[PATCH v2 1/2] perf: coresight_pmu: Add support for ARM CoreSight PMU driver
Suzuki K Poulose
suzuki.poulose at arm.com
Thu May 19 01:52:01 PDT 2022
On 15/05/2022 17:30, Besar Wicaksono wrote:
> Add support for ARM CoreSight PMU driver framework and interfaces.
> The driver provides generic implementation to operate uncore PMU based
> on ARM CoreSight PMU architecture. The driver also provides interface
> to get vendor/implementation specific information, for example event
> attributes and formating.
>
> The specification used in this implementation can be found below:
> * ACPI Arm Performance Monitoring Unit table:
> https://developer.arm.com/documentation/den0117/latest
> * ARM Coresight PMU architecture:
> https://developer.arm.com/documentation/ihi0091/latest
>
> Signed-off-by: Besar Wicaksono <bwicaksono at nvidia.com>
> ---
> arch/arm64/configs/defconfig | 1 +
> drivers/perf/Kconfig | 2 +
> drivers/perf/Makefile | 1 +
> drivers/perf/coresight_pmu/Kconfig | 11 +
> drivers/perf/coresight_pmu/Makefile | 6 +
> .../perf/coresight_pmu/arm_coresight_pmu.c | 1267 +++++++++++++++++
> .../perf/coresight_pmu/arm_coresight_pmu.h | 171 +++
> 7 files changed, 1459 insertions(+)
> create mode 100644 drivers/perf/coresight_pmu/Kconfig
> create mode 100644 drivers/perf/coresight_pmu/Makefile
> create mode 100644 drivers/perf/coresight_pmu/arm_coresight_pmu.c
> create mode 100644 drivers/perf/coresight_pmu/arm_coresight_pmu.h
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 2ca8b1b336d2..8f2120182b25 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -1196,6 +1196,7 @@ CONFIG_PHY_UNIPHIER_USB3=y
> CONFIG_PHY_TEGRA_XUSB=y
> CONFIG_PHY_AM654_SERDES=m
> CONFIG_PHY_J721E_WIZ=m
> +CONFIG_ARM_CORESIGHT_PMU=y
> CONFIG_ARM_SMMU_V3_PMU=m
> CONFIG_FSL_IMX8_DDR_PMU=m
> CONFIG_QCOM_L2_PMU=y
> diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
> index 1e2d69453771..c4e7cd5b4162 100644
> --- a/drivers/perf/Kconfig
> +++ b/drivers/perf/Kconfig
> @@ -192,4 +192,6 @@ config MARVELL_CN10K_DDR_PMU
> Enable perf support for Marvell DDR Performance monitoring
> event on CN10K platform.
>
> +source "drivers/perf/coresight_pmu/Kconfig"
> +
> endmenu
> diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
> index 57a279c61df5..4126a04b5583 100644
> --- a/drivers/perf/Makefile
> +++ b/drivers/perf/Makefile
> @@ -20,3 +20,4 @@ obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
> obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
> obj-$(CONFIG_APPLE_M1_CPU_PMU) += apple_m1_cpu_pmu.o
> +obj-$(CONFIG_ARM_CORESIGHT_PMU) += coresight_pmu/
> diff --git a/drivers/perf/coresight_pmu/Kconfig b/drivers/perf/coresight_pmu/Kconfig
> new file mode 100644
> index 000000000000..89174f54c7be
> --- /dev/null
> +++ b/drivers/perf/coresight_pmu/Kconfig
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0
> +#
> +# Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES.
> +
> +config ARM_CORESIGHT_PMU
> + tristate "ARM Coresight PMU"
> + depends on ACPI
> + depends on ACPI_APMT || COMPILE_TEST
> + help
> + Provides support for Performance Monitoring Unit (PMU) events based on
> + ARM CoreSight PMU architecture.
> \ No newline at end of file
> diff --git a/drivers/perf/coresight_pmu/Makefile b/drivers/perf/coresight_pmu/Makefile
> new file mode 100644
> index 000000000000..a2a7a5fbbc16
> --- /dev/null
> +++ b/drivers/perf/coresight_pmu/Makefile
> @@ -0,0 +1,6 @@
> +# Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES.
> +#
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_ARM_CORESIGHT_PMU) += \
> + arm_coresight_pmu.o
> diff --git a/drivers/perf/coresight_pmu/arm_coresight_pmu.c b/drivers/perf/coresight_pmu/arm_coresight_pmu.c
> new file mode 100644
> index 000000000000..36ac77ab85cd
> --- /dev/null
> +++ b/drivers/perf/coresight_pmu/arm_coresight_pmu.c
> @@ -0,0 +1,1267 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ARM CoreSight PMU driver.
> + *
> + * This driver adds support for uncore PMU based on ARM CoreSight Performance
> + * Monitoring Unit Architecture. The PMU is accessible via MMIO registers and
> + * like other uncore PMUs, it does not support process specific events and
> + * cannot be used in sampling mode.
> + *
> + * This code is based on other uncore PMUs like ARM DSU PMU. It provides a
> + * generic implementation to operate the PMU according to CoreSight PMU
> + * architecture and ACPI ARM PMU table (APMT) documents below:
> + * - ARM CoreSight PMU architecture document number: ARM IHI 0091 A.a-00bet0.
> + * - APMT document number: ARM DEN0117.
> + * The description of the PMU, like the PMU device identification, available
> + * events, and configuration options, is vendor specific. The driver provides
> + * interface for vendor specific code to get this information. This allows the
> + * driver to be shared with PMU from different vendors.
> + *
> + * CoreSight PMU devices are named as arm_coresight_pmu<node_id> where <node_id>
> + * is APMT node id. The description of the device, like the identifier,
Please see my comment below, near coresight_pmu_alloc().
> + * supported events, and formats can be found in sysfs
> + * /sys/bus/event_source/devices/arm_coresight_pmu<node_id>
> + *
> + * The user should refer to the vendor technical documentation to get details
> + * about the supported events.
> + *
> + * Copyright (c) 2022, NVIDIA CORPORATION & AFFILIATES.
> + *
> + */
...
> +static int coresight_pmu_alloc(struct platform_device *pdev,
> + struct coresight_pmu **coresight_pmu)
> +{
> + struct acpi_apmt_node *apmt_node;
> + struct device *dev;
> + struct coresight_pmu *pmu;
> +
> + dev = &pdev->dev;
> + apmt_node = *(struct acpi_apmt_node **)dev_get_platdata(dev);
> + if (!apmt_node) {
> + dev_err(dev, "failed to get APMT node\n");
> + return -ENOMEM;
> + }
> +
> + pmu = devm_kzalloc(dev, sizeof(*pmu), GFP_KERNEL);
> + if (!pmu)
> + return -ENOMEM;
> +
> + *coresight_pmu = pmu;
> +
> + pmu->dev = dev;
> + pmu->apmt_node = apmt_node;
> + pmu->name =
> + devm_kasprintf(dev, GFP_KERNEL, PMUNAME "%u", apmt_node->id);
Could we not name this "<vendor>_<ipname>_pmu" ? Or even let the
"implementor" name it ? After all, for a *normal user*, all it matters
is how to find a PMU device for my xyz IP.
The coresight_pmu architecture is there to make the life easier for the
software driver and the hardware implementation. We don't need to
necessarily pass on this abstraction to an end-user and learn how to
figure out which "arm_*_pmu<N>" is my PCIe, or SMMU or xyz instance.
Suzuki
More information about the linux-arm-kernel
mailing list