[PATCH v10 14/21] drm/mediatek: dpi: Add dpintf support

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Wed May 25 05:58:53 PDT 2022


Il 23/05/22 12:47, Guillaume Ranquet ha scritto:
> dpintf is the displayport interface hardware unit. This unit is similar
> to dpi and can reuse most of the code.
> 
> This patch adds support for mt8195-dpintf to this dpi driver. Main
> differences are:
>   - Some features/functional components are not available for dpintf
>     which are now excluded from code execution once is_dpintf is set
>   - dpintf can and needs to choose between different clockdividers based
>     on the clockspeed. This is done by choosing a different clock parent.
>   - There are two additional clocks that need to be managed. These are
>     only set for dpintf and will be set to NULL if not supplied. The
>     clk_* calls handle these as normal clocks then.
>   - Some register contents differ slightly between the two components. To
>     work around this I added register bits/masks with a DPINTF_ prefix
>     and use them where different.
> 
> Based on a separate driver for dpintf created by
> Jason-JH.Lin <jason-jh.lin at mediatek.com>.
> 

Only after finishing the review, I've noticed that I just wrote the same things
that I wrote in my review for version 8... and if I recall correctly, this is not
the first time that something like that happens.

Please pay attention to what reviewers say, as to not waste anyone's time.


> Signed-off-by: Markus Schneider-Pargmann <msp at baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> ---
>   drivers/gpu/drm/mediatek/mtk_dpi.c          | 126 +++++++++++++++++---
>   drivers/gpu/drm/mediatek/mtk_dpi_regs.h     |  35 ++++++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c |   8 ++
>   drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h |   1 +
>   drivers/gpu/drm/mediatek/mtk_drm_drv.c      |   5 +-
>   include/linux/soc/mediatek/mtk-mmsys.h      |   4 +-
>   6 files changed, 159 insertions(+), 20 deletions(-)
> 
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index eb969c5c5c2e..763bfb700135 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -71,6 +71,7 @@ struct mtk_dpi {
>   	void __iomem *regs;
>   	struct device *dev;
>   	struct clk *engine_clk;
> +	struct clk *dpi_ck_cg;
>   	struct clk *pixel_clk;
>   	struct clk *tvd_clk;
>   	int irq;
> @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
>   	const u32 *output_fmts;
>   	u32 num_output_fmts;
>   	bool is_ck_de_pol;
> +	bool is_dpintf;
>   	bool swap_input_support;
>   	/* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH (no shift) */
>   	u32 dimension_mask;
> @@ -438,6 +440,8 @@ static void mtk_dpi_power_off(struct mtk_dpi *dpi)
>   	mtk_dpi_disable(dpi);
>   	clk_disable_unprepare(dpi->pixel_clk);
>   	clk_disable_unprepare(dpi->engine_clk);
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +	clk_disable_unprepare(dpi->tvd_clk);
>   }
>   
>   static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> @@ -447,12 +451,24 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	if (++dpi->refcount != 1)
>   		return 0;
>   
> +	ret = clk_prepare_enable(dpi->tvd_clk);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable tvd pll: %d\n", ret);
> +		goto err_pixel;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->engine_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable engine clock: %d\n", ret);
>   		goto err_refcount;
>   	}
>   
> +	ret = clk_prepare_enable(dpi->dpi_ck_cg);
> +	if (ret) {
> +		dev_err(dpi->dev, "Failed to enable dpi_ck_cg clock: %d\n", ret);
> +		goto err_ck_cg;
> +	}
> +
>   	ret = clk_prepare_enable(dpi->pixel_clk);
>   	if (ret) {
>   		dev_err(dpi->dev, "Failed to enable pixel clock: %d\n", ret);
> @@ -466,6 +482,8 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
>   	return 0;
>   
>   err_pixel:
> +	clk_disable_unprepare(dpi->dpi_ck_cg);
> +err_ck_cg:
>   	clk_disable_unprepare(dpi->engine_clk);
>   err_refcount:
>   	dpi->refcount--;
> @@ -498,11 +516,11 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   
>   	vm.pixelclock = pll_rate / factor;
>   	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
> -	    (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
> +		 (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {

The indentation was perfect before that change...

>   		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
> -	else
> +	} else {
>   		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
> -
> +	}
>   
>   	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
>   
> @@ -515,9 +533,15 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
>   	dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
>   			    MTK_DPI_POLARITY_FALLING : MTK_DPI_POLARITY_RISING;
> -	hsync.sync_width = vm.hsync_len;
> -	hsync.back_porch = vm.hback_porch;
> -	hsync.front_porch = vm.hfront_porch;
> +	if (dpi->conf->is_dpintf) {
> +		hsync.sync_width = vm.hsync_len / 4;
> +		hsync.back_porch = vm.hback_porch / 4;
> +		hsync.front_porch = vm.hfront_porch / 4;
> +	} else {
> +		hsync.sync_width = vm.hsync_len;
> +		hsync.back_porch = vm.hback_porch;
> +		hsync.front_porch = vm.hfront_porch;
> +	}

This looks way better:

	hsync.sync_width = vm.hsync_len;
	hsync.back_porch = vm.hback_porch;
	hsync.front_porch = vm.hfront_porch;

	/* For DPINTF, we need to divide everything by 4 .. lanes? */
	if (dpi->conf->is_dpintf) {
		hsync.sync_width /= 4;
		hsync.back_porch /= 4;
		hsync.front_porch /= 4;
	}

>   	hsync.shift_half_line = false;
>   	vsync_lodd.sync_width = vm.vsync_len;
>   	vsync_lodd.back_porch = vm.vback_porch;
> @@ -559,13 +583,20 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
>   	mtk_dpi_config_channel_limit(dpi);
>   	mtk_dpi_config_bit_num(dpi, dpi->bit_num);
>   	mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
> -	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
>   	mtk_dpi_config_color_format(dpi, dpi->color_format);
> -	mtk_dpi_config_2n_h_fre(dpi);
> -	mtk_dpi_dual_edge(dpi);
> -	mtk_dpi_config_disable_edge(dpi);
> +	if (dpi->conf->is_dpintf) {
> +		mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
> +			     DPINTF_INPUT_2P_EN);
> +	} else {
> +		mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> +		mtk_dpi_config_2n_h_fre(dpi);
> +		mtk_dpi_dual_edge(dpi);
> +		mtk_dpi_config_disable_edge(dpi);
> +	}
>   	mtk_dpi_sw_reset(dpi, false);
>   
> +	mtk_dpi_enable(dpi);
> +
>   	return 0;
>   }
>   
> @@ -608,7 +639,6 @@ static u32 *mtk_dpi_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
>   	u32 *input_fmts;
>   
>   	*num_input_fmts = 0;
> -

Removing this line is not part of adding dpintf support, so don't do that.

>   	input_fmts = kcalloc(1, sizeof(*input_fmts),
>   			     GFP_KERNEL);
>   	if (!input_fmts)
> @@ -634,15 +664,18 @@ static int mtk_dpi_bridge_atomic_check(struct drm_bridge *bridge,
>   		if (dpi->conf->num_output_fmts)
>   			out_bus_format = dpi->conf->output_fmts[0];
>   
> -	dev_dbg(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> -		bridge_state->input_bus_cfg.format,
> -		bridge_state->output_bus_cfg.format);
> +	dev_info(dpi->dev, "input format 0x%04x, output format 0x%04x\n",
> +		 bridge_state->input_bus_cfg.format,
> +		 bridge_state->output_bus_cfg.format);

This message is not giving any constantly changing information, nor any one that
is interesting for the user: keep this as dev_dbg().

>   
>   	dpi->output_fmt = out_bus_format;
>   	dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
>   	dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
>   	dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> -	dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> +	if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> +		dpi->color_format = MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;
> +	else
> +		dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
>   
>   	return 0;
>   }
> @@ -687,7 +720,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge *bridge,
>   {
>   	struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>   
> -	if (mode->clock > dpi->conf->max_clock_khz)
> +	if (dpi->conf->max_clock_khz && mode->clock > dpi->conf->max_clock_khz)
>   		return MODE_CLOCK_HIGH;
>   
>   	return MODE_OK;
> @@ -801,6 +834,16 @@ static unsigned int mt8183_calculate_factor(int clock)
>   		return 2;
>   }
>   
> +static unsigned int mt8195_dpintf_calculate_factor(int clock)
> +{
> +	if (clock < 70000)

is 70000 intentional? Or did you mean 700000?

> +		return 4;
> +	else if (clock < 200000)
> +		return 2;
> +	else
> +		return 1;
> +}
> +
>   static const u32 mt8173_output_fmts[] = {
>   	MEDIA_BUS_FMT_RGB888_1X24,
>   };
> @@ -810,6 +853,12 @@ static const u32 mt8183_output_fmts[] = {
>   	MEDIA_BUS_FMT_RGB888_2X12_BE,
>   };
>   
> +static const u32 mt8195_output_fmts[] = {
> +	MEDIA_BUS_FMT_RGB888_1X24,
> +	MEDIA_BUS_FMT_YUV8_1X24,
> +	MEDIA_BUS_FMT_YUYV8_1X16,
> +};
> +
>   static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
>   	.c_bottom = 0x0010,
>   	.c_top = 0x0FE0,
> @@ -817,6 +866,13 @@ static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
>   	.y_top = 0x0FE0,
>   };
>   
> +static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
> +	.c_bottom = 0x0000,
> +	.c_top = 0xFFF,
> +	.y_bottom = 0x0000,
> +	.y_top = 0xFFF,
> +};
> +
>   static const struct mtk_dpi_conf mt8173_conf = {
>   	.cal_factor = mt8173_calculate_factor,
>   	.reg_h_fre_con = 0xe0,
> @@ -882,6 +938,19 @@ static const struct mtk_dpi_conf mt8192_conf = {
>   	.limit = &mtk_dpi_limit,
>   };
>   
> +static const struct mtk_dpi_conf mt8195_dpintf_conf = {
> +	.cal_factor = mt8195_dpintf_calculate_factor,
> +	.output_fmts = mt8195_output_fmts,
> +	.num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
> +	.is_dpintf = true,
> +	.dimension_mask = DPINTF_HPW_MASK,
> +	.hvsize_mask = DPINTF_HSIZE_MASK,
> +	.channel_swap_shift = DPINTF_CH_SWAP,
> +	.yuv422_en_bit = DPINTF_YUV422_EN,
> +	.csc_enable_bit = DPINTF_CSC_ENABLE,
> +	.limit = &mtk_dpintf_limit,
> +};
> +
>   static int mtk_dpi_probe(struct platform_device *pdev)
>   {
>   	struct device *dev = &pdev->dev;
> @@ -929,7 +998,27 @@ static int mtk_dpi_probe(struct platform_device *pdev)
>   	if (IS_ERR(dpi->engine_clk)) {
>   		ret = PTR_ERR(dpi->engine_clk);
>   		if (ret != -EPROBE_DEFER)
> -			dev_err(dev, "Failed to get engine clock: %d\n", ret);
> +			dev_err(dev, "Failed to get engine clock: %d\n",
> +				ret);

Why are you breaking this line?

> +
> +		return ret;
> +	}
> +
> +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> +	if (IS_ERR(dpi->dpi_ck_cg)) {
> +		ret = PTR_ERR(dpi->dpi_ck_cg);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get dpi ck cg clock: %d\n",
> +				ret);
> +
> +		return ret;
> +	}
> +

You're getting this clock twice, what happened here?

P.S.: As I explained on the dt-bindings patch, you likely don't even need this
       clock at all.

> +	dpi->dpi_ck_cg = devm_clk_get_optional(dev, "ck_cg");
> +	if (IS_ERR(dpi->dpi_ck_cg)) {
> +		ret = PTR_ERR(dpi->dpi_ck_cg);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(dev, "Failed to get dpi ck cg clock: %d\n", ret);
>   
>   		return ret;
>   	}
> @@ -1004,6 +1093,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
>   	{ .compatible = "mediatek,mt8192-dpi",
>   	  .data = &mt8192_conf,
>   	},
> +	{ .compatible = "mediatek,mt8195-dpintf",
> +	  .data = &mt8195_dpintf_conf,
> +	},
>   	{ },
>   };
>   MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 3a02fabe1662..dd47dd3f2e4f 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -40,10 +40,15 @@
>   #define FAKE_DE_LEVEN			BIT(21)
>   #define FAKE_DE_RODD			BIT(22)
>   #define FAKE_DE_REVEN			BIT(23)
> +#define DPINTF_YUV422_EN		BIT(24)
> +#define DPINTF_CSC_ENABLE		BIT(26)
> +#define DPINTF_INPUT_2P_EN		BIT(29)
>   
>   #define DPI_OUTPUT_SETTING	0x14
>   #define CH_SWAP				0
> +#define DPINTF_CH_SWAP			BIT(1)
>   #define CH_SWAP_MASK			(0x7 << 0)
> +#define DPINTF_CH_SWAP_MASK		(0x7 << 1)
>   #define SWAP_RGB			0x00
>   #define SWAP_GBR			0x01
>   #define SWAP_BRG			0x02
> @@ -80,8 +85,10 @@
>   #define DPI_SIZE		0x18
>   #define HSIZE				0
>   #define HSIZE_MASK			(0x1FFF << 0)
> +#define DPINTF_HSIZE_MASK		(0xFFFF << 0)
>   #define VSIZE				16
>   #define VSIZE_MASK			(0x1FFF << 16)
> +#define DPINTF_VSIZE_MASK		(0xFFFF << 16)
>   
>   #define DPI_DDR_SETTING		0x1C
>   #define DDR_EN				BIT(0)
> @@ -93,24 +100,30 @@
>   #define DPI_TGEN_HWIDTH		0x20
>   #define HPW				0
>   #define HPW_MASK			(0xFFF << 0)
> +#define DPINTF_HPW_MASK			(0xFFFF << 0)
>   
>   #define DPI_TGEN_HPORCH		0x24
>   #define HBP				0
>   #define HBP_MASK			(0xFFF << 0)
> +#define DPINTF_HBP_MASK			(0xFFFF << 0)
>   #define HFP				16
>   #define HFP_MASK			(0xFFF << 16)
> +#define DPINTF_HFP_MASK			(0xFFFF << 16)
>   
>   #define DPI_TGEN_VWIDTH		0x28
>   #define DPI_TGEN_VPORCH		0x2C
>   
>   #define VSYNC_WIDTH_SHIFT		0
>   #define VSYNC_WIDTH_MASK		(0xFFF << 0)
> +#define DPINTF_VSYNC_WIDTH_MASK		(0xFFFF << 0)
>   #define VSYNC_HALF_LINE_SHIFT		16
>   #define VSYNC_HALF_LINE_MASK		BIT(16)
>   #define VSYNC_BACK_PORCH_SHIFT		0
>   #define VSYNC_BACK_PORCH_MASK		(0xFFF << 0)
> +#define DPINTF_VSYNC_BACK_PORCH_MASK	(0xFFFF << 0)
>   #define VSYNC_FRONT_PORCH_SHIFT		16
>   #define VSYNC_FRONT_PORCH_MASK		(0xFFF << 16)
> +#define DPINTF_VSYNC_FRONT_PORCH_MASK	(0xFFFF << 16)
>   
>   #define DPI_BG_HCNTL		0x30
>   #define BG_RIGHT			(0x1FFF << 0)
> @@ -217,4 +230,26 @@
>   
>   #define EDGE_SEL_EN			BIT(5)
>   #define H_FRE_2N			BIT(25)
> +
> +#define RGB_TO_JPEG			0x00

This is 0x0

> +#define RGB_TO_FULL709			0x01

0x1

> +#define RGB_TO_BT601			0x02

0x2

...remove the unnecessary leading zeros, but... you're not ever
using this set of definitions, so why are you even adding them?

> +#define RGB_TO_BT709			0x03
> +#define JPEG_TO_RGB			0x04
> +#define FULL709_TO_RGB			0x05
> +#define BT601_TO_RGB			0x06
> +#define BT709_TO_RGB			0x07
> +#define JPEG_TO_BT601			0x08
> +#define JPEG_TO_BT709			0x09
> +#define BT601_TO_JPEG			0xA
> +#define BT709_TO_JPEG			0xB
> +#define BT709_TO_BT601			0xC
> +#define BT601_TO_BT709			0xD
> +#define JPEG_TO_CERGB			0x14
> +#define FULL709_TO_CERGB		0x15
> +#define BT601_TO_CERGB			0x16
> +#define BT709_TO_CERGB			0x17
> +#define RGB_TO_CERGB			0x1C
> +#define MATRIX_BIT			BIT(8)
> +#define EXT_MATRIX_EN			BIT(12)
>   #endif /* __MTK_DPI_REGS_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 245d0074e12d..3738665a712e 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -419,6 +419,11 @@ static const char * const mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
>   	[MTK_DISP_WDMA] = "wdma",
>   	[MTK_DPI] = "dpi",
>   	[MTK_DSI] = "dsi",
> +	[MTK_DP_INTF] = "dp-intf",
> +	[MTK_DISP_PWM] = "pwm",
> +	[MTK_DISP_MUTEX] = "mutex",
> +	[MTK_DISP_OD] = "od",
> +	[MTK_DISP_BLS] = "bls",

Please keep alphabetic order.

>   };
>   
>   struct mtk_ddp_comp_match {
> @@ -439,6 +444,8 @@ static const struct mtk_ddp_comp_match mtk_ddp_matches[DDP_COMPONENT_ID_MAX] = {
>   	[DDP_COMPONENT_DPI1]		= { MTK_DPI,			1, &ddp_dpi },
>   	[DDP_COMPONENT_DSC0]		= { MTK_DISP_DSC,		0, &ddp_dsc },
>   	[DDP_COMPONENT_DSC1]		= { MTK_DISP_DSC,		1, &ddp_dsc },
> +	[DDP_COMPONENT_DP_INTF0]	= { MTK_DP_INTF,	0, &ddp_dpi },
> +	[DDP_COMPONENT_DP_INTF1]	= { MTK_DP_INTF,	1, &ddp_dpi },

Indentation issue. Fix it.

>   	[DDP_COMPONENT_DSI0]		= { MTK_DSI,			0, &ddp_dsi },
>   	[DDP_COMPONENT_DSI1]		= { MTK_DSI,			1, &ddp_dsi },
>   	[DDP_COMPONENT_DSI2]		= { MTK_DSI,			2, &ddp_dsi },
> @@ -565,6 +572,7 @@ int mtk_ddp_comp_init(struct device_node *node, struct mtk_ddp_comp *comp,
>   	    type == MTK_DISP_PWM ||
>   	    type == MTK_DISP_RDMA ||
>   	    type == MTK_DPI ||
> +	    type == MTK_DP_INTF ||
>   	    type == MTK_DSI)
>   		return 0;
>   
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index 825d763d2378..c4e683f46a95 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -37,6 +37,7 @@ enum mtk_ddp_comp_type {
>   	MTK_DISP_UFOE,
>   	MTK_DISP_WDMA,
>   	MTK_DPI,
> +	MTK_DP_INTF,
>   	MTK_DSI,
>   	MTK_DDP_COMP_TYPE_MAX,
>   };
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index a2a783fc580e..e25ac61aac08 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -690,6 +690,8 @@ static const struct of_device_id mtk_ddp_comp_dt_ids[] = {
>   	  .data = (void *)MTK_DPI },
>   	{ .compatible = "mediatek,mt8183-dpi",
>   	  .data = (void *)MTK_DPI },
> +	{ .compatible = "mediatek,mt8195-dpintf",
> +	  .data = (void *)MTK_DP_INTF },
>   	{ .compatible = "mediatek,mt2701-dsi",
>   	  .data = (void *)MTK_DSI },
>   	{ .compatible = "mediatek,mt8173-dsi",
> @@ -801,8 +803,9 @@ static int mtk_drm_probe(struct platform_device *pdev)
>   		    comp_type == MTK_DISP_OVL_2L ||
>   		    comp_type == MTK_DISP_OVL_ADAPTOR ||
>   		    comp_type == MTK_DISP_RDMA ||
> +		    comp_type == MTK_DSI ||
>   		    comp_type == MTK_DPI ||
> -		    comp_type == MTK_DSI) {
> +		    comp_type == MTK_DP_INTF) {

These were nice and alphabetically ordered, why are you moving MTK_DSI up there?!

  		    comp_type == MTK_DISP_RDMA ||
		    comp_type == MTK_DP_INTF ||
  		    comp_type == MTK_DPI ||
		    comp_type == MTK_DSI) {

... that's how it should look like.

>   			dev_info(dev, "Adding component match for %pOF\n",
>   				 node);
>   			drm_of_component_match_add(dev, &match, component_compare_of,
> diff --git a/include/linux/soc/mediatek/mtk-mmsys.h b/include/linux/soc/mediatek/mtk-mmsys.h
> index 3e998bfb795a..e4b84c347201 100644
> --- a/include/linux/soc/mediatek/mtk-mmsys.h
> +++ b/include/linux/soc/mediatek/mtk-mmsys.h
> @@ -21,12 +21,12 @@ enum mtk_ddp_comp_id {
>   	DDP_COMPONENT_COLOR0,
>   	DDP_COMPONENT_COLOR1,
>   	DDP_COMPONENT_DITHER,
> -	DDP_COMPONENT_DP_INTF0,
> -	DDP_COMPONENT_DP_INTF1,
>   	DDP_COMPONENT_DPI0,
>   	DDP_COMPONENT_DPI1,
>   	DDP_COMPONENT_DSC0,
>   	DDP_COMPONENT_DSC1,
> +	DDP_COMPONENT_DP_INTF0,
> +	DDP_COMPONENT_DP_INTF1,

Why are you moving this?!

>   	DDP_COMPONENT_DSI0,
>   	DDP_COMPONENT_DSI1,
>   	DDP_COMPONENT_DSI2,





More information about the linux-arm-kernel mailing list