[PATCH] drm/sun4i: Fix blend registers corruption for DE2.0/DE3.0
Roman Stratiienko
r.stratiienko at gmail.com
Wed May 25 07:55:56 PDT 2022
вт, 24 мая 2022 г. в 22:14, Jernej Škrabec <jernej.skrabec at gmail.com>:
>
> Dne torek, 24. maj 2022 ob 19:14:35 CEST je Roman Stratiienko napisal(a):
> > By the way, not related to this issue:
> >
> > I cherry-picked
> > https://patchwork.kernel.org/project/dri-devel/patch/20220424162633.12369-9-samuel@sholland.org/
> > and got a blank FB console on OPI3.
> > Can you check it please?
>
> Reply to that patch and we'll talk.
Despite the fact that I am the original author of the patches I'm not
even in CC, so I can respond to this thread.
Is there any other way to respond to the message where you're not in CC?
>
> Best regards,
> Jernej
>
> >
> > Regards,
> > Roman
> >
> >
> >
> > вт, 24 мая 2022 г. в 20:10, Roman Stratiienko <r.stratiienko at gmail.com>:
> > >
> > > Please draft a test for the zpos issue you're mentioning.
> > >
> > > It's very easy to do with kmsxx using python wrapper.
> > >
> > > Or explain steps to reproduce here, I will write it by myself.
> > >
> > > Thanks.
> > > Regards
> > > Roman
> > >
> > > вт, 24 мая 2022 г. в 19:21, Jernej Škrabec <jernej.skrabec at gmail.com>:
> > > >
> > > > Dne torek, 24. maj 2022 ob 17:31:13 CEST je Roman Stratiienko
> napisal(a):
> > > > > NAK for this. Further testing showed such an approach is not reliable
> > > > > due to .atomic_update() callback called only in case planes have some
> > > > > changes.
> > > >
> > > > Additionally, I think it would be better to fix underlaying zpos issue
> first
> > > > (attempted many times) and then worry about blending.
> > > >
> > > > Best regards,
> > > > Jernej
> > > >
> > > > >
> > > > > вт, 24 мая 2022 г. в 16:52, Roman Stratiienko
> <r.stratiienko at gmail.com>:
> > > > > >
> > > > > > Corruption happens when plane zpos is updated
> > > > > >
> > > > > > Example scenario:
> > > > > >
> > > > > > Initial frame blender state:
> > > > > > PLANE_ZPOS = {0, 1, 2, 3}
> > > > > > BLD_ROUTE = {0, 1, 2, 0}
> > > > > > BLD_EN = {1, 1, 1, 0}
> > > > > >
> > > > > > New frame commit (Only ZPOS has been changed):
> > > > > >
> > > > > > PLANE_ZPOS = {0->2, 1->0, 2->1, 3}
> > > > > >
> > > > > > Expected results after plane state update:
> > > > > > Z0 Z1 Z2 Z3
> > > > > > BLD_ROUTE = {1, 2, 0, 0}
> > > > > > BLD_EN = {1, 1, 1, 0}
> > > > > >
> > > > > > What is currently happening:
> > > > > >
> > > > > > 1. sun8i_vi_layer_enable(enabled=true, zpos=2, old_zpos=0):
> > > > > > BLD_ROUTE = {1->0, 1, 2->0, 0}
> > > > > > BLD_EN = {1->0, 1, 1->1, 0}
> > > > > >
> > > > > > 2. sun8i_ui_layer_enable(enabled=true, zpos=0, old_zpos=1):
> > > > > > BLD_ROUTE = {0->1, 1->0, 0, 0}
> > > > > > BLD_EN = {0->1, 1->0, 1, 0}
> > > > > >
> > > > > > 3. sun8i_ui_layer_enable(enabled=true, zpos=1, old_zpos=2):
> > > > > > BLD_ROUTE = {1, 0->2, 0->0, 0}
> > > > > > BLD_EN = {1, 0->2, 1->0, 0}
> > > > > >
> > > > > > After updating of all the planes we are ending up with BLD_EN[2]=0,
> > > > > > which makes this channel disabled.
> > > > > >
> > > > > > To fix this issue, clear BLEND registers before updating the planes
> > > > > > and do not clear the old state while processing every plane.
> > > > > >
> > > > > > Signed-off-by: Roman Stratiienko
> <roman.o.stratiienko at globallogic.com>
> > > > > > ---
> > > > > > drivers/gpu/drm/sun4i/sun8i_mixer.c | 16 +++++++++++++++
> > > > > > drivers/gpu/drm/sun4i/sun8i_ui_layer.c | 28 +++
> +----------------------
> > > > > > drivers/gpu/drm/sun4i/sun8i_vi_layer.c | 28 +++
> +----------------------
> > > > > > 3 files changed, 24 insertions(+), 48 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_mixer.c b/drivers/gpu/drm/
> sun4i/
> > > > sun8i_mixer.c
> > > > > > index f5e8aeaa3cdf..004377a000fc 100644
> > > > > > --- a/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_mixer.c
> > > > > > @@ -248,6 +248,21 @@ int sun8i_mixer_drm_format_to_hw(u32 format,
> u32
> > > > *hw_format)
> > > > > > return -EINVAL;
> > > > > > }
> > > > > >
> > > > > > +static void sun8i_atomic_begin(struct sunxi_engine *engine,
> > > > > > + struct drm_crtc_state *old_state)
> > > > > > +{
> > > > > > + struct sun8i_mixer *mixer = engine_to_sun8i_mixer(engine);
> > > > > > + u32 bld_base = sun8i_blender_base(mixer);
> > > > > > +
> > > > > > + regmap_write(engine->regs,
> > > > > > + SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > > > + 0);
> > > > > > +
> > > > > > + regmap_write(engine->regs,
> > > > > > + SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > > > + 0);
> > > > > > +}
> > > > > > +
> > > > > > static void sun8i_mixer_commit(struct sunxi_engine *engine)
> > > > > > {
> > > > > > DRM_DEBUG_DRIVER("Committing changes\n");
> > > > > > @@ -299,6 +314,7 @@ static struct drm_plane
> **sun8i_layers_init(struct
> > > > drm_device *drm,
> > > > > > }
> > > > > >
> > > > > > static const struct sunxi_engine_ops sun8i_engine_ops = {
> > > > > > + .atomic_begin = sun8i_atomic_begin,
> > > > > > .commit = sun8i_mixer_commit,
> > > > > > .layers_init = sun8i_layers_init,
> > > > > > };
> > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c b/drivers/gpu/
> drm/
> > > > sun4i/sun8i_ui_layer.c
> > > > > > index 7845c2a53a7f..b294a882626a 100644
> > > > > > --- a/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_ui_layer.c
> > > > > > @@ -24,8 +24,7 @@
> > > > > > #include "sun8i_ui_scaler.h"
> > > > > >
> > > > > > static void sun8i_ui_layer_enable(struct sun8i_mixer *mixer, int
> channel,
> > > > > > - int overlay, bool enable, unsigned
> int
> > > > zpos,
> > > > > > - unsigned int old_zpos)
> > > > > > + int overlay, bool enable, unsigned
> int
> > > > zpos)
> > > > > > {
> > > > > > u32 val, bld_base, ch_base;
> > > > > >
> > > > > > @@ -44,18 +43,6 @@ static void sun8i_ui_layer_enable(struct
> sun8i_mixer
> > > > *mixer, int channel,
> > > > > > SUN8I_MIXER_CHAN_UI_LAYER_ATTR(ch_base,
> > > > overlay),
> > > > > > SUN8I_MIXER_CHAN_UI_LAYER_ATTR_EN, val);
> > > > > >
> > > > > > - if (!enable || zpos != old_zpos) {
> > > > > > - regmap_update_bits(mixer->engine.regs,
> > > > > > -
> SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > > > -
> > > > SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > > > > - 0);
> > > > > > -
> > > > > > - regmap_update_bits(mixer->engine.regs,
> > > > > > -
> SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > > > -
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > > > > - 0);
> > > > > > - }
> > > > > > -
> > > > > > if (enable) {
> > > > > > val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > > > > >
> > > > > > @@ -291,31 +278,24 @@ static int sun8i_ui_layer_atomic_check(struct
> > > > drm_plane *plane,
> > > > > > static void sun8i_ui_layer_atomic_disable(struct drm_plane *plane,
> > > > > > struct drm_atomic_state
> *state)
> > > > > > {
> > > > > > - struct drm_plane_state *old_state =
> > > > drm_atomic_get_old_plane_state(state,
> > > > > > -
> > > > plane);
> > > > > > struct sun8i_ui_layer *layer =
> plane_to_sun8i_ui_layer(plane);
> > > > > > - unsigned int old_zpos = old_state->normalized_zpos;
> > > > > > struct sun8i_mixer *mixer = layer->mixer;
> > > > > >
> > > > > > - sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > false, 0,
> > > > > > - old_zpos);
> > > > > > + sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > false, 0);
> > > > > > }
> > > > > >
> > > > > > static void sun8i_ui_layer_atomic_update(struct drm_plane *plane,
> > > > > > struct drm_atomic_state
> *state)
> > > > > > {
> > > > > > - struct drm_plane_state *old_state =
> > > > drm_atomic_get_old_plane_state(state,
> > > > > > -
> > > > plane);
> > > > > > struct drm_plane_state *new_state =
> > > > drm_atomic_get_new_plane_state(state,
> > > > > >
> > > > plane);
> > > > > > struct sun8i_ui_layer *layer =
> plane_to_sun8i_ui_layer(plane);
> > > > > > unsigned int zpos = new_state->normalized_zpos;
> > > > > > - unsigned int old_zpos = old_state->normalized_zpos;
> > > > > > struct sun8i_mixer *mixer = layer->mixer;
> > > > > >
> > > > > > if (!new_state->visible) {
> > > > > > sun8i_ui_layer_enable(mixer, layer->channel,
> > > > > > - layer->overlay, false, 0,
> old_zpos);
> > > > > > + layer->overlay, false, 0);
> > > > > > return;
> > > > > > }
> > > > > >
> > > > > > @@ -328,7 +308,7 @@ static void sun8i_ui_layer_atomic_update(struct
> > > > drm_plane *plane,
> > > > > > sun8i_ui_layer_update_buffer(mixer, layer->channel,
> > > > > > layer->overlay, plane);
> > > > > > sun8i_ui_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > > - true, zpos, old_zpos);
> > > > > > + true, zpos);
> > > > > > }
> > > > > >
> > > > > > static const struct drm_plane_helper_funcs
> sun8i_ui_layer_helper_funcs =
> > > > {
> > > > > > diff --git a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c b/drivers/gpu/
> drm/
> > > > sun4i/sun8i_vi_layer.c
> > > > > > index bb7c43036dfa..4653244b2fd8 100644
> > > > > > --- a/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > > > > +++ b/drivers/gpu/drm/sun4i/sun8i_vi_layer.c
> > > > > > @@ -18,8 +18,7 @@
> > > > > > #include "sun8i_vi_scaler.h"
> > > > > >
> > > > > > static void sun8i_vi_layer_enable(struct sun8i_mixer *mixer, int
> channel,
> > > > > > - int overlay, bool enable, unsigned
> int
> > > > zpos,
> > > > > > - unsigned int old_zpos)
> > > > > > + int overlay, bool enable, unsigned
> int
> > > > zpos)
> > > > > > {
> > > > > > u32 val, bld_base, ch_base;
> > > > > >
> > > > > > @@ -38,18 +37,6 @@ static void sun8i_vi_layer_enable(struct
> sun8i_mixer
> > > > *mixer, int channel,
> > > > > > SUN8I_MIXER_CHAN_VI_LAYER_ATTR(ch_base,
> > > > overlay),
> > > > > > SUN8I_MIXER_CHAN_VI_LAYER_ATTR_EN, val);
> > > > > >
> > > > > > - if (!enable || zpos != old_zpos) {
> > > > > > - regmap_update_bits(mixer->engine.regs,
> > > > > > -
> SUN8I_MIXER_BLEND_PIPE_CTL(bld_base),
> > > > > > -
> > > > SUN8I_MIXER_BLEND_PIPE_CTL_EN(old_zpos),
> > > > > > - 0);
> > > > > > -
> > > > > > - regmap_update_bits(mixer->engine.regs,
> > > > > > -
> SUN8I_MIXER_BLEND_ROUTE(bld_base),
> > > > > > -
> > > > SUN8I_MIXER_BLEND_ROUTE_PIPE_MSK(old_zpos),
> > > > > > - 0);
> > > > > > - }
> > > > > > -
> > > > > > if (enable) {
> > > > > > val = SUN8I_MIXER_BLEND_PIPE_CTL_EN(zpos);
> > > > > >
> > > > > > @@ -395,31 +382,24 @@ static int sun8i_vi_layer_atomic_check(struct
> > > > drm_plane *plane,
> > > > > > static void sun8i_vi_layer_atomic_disable(struct drm_plane *plane,
> > > > > > struct drm_atomic_state
> *state)
> > > > > > {
> > > > > > - struct drm_plane_state *old_state =
> > > > drm_atomic_get_old_plane_state(state,
> > > > > > -
> > > > plane);
> > > > > > struct sun8i_vi_layer *layer =
> plane_to_sun8i_vi_layer(plane);
> > > > > > - unsigned int old_zpos = old_state->normalized_zpos;
> > > > > > struct sun8i_mixer *mixer = layer->mixer;
> > > > > >
> > > > > > - sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > false, 0,
> > > > > > - old_zpos);
> > > > > > + sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > false, 0);
> > > > > > }
> > > > > >
> > > > > > static void sun8i_vi_layer_atomic_update(struct drm_plane *plane,
> > > > > > struct drm_atomic_state
> *state)
> > > > > > {
> > > > > > - struct drm_plane_state *old_state =
> > > > drm_atomic_get_old_plane_state(state,
> > > > > > -
> > > > plane);
> > > > > > struct drm_plane_state *new_state =
> > > > drm_atomic_get_new_plane_state(state,
> > > > > >
> > > > plane);
> > > > > > struct sun8i_vi_layer *layer =
> plane_to_sun8i_vi_layer(plane);
> > > > > > unsigned int zpos = new_state->normalized_zpos;
> > > > > > - unsigned int old_zpos = old_state->normalized_zpos;
> > > > > > struct sun8i_mixer *mixer = layer->mixer;
> > > > > >
> > > > > > if (!new_state->visible) {
> > > > > > sun8i_vi_layer_enable(mixer, layer->channel,
> > > > > > - layer->overlay, false, 0,
> old_zpos);
> > > > > > + layer->overlay, false, 0);
> > > > > > return;
> > > > > > }
> > > > > >
> > > > > > @@ -432,7 +412,7 @@ static void sun8i_vi_layer_atomic_update(struct
> > > > drm_plane *plane,
> > > > > > sun8i_vi_layer_update_buffer(mixer, layer->channel,
> > > > > > layer->overlay, plane);
> > > > > > sun8i_vi_layer_enable(mixer, layer->channel, layer->overlay,
> > > > > > - true, zpos, old_zpos);
> > > > > > + true, zpos);
> > > > > > }
> > > > > >
> > > > > > static const struct drm_plane_helper_funcs
> sun8i_vi_layer_helper_funcs =
> > > > {
> > > > > > --
> > > > > > 2.30.2
> > > > > >
> > > > >
> > > >
> > > >
> >
>
>
More information about the linux-arm-kernel
mailing list