[PATCH v1 00/19] Introduce Nuvoton Arbel NPCM8XX BMC SoC

Arnd Bergmann arnd at arndb.de
Mon May 23 02:52:22 PDT 2022


On Sun, May 22, 2022 at 5:50 PM Tomer Maimon <tmaimon77 at gmail.com> wrote:
>
> This patchset  adds initial support for the Nuvoton
> Arbel NPCM8XX Board Management controller (BMC) SoC family.
>
> The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
> The NPCM8XX computing subsystem comprises a quadcore ARM
> Cortex A35 ARM-V8 architecture.
>
> This patchset adds minimal architecture and drivers such as:
> Clocksource, Clock, Reset, and WD.
>
> Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
>
> This patchset was tested on the Arbel NPCM8XX evaluation board.

Thanks for your submission. Please note a few things about the process here:

- The merge window is currently open, which means a lo

Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.

This patchset was tested on the Arbel NPCM8XX evaluation board.

Tomer Maimon (19):
  dt-bindings: timer: npcm: Add npcm845 compatible string
  clocksource: timer-npcm7xx: Add NPCM845 timer support
  dt-bindings: serial: 8250: Add npcm845 compatible string
  tty: serial: 8250: Add NPCM845 UART support
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  watchdog: npcm_wdt: Add NPCM845 watchdog support
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  clk: npcm8xx: add clock controller
  dt-bindings: reset: add syscon property
  reset: npcm: using syscon instead of device data
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: Add NPCM8XX support
  dt-bindings: arm: npcm: Add maintainer
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: defconfig: Add Nuvoton NPCM family supportt of maintainers
  won't be reviewing your patches at the moment. It may be better to wait
  for the -rc1 to be out before sending out v2

- don't send your patches to soc at kernel.org unless you want me to pick
  them up into the soc tree and they have been reviewed already. The series
  is clearly still under review at the moment, and I expect it to go through
  a few revisions first.

- gmail marked your emails as possible spam for me. I don't know what
  happened here, but you may want to look into this to ensure that
  everybody receives it.

Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.

This patchset was tested on the Arbel NPCM8XX evaluation board.

Tomer Maimon (19):
  dt-bindings: timer: npcm: Add npcm845 compatible string
  clocksource: timer-npcm7xx: Add NPCM845 timer support
  dt-bindings: serial: 8250: Add npcm845 compatible string
  tty: serial: 8250: Add NPCM845 UART support
  dt-bindings: watchdog: npcm: Add npcm845 compatible string
  watchdog: npcm_wdt: Add NPCM845 watchdog support
  dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
  clk: npcm8xx: add clock controller
  dt-bindings: reset: add syscon property
  reset: npcm: using syscon instead of device data
  dt-bindings: reset: npcm: Add support for NPCM8XX
  reset: npcm: Add NPCM8XX support
  dt-bindings: arm: npcm: Add maintainer
  dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
  dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
  arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
  arm64: dts: nuvoton: Add initial NPCM8XX device tree
  arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
  arm64: defconfig: Add Nuvoton NPCM family support

- For an initial platform submission, I can merge the
  clk/clocksource/serial/reset drivers along with the platform if they
  have an Ack from the subsystem maintainers. I would normally
  not include the watchdog patch in this as it's not essential, but
  I suppose that it's fine if you only do a oneline change and it
  has an Ack. If you have other nonessential drivers that need changes,
  best submit them separately though.

         Arnd



More information about the linux-arm-kernel mailing list