[PATCH v4 2/2] ARM: dts: stm32mp15x: Add timer interrupts

[Fabrice Gasnier]

On 5/19/22 18:28, Uwe Kleine-König wrote:
> The timer units in the stm32mp15x CPUs have interrupts, depending on the
> timer flavour either one "global" or four dedicated ones. Add the irqs
> to the timer units on stm32mp15x.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig at pengutronix.de>

Hi Uwe,

You can add my:
Reviewed-by: Fabrice Gasnier <fabrice.gasnier at foss.st.com>

Best Regards,
Thanks
Fabrice

> ---
>  arch/arm/boot/dts/stm32mp151.dtsi | 34 +++++++++++++++++++++++++++++++
>  1 file changed, 34 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
> index f9aa9af31efd..ae290a04771a 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -127,6 +127,8 @@ timers2: timer at 40000000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40000000 0x400>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM2_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 18 0x400 0x1>,
> @@ -160,6 +162,8 @@ timers3: timer at 40001000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40001000 0x400>;
> +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM3_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 23 0x400 0x1>,
> @@ -194,6 +198,8 @@ timers4: timer at 40002000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40002000 0x400>;
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM4_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 29 0x400 0x1>,
> @@ -226,6 +232,8 @@ timers5: timer at 40003000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40003000 0x400>;
> +			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM5_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 55 0x400 0x1>,
> @@ -260,6 +268,8 @@ timers6: timer at 40004000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40004000 0x400>;
> +			interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM6_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 69 0x400 0x1>;
> @@ -278,6 +288,8 @@ timers7: timer at 40005000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40005000 0x400>;
> +			interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM7_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 70 0x400 0x1>;
> @@ -296,6 +308,8 @@ timers12: timer at 40006000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40006000 0x400>;
> +			interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM12_K>;
>  			clock-names = "int";
>  			status = "disabled";
> @@ -318,6 +332,8 @@ timers13: timer at 40007000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40007000 0x400>;
> +			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM13_K>;
>  			clock-names = "int";
>  			status = "disabled";
> @@ -340,6 +356,8 @@ timers14: timer at 40008000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x40008000 0x400>;
> +			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM14_K>;
>  			clock-names = "int";
>  			status = "disabled";
> @@ -623,6 +641,11 @@ timers1: timer at 44000000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x44000000 0x400>;
> +			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "brk", "up", "trg-com", "cc";
>  			clocks = <&rcc TIM1_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 11 0x400 0x1>,
> @@ -659,6 +682,11 @@ timers8: timer at 44001000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x44001000 0x400>;
> +			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "brk", "up", "trg-com", "cc";
>  			clocks = <&rcc TIM8_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 47 0x400 0x1>,
> @@ -746,6 +774,8 @@ timers15: timer at 44006000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x44006000 0x400>;
> +			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM15_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 105 0x400 0x1>,
> @@ -773,6 +803,8 @@ timers16: timer at 44007000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x44007000 0x400>;
> +			interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM16_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 109 0x400 0x1>,
> @@ -797,6 +829,8 @@ timers17: timer at 44008000 {
>  			#size-cells = <0>;
>  			compatible = "st,stm32-timers";
>  			reg = <0x44008000 0x400>;
> +			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "global";
>  			clocks = <&rcc TIM17_K>;
>  			clock-names = "int";
>  			dmas = <&dmamux1 111 0x400 0x1>,