[v2 0/3] Add dtsi for sc7280 herobrine boards that using rt5682 codec

[Judy Hsiao]

Put sound node and lpass_cpu node settings for boards that use rt5682
codec in the sc7280-herobrine-audio-rt5682.dtsi as there are different
choices of headset codec for herobrine projects. Common audio setting
for the internal speaker is in sc7280-herobrine.dtsi.

This series depends on:
"Add lpass pin control support for audio on sc7280 based targets" [1]
"Add soundcard support for sc7280 based platforms" [2]

[1] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=638776
[2] https://patchwork.kernel.org/project/linux-arm-msm/list/?series=643589

Changes Since V1:
    -- Remove sound-dai-cells in sound node.
    -- Add dependency list.
    -- Update patch subject.

Judy Hsiao (3):
  arm64: dts: qcom: sc7280: herobrine: Add pinconf settings for mi2s1
  arm64: dts: qcom: sc7280: Add sc7280-herobrine-audio-rt5682.dtsi
  arm64: dts: qcom: sc7280: include sc7280-herobrine-audio-rt5682.dtsi
    in villager and herobrine-r1

 .../qcom/sc7280-herobrine-audio-rt5682.dtsi   | 120 ++++++++++++++++++
 .../qcom/sc7280-herobrine-herobrine-r1.dts    |   1 +
 .../dts/qcom/sc7280-herobrine-villager-r0.dts |   1 +
 .../arm64/boot/dts/qcom/sc7280-herobrine.dtsi |  14 ++
 4 files changed, 136 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audio-rt5682.dtsi

-- 
2.36.1.124.g0e6072fb45-goog