[PATCH v2 2/4] dt-bindings: reset: Add MT6735 reset bindings

[AngeloGioacchino Del Regno]

Il 19/05/22 16:22, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <y.oudjana at protonmail.com>
> 
> Add reset definitions for Mediatek MT6735 resets provided by
> infracfg and pericfg.
> 
> Signed-off-by: Yassine Oudjana <y.oudjana at protonmail.com>
> Acked-by: Rob Herring <robh at kernel.org>
> ---
>   MAINTAINERS                                   |  2 ++
>   .../reset/mediatek,mt6735-infracfg.h          | 31 +++++++++++++++++++
>   .../reset/mediatek,mt6735-pericfg.h           | 31 +++++++++++++++++++
>   3 files changed, 64 insertions(+)
>   create mode 100644 include/dt-bindings/reset/mediatek,mt6735-infracfg.h
>   create mode 100644 include/dt-bindings/reset/mediatek,mt6735-pericfg.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index a59069263cfb..1c0af554a7b6 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12503,6 +12503,8 @@ F:	include/dt-bindings/clock/mediatek,mt6735-apmixedsys.h
>   F:	include/dt-bindings/clock/mediatek,mt6735-infracfg.h
>   F:	include/dt-bindings/clock/mediatek,mt6735-pericfg.h
>   F:	include/dt-bindings/clock/mediatek,mt6735-topckgen.h
> +F:	include/dt-bindings/reset/mediatek,mt6735-infracfg.h
> +F:	include/dt-bindings/reset/mediatek,mt6735-pericfg.h
>   
>   MEDIATEK MT76 WIRELESS LAN DRIVER
>   M:	Felix Fietkau <nbd at nbd.name>

..snip..

> diff --git a/include/dt-bindings/reset/mediatek,mt6735-pericfg.h b/include/dt-bindings/reset/mediatek,mt6735-pericfg.h
> new file mode 100644
> index 000000000000..6cdfaa7ddadf
> --- /dev/null
> +++ b/include/dt-bindings/reset/mediatek,mt6735-pericfg.h
> @@ -0,0 +1,31 @@
> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
> +
> +#ifndef _DT_BINDINGS_RST_MT6735_PERICFG_H
> +#define _DT_BINDINGS_RST_MT6735_PERICFG_H
> +
> +#define UART0_SW_RST			0
> +#define UART1_SW_RST			1
> +#define UART2_SW_RST			2
> +#define UART3_SW_RST			3
> +#define UART4_SW_RST			4

where's number 5?

> +#define BTIF_SW_RST			6
> +#define DISP_PWM_SW_RST			7
> +#define PWM_SW_RST			8

...and where's 9?

> +#define AUXADC_SW_RST			10
> +#define DMA_SW_RST			11
> +#define IRDA_SW_RST			12
> +#define IRTX_SW_RST			13

and 14, 15?

> +#define THERM_SW_RST			16
> +#define MSDC2_SW_RST			17
> +#define MSDC3_SW_RST			17

MSDC 2 and 3 are both 17?! :-)

> +#define MSDC0_SW_RST			19
> +#define MSDC1_SW_RST			20

21?

> +#define I2C0_SW_RST			22
> +#define I2C1_SW_RST			23
> +#define I2C2_SW_RST			24
> +#define I2C3_SW_RST			25
> +#define USB_SW_RST			28
> +

and 29-32?

> +#define SPI0_SW_RST			33
> +
> +#endif

I have a hunch that you've misunderstood the changes in the resets...

What Rex-BC has done in his reset cleanup is exactly to stop directly
mapping these to the actual bits that we're using... so the definitions
in there will simply be sequential, and the actual mapping is done in
your clk-mt6735-pericfg.c driver.

Is it clear? Does it make sense now? :-)

Cheers,
Angelo