[PATCH v1 18/19] arm64: dts: nuvoton: Add initial NPCM845 EVB device tree

[Krzysztof Kozlowski]

On 22/05/2022 17:50, Tomer Maimon wrote:
> Add initial Nuvoton NPCM845 evaluation board device tree.
> 
> Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> ---
>  arch/arm64/boot/dts/nuvoton/Makefile          |  2 +
>  .../boot/dts/nuvoton/nuvoton-npcm845-evb.dts  | 50 +++++++++++++++++++
>  2 files changed, 52 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile
>  create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
> 
> diff --git a/arch/arm64/boot/dts/nuvoton/Makefile b/arch/arm64/boot/dts/nuvoton/Makefile
> new file mode 100644
> index 000000000000..a99dab90472a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nuvoton/Makefile
> @@ -0,0 +1,2 @@
> +# SPDX-License-Identifier: GPL-2.0
> +dtb-$(CONFIG_ARCH_NPCM) += nuvoton-npcm845-evb.dtb
> diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
> new file mode 100644
> index 000000000000..d7a9a85f8075
> --- /dev/null
> +++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
> @@ -0,0 +1,50 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (c) 2021 Nuvoton Technology tomer.maimon at nuvoton.com
> +
> +/dts-v1/;
> +#include "nuvoton-npcm845.dtsi"
> +
> +/ {
> +	model = "Nuvoton npcm845 Development Board (Device Tree)";

s/ (Device Tree)//

> +	compatible = "nuvoton,npcm845";

This does not match your bindings. Please test your DTS with `make
dtbs_check`.

> +
> +	aliases {
> +		serial0 = &serial0;
> +		serial1 = &serial1;
> +		serial2 = &serial2;
> +		serial3 = &serial3;
> +	};
> +
> +	chosen {
> +		stdout-path = &serial0;
> +	};
> +
> +	memory {
> +		reg = <0x0 0x0 0x0 0x40000000>;
> +	};
> +
> +	ahb {
> +

No need for blank line.

> +		apb {
> +			serial0: serial at 0 {
> +				status = "okay";

No, override by labels. Here and in places below.

> +			};
> +
> +			serial1: serial at 1000 {
> +				status = "disabled";
> +			};
> +
> +			serial2: serial at 2000 {
> +				status = "disabled";
> +			};
> +
> +			serial3: serial at 3000 {
> +				status = "disabled";
> +			};
> +
> +			watchdog1: watchdog at 901c {
> +				status = "okay";
> +			};
> +		};
> +	};
> +};


Best regards,
Krzysztof