[PATCH v10 1/3] dt-bindings: mmc: mtk-sd: extend interrupts and pinctrls properties

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Thu May 19 04:18:35 PDT 2022


Il 19/05/22 13:13, Axe Yang ha scritto:
> Extend interrupts and pinctrls for SDIO wakeup interrupt feature.
> This feature allow SDIO devices alarm asynchronous interrupt to host
> even when host stop providing clock to SDIO card. An extra wakeup
> interrupt and pinctrl states for SDIO DAT1 pin state switching are
> required in this scenario.
> 
> Signed-off-by: Axe Yang <axe.yang at mediatek.com>
> ---
>   .../devicetree/bindings/mmc/mtk-sd.yaml       | 53 ++++++++++++++++++-
>   1 file changed, 52 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> index 2a2e9fa8c188..b068ab67a054 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -72,12 +72,26 @@ properties:
>         - const: ahb_cg
>   
>     interrupts:
> -    maxItems: 1
> +    description:
> +      Should at least contain MSDC GIC interrupt. To support SDIO in-band wakeup, an extended
> +      interrupt is required and be configured as wakeup source irq.
> +    minItems: 1
> +    maxItems: 2
> +
> +  interrupt-names:
> +    items:
> +      - const: msdc_irq
>   

That ain't right. You have two interrupts, so you describe two interrupts:

interrupt-names:
   minItems: 1
   items:
     - const: msdc
     - const: sdio-wakeup

...also, I personally don't like the "_irq" suffix: we're specifying interrupts in
interrupt-names, so it sounds a bit redundant.

You're free to keep it, if you really like it though.

Regards,
Angelo



More information about the linux-arm-kernel mailing list