[PATCH 2/3] ARM: dts: stm32: Add alternate pinmux for RCC pin

[Marek Vasut]

Add another mux option for RCC pin, this is used on AV96 board
for e.g. sensor clock supply.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Alexandre Torgue <alexandre.torgue at foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam at linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32 at gmail.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: linux-stm32 at st-md-mailman.stormreply.com
To: linux-arm-kernel at lists.infradead.org
---
 arch/arm/boot/dts/stm32mp15-pinctrl.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index a6b766fa9e8d5..9816331e4bb7d 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -960,6 +960,21 @@ pins {
 		};
 	};
 
+	mco1_pins_a: mco1-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	mco1_sleep_pins_a: mco1-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 13, ANALOG)>; /* MCO1 */
+		};
+	};
+
 	mco2_pins_a: mco2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 2, AF1)>; /* MCO2 */
-- 
2.35.1