[PATCH v1 08/19] clk: npcm8xx: add clock controller
Ilpo Järvinen
ilpo.jarvinen at linux.intel.com
Mon May 23 00:07:07 PDT 2022
On Sun, 22 May 2022, Tomer Maimon wrote:
> Nuvoton Arbel BMC NPCM7XX contains an integrated clock controller, which
> generates and supplies clocks to all modules within the BMC.
>
> Signed-off-by: Tomer Maimon <tmaimon77 at gmail.com>
> +static struct clk_hw *
> +npcm8xx_clk_register_pll(void __iomem *pllcon, const char *name,
> + const char *parent_name, unsigned long flags)
> +{
> + struct npcm8xx_clk_pll *pll;
> + struct clk_init_data init;
> + struct clk_hw *hw;
> + int ret;
> +
> + pll = kzalloc(sizeof(*pll), GFP_KERNEL);
> + if (!pll)
> + return ERR_PTR(-ENOMEM);
> +
> + pr_debug("%s reg, name=%s, p=%s\n", __func__, name, parent_name);
> +
> + init.name = name;
> + init.ops = &npcm8xx_clk_pll_ops;
> + init.parent_names = &parent_name;
> + init.num_parents = 1;
> + init.flags = flags;
> +
> + pll->pllcon = pllcon;
> + pll->hw.init = &init;
> +
> + hw = &pll->hw;
> +
> + ret = clk_hw_register(NULL, hw);
> + if (ret) {
> + kfree(pll);
> + hw = ERR_PTR(ret);
> + }
> +
> + return hw;
> +}
> +
> +#define NPCM8XX_CLKEN1 (0x00)
> +#define NPCM8XX_CLKEN2 (0x28)
> +#define NPCM8XX_CLKEN3 (0x30)
> +#define NPCM8XX_CLKEN4 (0x70)
> +#define NPCM8XX_CLKSEL (0x04)
> +#define NPCM8XX_CLKDIV1 (0x08)
> +#define NPCM8XX_CLKDIV2 (0x2C)
> +#define NPCM8XX_CLKDIV3 (0x58)
> +#define NPCM8XX_CLKDIV4 (0x7C)
> +#define NPCM8XX_PLLCON0 (0x0C)
> +#define NPCM8XX_PLLCON1 (0x10)
> +#define NPCM8XX_PLLCON2 (0x54)
> +#define NPCM8XX_SWRSTR (0x14)
> +#define NPCM8XX_IRQWAKECON (0x18)
> +#define NPCM8XX_IRQWAKEFLAG (0x1C)
> +#define NPCM8XX_IPSRST1 (0x20)
> +#define NPCM8XX_IPSRST2 (0x24)
> +#define NPCM8XX_IPSRST3 (0x34)
> +#define NPCM8XX_WD0RCR (0x38)
> +#define NPCM8XX_WD1RCR (0x3C)
> +#define NPCM8XX_WD2RCR (0x40)
> +#define NPCM8XX_SWRSTC1 (0x44)
> +#define NPCM8XX_SWRSTC2 (0x48)
> +#define NPCM8XX_SWRSTC3 (0x4C)
> +#define NPCM8XX_SWRSTC4 (0x50)
> +#define NPCM8XX_CORSTC (0x5C)
> +#define NPCM8XX_PLLCONG (0x60)
> +#define NPCM8XX_AHBCKFI (0x64)
> +#define NPCM8XX_SECCNT (0x68)
> +#define NPCM8XX_CNTR25M (0x6C)
> +#define NPCM8XX_THRTL_CNT (0xC0)
> +
> +struct npcm8xx_clk_gate_data {
> + u32 reg;
> + u8 bit_idx;
> + const char *name;
> + const char *parent_name;
> + unsigned long flags;
> + /*
> + * If this clock is exported via DT, set onecell_idx to constant
> + * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
> + * this specific clock. Otherwise, set to -1.
> + */
> + int onecell_idx;
> +};
> +
> +struct npcm8xx_clk_mux_data {
> + u8 shift;
> + u8 mask;
> + u32 *table;
> + const char *name;
> + const char * const *parent_names;
> + u8 num_parents;
> + unsigned long flags;
> + /*
> + * If this clock is exported via DT, set onecell_idx to constant
> + * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
> + * this specific clock. Otherwise, set to -1.
> + */
> + int onecell_idx;
> +
> +};
> +
> +struct npcm8xx_clk_div_fixed_data {
> + u8 mult;
> + u8 div;
> + const char *name;
> + const char *parent_name;
> + u8 clk_divider_flags;
> + /*
> + * If this clock is exported via DT, set onecell_idx to constant
> + * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
> + * this specific clock. Otherwise, set to -1.
> + */
> + int onecell_idx;
> +};
> +
> +struct npcm8xx_clk_div_data {
> + u32 reg;
> + u8 shift;
> + u8 width;
> + const char *name;
> + const char *parent_name;
> + u8 clk_divider_flags;
> + unsigned long flags;
> + /*
> + * If this clock is exported via DT, set onecell_idx to constant
> + * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
> + * this specific clock. Otherwise, set to -1.
> + */
> + int onecell_idx;
> +};
> +
> +struct npcm8xx_clk_pll_data {
> + u32 reg;
> + const char *name;
> + const char *parent_name;
> + unsigned long flags;
> + /*
> + * If this clock is exported via DT, set onecell_idx to constant
> + * defined in include/dt-bindings/clock/nuvoton, NPCM8XX-clock.h for
> + * this specific clock. Otherwise, set to -1.
> + */
> + int onecell_idx;
> +};
> +
> +/*
> + * Single copy of strings used to refer to clocks within this driver indexed by
> + * above enum.
> + */
> +#define NPCM8XX_CLK_S_REFCLK "refclk"
> +#define NPCM8XX_CLK_S_SYSBYPCK "sysbypck"
> +#define NPCM8XX_CLK_S_MCBYPCK "mcbypck"
> +#define NPCM8XX_CLK_S_GFXBYPCK "gfxbypck"
> +#define NPCM8XX_CLK_S_PLL0 "pll0"
> +#define NPCM8XX_CLK_S_PLL1 "pll1"
> +#define NPCM8XX_CLK_S_PLL1_DIV2 "pll1_div2"
> +#define NPCM8XX_CLK_S_PLL2 "pll2"
> +#define NPCM8XX_CLK_S_PLL_GFX "pll_gfx"
> +#define NPCM8XX_CLK_S_PLL2_DIV2 "pll2_div2"
> +#define NPCM8XX_CLK_S_PIX_MUX "gfx_pixel"
> +#define NPCM8XX_CLK_S_GPRFSEL_MUX "gprfsel_mux"
> +#define NPCM8XX_CLK_S_MC_MUX "mc_phy"
> +#define NPCM8XX_CLK_S_CPU_MUX "cpu" /*AKA system clock.*/
Add spaces around comment.
> +#define NPCM8XX_CLK_S_MC "mc"
> +#define NPCM8XX_CLK_S_AXI "axi" /*AKA CLK2*/
> +#define NPCM8XX_CLK_S_AHB "ahb" /*AKA CLK4*/
Ditto.
> +static void __init npcm8xx_clk_init(struct device_node *clk_np)
> +{
> + struct clk_hw_onecell_data *npcm8xx_clk_data;
> + void __iomem *clk_base;
> + struct resource res;
> + struct clk_hw *hw;
> + int ret;
> + int i;
> +
> + ret = of_address_to_resource(clk_np, 0, &res);
> + if (ret) {
> + pr_err("%pOFn: failed to get resource, ret %d\n", clk_np, ret);
> + return;
> + }
> +
> + clk_base = ioremap(res.start, resource_size(&res));
> + if (!clk_base)
> + goto npcm8xx_init_error;
> +
> + npcm8xx_clk_data = kzalloc(struct_size(npcm8xx_clk_data, hws,
> + NPCM8XX_NUM_CLOCKS), GFP_KERNEL);
> + if (!npcm8xx_clk_data)
> + goto npcm8xx_init_np_err;
> +
> + npcm8xx_clk_data->num = NPCM8XX_NUM_CLOCKS;
> +
> + for (i = 0; i < NPCM8XX_NUM_CLOCKS; i++)
> + npcm8xx_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);
> +
> + /* Register plls */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_plls); i++) {
> + const struct npcm8xx_clk_pll_data *pll_data = &npcm8xx_plls[i];
> +
> + hw = npcm8xx_clk_register_pll(clk_base + pll_data->reg,
> + pll_data->name,
> + pll_data->parent_name,
> + pll_data->flags);
> + if (IS_ERR(hw)) {
Who deregisters the already registered plls on error paths?
You might want to consider devm_ variants in npcm8xx_clk_register_pll() to
make the cleanup simpler.
Please check the other error path rollbacks from this point onward too.
> + pr_err("npcm8xx_clk: Can't register pll\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + if (pll_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[pll_data->onecell_idx] = hw;
> + }
> +
> + /* Register fixed dividers */
> + hw = clk_hw_register_fixed_factor(NULL, NPCM8XX_CLK_S_PLL1_DIV2,
> + NPCM8XX_CLK_S_PLL1, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register fixed div\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + hw = clk_hw_register_fixed_factor(NULL, NPCM8XX_CLK_S_PLL2_DIV2,
> + NPCM8XX_CLK_S_PLL2, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register pll div2\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + hw = clk_hw_register_fixed_factor(NULL, NPCM8XX_CLK_S_PRE_CLK,
> + NPCM8XX_CLK_S_CPU_MUX, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register ckclk div2\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + hw = clk_hw_register_fixed_factor(NULL, NPCM8XX_CLK_S_AXI,
> + NPCM8XX_CLK_S_TH, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register axi div2\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + hw = clk_hw_register_fixed_factor(NULL, NPCM8XX_CLK_S_ATB,
> + NPCM8XX_CLK_S_AXI, 0, 1, 2);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register atb div2\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + /* Register muxes */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_muxes); i++) {
> + const struct npcm8xx_clk_mux_data *mux_data = &npcm8xx_muxes[i];
> +
> + hw = clk_hw_register_mux_table(NULL, mux_data->name,
> + mux_data->parent_names,
> + mux_data->num_parents,
> + mux_data->flags,
> + clk_base + NPCM8XX_CLKSEL,
> + mux_data->shift,
> + mux_data->mask, 0,
> + mux_data->table,
> + &npcm8xx_clk_lock);
> +
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register mux\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + if (mux_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[mux_data->onecell_idx] = hw;
> + }
> +
> + /* Register clock dividers specified in npcm8xx_divs */
> + for (i = 0; i < ARRAY_SIZE(npcm8xx_divs); i++) {
> + const struct npcm8xx_clk_div_data *div_data = &npcm8xx_divs[i];
> +
> + hw = clk_hw_register_divider(NULL, div_data->name,
> + div_data->parent_name,
> + div_data->flags,
> + clk_base + div_data->reg,
> + div_data->shift, div_data->width,
> + div_data->clk_divider_flags,
> + &npcm8xx_clk_lock);
> + if (IS_ERR(hw)) {
> + pr_err("npcm8xx_clk: Can't register div table\n");
> + goto npcm8xx_init_fail;
> + }
> +
> + if (div_data->onecell_idx >= 0)
> + npcm8xx_clk_data->hws[div_data->onecell_idx] = hw;
> + }
> +
> + ret = of_clk_add_hw_provider(clk_np, of_clk_hw_onecell_get,
> + npcm8xx_clk_data);
> + if (ret)
> + pr_err("failed to add DT provider: %d\n", ret);
> +
> + of_node_put(clk_np);
> +
> + return;
> +
> +npcm8xx_init_fail:
> + kfree(npcm8xx_clk_data->hws);
> +npcm8xx_init_np_err:
> + iounmap(clk_base);
> +npcm8xx_init_error:
> + of_node_put(clk_np);
> +}
> +
> +CLK_OF_DECLARE(npcm8xx_clk_init, "nuvoton,npcm845-clk", npcm8xx_clk_init);
>
--
i.
More information about the linux-arm-kernel
mailing list