regno angelogioacchino.delregno at somainline.org
Thu May 26 07:42:52 PDT 2022


Il 24/05/22 17:25, Alexandre Bailon ha scritto:
> This adds the efuse node. This will be required by the thermal driver
> to get the calibration data.
> 
> Signed-off-by: Alexandre Bailon <abailon at baylibre.com>
> ---
>   arch/arm64/boot/dts/mediatek/mt8195.dtsi | 17 +++++++++++++++++
>   1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> index 0011a8ba8f96..51443e83d906 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
> @@ -1238,6 +1238,23 @@ nor_flash: spi at 1132c000 {
>   			status = "disabled";
>   		};
>   
> +		efuse: efuse at 11c10000 {
> +			compatible = "mediatek,efuse";
> +			reg = <0 0x11c10000 0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			lvts_e_data1: data1 {

lvts1-calib at 1bc

> +				reg = <0x1bc 0x14>;
> +			};
> +			lvts_e_data2: data1-1 {

lvts2-calib at 1d0

> +				reg = <0x1d0 0x38>;
> +			};
> +			svs_calibration: calib at 580 {
> +				reg = <0x580 0x64>;
> +			};
> +		};
> +
>   		u3phy2: t-phy at 11c40000 {
>   			compatible = "mediatek,mt8195-tphy", "mediatek,generic-tphy-v3";
>   			#address-cells = <1>;




More information about the linux-arm-kernel mailing list