[PATCH V2] dt-bindings: dma: fsl-edma: Convert to DT schema

[Krzysztof Kozlowski]

On 26/05/2022 12:24, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Convert the eDMA controller binding to DT schema.
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
> 
> V2:
>  Typo fix
>  Correct interrupts/interrupt-names/AllOf
> 
>  .../devicetree/bindings/dma/fsl,edma.yaml     | 140 ++++++++++++++++++
>  .../devicetree/bindings/dma/fsl-edma.txt      | 111 --------------
>  2 files changed, 140 insertions(+), 111 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/dma/fsl,edma.yaml
>  delete mode 100644 Documentation/devicetree/bindings/dma/fsl-edma.txt
> 
> diff --git a/Documentation/devicetree/bindings/dma/fsl,edma.yaml b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> new file mode 100644
> index 000000000000..0a63b0b70f98
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/dma/fsl,edma.yaml
> @@ -0,0 +1,140 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/dma/fsl,edma.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Freescale enhanced Direct Memory Access(eDMA) Controller
> +
> +description: |
> +  The eDMA channels have multiplex capability by programmable
> +  memory-mapped registers. channels are split into two groups, called
> +  DMAMUX0 and DMAMUX1, specific DMA request source can only be multiplexed
> +  by any channel of certain group, DMAMUX0 or DMAMUX1, but not both.
> +
> +maintainers:
> +  - Peng Fan <peng.fan at nxp.com>
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - enum:
> +          - fsl,vf610-edma
> +          - fsl,imx7ulp-edma
> +      - items:
> +          - const: fsl,ls1028a-edma
> +          - const: fsl,vf610-edma
> +

The reg and interrupts should still be there (matching the widest of
constraints).

> +  "#dma-cells":
> +    const: 2
> +
> +  dma-channels:
> +    const: 32
> +
> +  clocks:
> +    maxItems: 2

Also clock-names with maxItems:2

> +
> +  big-endian:
> +    description: |
> +      If present registers and hardware scatter/gather descriptors of the
> +      eDMA are implemented in big endian mode, otherwise in little mode.
> +    type: boolean
> +

Best regards,
Krzysztof