[EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio

[Joy Zou]

> -----Original Message-----
> From: Vinod Koul <vkoul at kernel.org>
> Sent: 2021年10月25日 12:45
> To: Joy Zou <joy.zou at nxp.com>
> Cc: Robin Gong <yibin.gong at nxp.com>; shawnguo at kernel.org;
> s.hauer at pengutronix.de; kernel at pengutronix.de; festevam at gmail.com;
> dl-linux-imx <linux-imx at nxp.com>; dmaengine at vger.kernel.org;
> linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org
> Subject: [EXT] Re: [PATCH 2/2] dmaengine: imx-sdma: support hdmi audio
> 
> 
> On 21-10-21, 13:16, Joy Zou wrote:
> > Add hdmi audio support in sdma.
> 
> Pls send a series together and chained. They appear here as disjoint patches
> 

 The audio and dma patches always are separate. The audio driver owner can send audio patches after the dma patches are accepted.
> >
> > Signed-off-by: Joy Zou <joy.zou at nxp.com>
> > ---
> >  drivers/dma/imx-sdma.c                | 38
> +++++++++++++++++++++------
> >  include/linux/platform_data/dma-imx.h |  1 +
> >  2 files changed, 31 insertions(+), 8 deletions(-)
> >
> > diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index
> > cacc725ca545..3a0e408f7741 100644
> > --- a/drivers/dma/imx-sdma.c
> > +++ b/drivers/dma/imx-sdma.c
> > @@ -907,7 +907,10 @@ static irqreturn_t sdma_int_handler(int irq, void
> *dev_id)
> >               desc = sdmac->desc;
> >               if (desc) {
> >                       if (sdmac->flags & IMX_DMA_SG_LOOP) {
> > -                             sdma_update_channel_loop(sdmac);
> > +                             if (sdmac->peripheral_type !=
> IMX_DMATYPE_HDMI)
> > +
> sdma_update_channel_loop(sdmac);
> > +                             else
> > +
> > + vchan_cyclic_callback(&desc->vd);
> >                       } else {
> >
> mxc_sdma_handle_channel_normal(sdmac);
> >                               vchan_cookie_complete(&desc->vd);
> @@
> > -1023,6 +1026,10 @@ static void sdma_get_pc(struct sdma_channel
> *sdmac,
> >       case IMX_DMATYPE_IPU_MEMORY:
> >               emi_2_per = sdma->script_addrs->ext_mem_2_ipu_addr;
> >               break;
> > +     case IMX_DMATYPE_HDMI:
> > +             emi_2_per = sdma->script_addrs->hdmi_dma_addr;
> > +             sdmac->is_ram_script = true;
> > +             break;
> >       default:
> >               break;
> >       }
> > @@ -1070,11 +1077,16 @@ static int sdma_load_context(struct
> sdma_channel *sdmac)
> >       /* Send by context the event mask,base address for peripheral
> >        * and watermark level
> >        */
> > -     context->gReg[0] = sdmac->event_mask[1];
> > -     context->gReg[1] = sdmac->event_mask[0];
> > -     context->gReg[2] = sdmac->per_addr;
> > -     context->gReg[6] = sdmac->shp_addr;
> > -     context->gReg[7] = sdmac->watermark_level;
> > +     if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> > +             context->gReg[4] = sdmac->per_addr;
> > +             context->gReg[6] = sdmac->shp_addr;
> > +     } else {
> > +             context->gReg[0] = sdmac->event_mask[1];
> > +             context->gReg[1] = sdmac->event_mask[0];
> > +             context->gReg[2] = sdmac->per_addr;
> > +             context->gReg[6] = sdmac->shp_addr;
> > +             context->gReg[7] = sdmac->watermark_level;
> > +     }
> >
> >       bd0->mode.command = C0_SETDM;
> >       bd0->mode.status = BD_DONE | BD_WRAP | BD_EXTD; @@ -1420,7
> > +1432,7 @@ static struct sdma_desc *sdma_transfer_init(struct
> sdma_channel *sdmac,
> >       desc->sdmac = sdmac;
> >       desc->num_bd = bds;
> >
> > -     if (sdma_alloc_bd(desc))
> > +     if (bds && sdma_alloc_bd(desc))
> >               goto err_desc_out;
> >
> >       /* No slave_config called in MEMCPY case, so do here */ @@
> > -1585,13 +1597,16 @@ static struct dma_async_tx_descriptor
> > *sdma_prep_dma_cyclic(  {
> >       struct sdma_channel *sdmac = to_sdma_chan(chan);
> >       struct sdma_engine *sdma = sdmac->sdma;
> > -     int num_periods = buf_len / period_len;
> > +     int num_periods = 0;
> >       int channel = sdmac->channel;
> >       int i = 0, buf = 0;
> >       struct sdma_desc *desc;
> >
> >       dev_dbg(sdma->dev, "%s channel: %d\n", __func__, channel);
> >
> > +     if (sdmac->peripheral_type != IMX_DMATYPE_HDMI)
> > +             num_periods = buf_len / period_len;
> > +
> >       sdma_config_write(chan, &sdmac->slave_config, direction);
> >
> >       desc = sdma_transfer_init(sdmac, direction, num_periods); @@
> > -1608,6 +1623,9 @@ static struct dma_async_tx_descriptor
> *sdma_prep_dma_cyclic(
> >               goto err_bd_out;
> >       }
> >
> > +     if (sdmac->peripheral_type == IMX_DMATYPE_HDMI)
> > +             return vchan_tx_prep(&sdmac->vc, &desc->vd, flags);
> > +
> >       while (buf < buf_len) {
> >               struct sdma_buffer_descriptor *bd = &desc->bd[i];
> >               int param;
> > @@ -1668,6 +1686,10 @@ static int sdma_config_write(struct dma_chan
> *chan,
> >               sdmac->watermark_level |= (dmaengine_cfg->dst_maxburst
> << 16) &
> >                       SDMA_WATERMARK_LEVEL_HWML;
> >               sdmac->word_size = dmaengine_cfg->dst_addr_width;
> > +     } else if (sdmac->peripheral_type == IMX_DMATYPE_HDMI) {
> > +             sdmac->per_address = dmaengine_cfg->dst_addr;
> > +             sdmac->per_address2 = dmaengine_cfg->src_addr;
> > +             sdmac->watermark_level = 0;
> >       } else {
> >               sdmac->per_address = dmaengine_cfg->dst_addr;
> >               sdmac->watermark_level = dmaengine_cfg->dst_maxburst *
> 
> You missed adding cyclic capability, pls add that

 The design of hdmi script achieves the cyclic capability and is different from common script.
> 
> > diff --git a/include/linux/platform_data/dma-imx.h
> > b/include/linux/platform_data/dma-imx.h
> > index 281adbb26e6b..29ac21d40f28 100644
> > --- a/include/linux/platform_data/dma-imx.h
> > +++ b/include/linux/platform_data/dma-imx.h
> > @@ -39,6 +39,7 @@ enum sdma_peripheral_type {
> >       IMX_DMATYPE_SSI_DUAL,   /* SSI Dual FIFO */
> >       IMX_DMATYPE_ASRC_SP,    /* Shared ASRC */
> >       IMX_DMATYPE_SAI,        /* SAI */
> > +     IMX_DMATYPE_HDMI,       /* HDMI Audio */
> 
> Why is this in latform_data, these should be moved to include/dt-bindings
  I will fix it in patch v2.
> 
> --
> ~Vinod