[PATCH v5 42/44] media: sun6i-csi: Add extra checks to the interrupt routine

Paul Kocialkowski paul.kocialkowski at bootlin.com
Wed May 25 12:06:15 PDT 2022


Check against the enabled bits and make sure capture is running before
serving an interrupt, to add extra safety in the process.

Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>
---
 drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
index eaf62cab0b64..46c5f98702e1 100644
--- a/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
+++ b/drivers/media/platform/sunxi/sun6i-csi/sun6i_csi.c
@@ -89,13 +89,17 @@ static void sun6i_csi_v4l2_cleanup(struct sun6i_csi_device *csi_dev)
 static irqreturn_t sun6i_csi_interrupt(int irq, void *private)
 {
 	struct sun6i_csi_device *csi_dev = private;
+	bool capture_streaming = csi_dev->capture.state.streaming;
 	struct regmap *regmap = csi_dev->regmap;
-	u32 status;
+	u32 status = 0, enable = 0;
 
 	regmap_read(regmap, SUN6I_CSI_CH_INT_STA_REG, &status);
+	regmap_read(regmap, SUN6I_CSI_CH_INT_EN_REG, &enable);
 
-	if (!(status & 0xFF))
+	if (!status)
 		return IRQ_NONE;
+	else if (!(status & enable) || !capture_streaming)
+		goto complete;
 
 	if ((status & SUN6I_CSI_CH_INT_STA_FIFO0_OF) ||
 	    (status & SUN6I_CSI_CH_INT_STA_FIFO1_OF) ||
@@ -116,6 +120,7 @@ static irqreturn_t sun6i_csi_interrupt(int irq, void *private)
 	if (status & SUN6I_CSI_CH_INT_STA_VS)
 		sun6i_csi_capture_sync(csi_dev);
 
+complete:
 	regmap_write(regmap, SUN6I_CSI_CH_INT_STA_REG, status);
 
 	return IRQ_HANDLED;
-- 
2.36.1




More information about the linux-arm-kernel mailing list