[PATCH net-next 11/12] net: mtk_eth_soc: convert code structure to suit split PCS support
Russell King (Oracle)
rmk+kernel at armlinux.org.uk
Wed May 18 07:55:22 PDT 2022
Provide a mtk_pcs structure which encapsulates everything that the PCS
functions need (the regmap and ana_rgc3 offset), and use this in the
PCS functions. Provide shim functions to convert from the existing
"mtk_sgmii_*" interface to the converted PCS functions.
Signed-off-by: Russell King (Oracle) <rmk+kernel at armlinux.org.uk>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 15 ++-
drivers/net/ethernet/mediatek/mtk_sgmii.c | 123 +++++++++++---------
2 files changed, 79 insertions(+), 59 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 1ad5c26f01fb..8bf2d53cbec8 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -869,16 +869,23 @@ struct mtk_soc_data {
/* currently no SoC has more than 2 macs */
#define MTK_MAX_DEVS 2
-/* struct mtk_sgmii - This is the structure holding sgmii regmap and its
- * characteristics
+/* struct mtk_pcs - This structure holds each sgmii regmap and associated
+ * data
* @regmap: The register map pointing at the range used to setup
* SGMII modes
* @ana_rgc3: The offset refers to register ANA_RGC3 related to regmap
*/
+struct mtk_pcs {
+ struct regmap *regmap;
+ u32 ana_rgc3;
+};
+/* struct mtk_sgmii - This is the structure holding sgmii regmap and its
+ * characteristics
+ * @pcs Array of individual PCS structures
+ */
struct mtk_sgmii {
- struct regmap *regmap[MTK_MAX_DEVS];
- u32 ana_rgc3;
+ struct mtk_pcs pcs[MTK_MAX_DEVS];
};
/* struct mtk_eth - This is the main datasructure for holding the state
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index 4defc1ca41b6..7f257f492926 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -9,90 +9,71 @@
#include <linux/mfd/syscon.h>
#include <linux/of.h>
+#include <linux/phylink.h>
#include <linux/regmap.h>
#include "mtk_eth_soc.h"
-int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
-{
- struct device_node *np;
- int i;
-
- ss->ana_rgc3 = ana_rgc3;
-
- for (i = 0; i < MTK_MAX_DEVS; i++) {
- np = of_parse_phandle(r, "mediatek,sgmiisys", i);
- if (!np)
- break;
-
- ss->regmap[i] = syscon_node_to_regmap(np);
- of_node_put(np);
- if (IS_ERR(ss->regmap[i]))
- return PTR_ERR(ss->regmap[i]);
- }
-
- return 0;
-}
-
/* For SGMII interface mode */
-static int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id)
+static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs)
{
unsigned int val;
- if (!ss->regmap[id])
+ if (!mpcs->regmap)
return -EINVAL;
/* Setup the link timer and QPHY power up inside SGMIISYS */
- regmap_write(ss->regmap[id], SGMSYS_PCS_LINK_TIMER,
+ regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER,
SGMII_LINK_TIMER_DEFAULT);
- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
val |= SGMII_REMOTE_FAULT_DIS;
- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
- regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
+ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
val |= SGMII_AN_RESTART;
- regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
val &= ~SGMII_PHYA_PWD;
- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
return 0;
+
}
/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a
* fixed speed.
*/
-static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
- phy_interface_t interface)
+static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs,
+ phy_interface_t interface)
{
unsigned int val;
- if (!ss->regmap[id])
+ if (!mpcs->regmap)
return -EINVAL;
- regmap_read(ss->regmap[id], ss->ana_rgc3, &val);
+ regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val);
val &= ~RG_PHY_SPEED_MASK;
if (interface == PHY_INTERFACE_MODE_2500BASEX)
val |= RG_PHY_SPEED_3_125G;
- regmap_write(ss->regmap[id], ss->ana_rgc3, val);
+ regmap_write(mpcs->regmap, mpcs->ana_rgc3, val);
/* Disable SGMII AN */
- regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val);
+ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
val &= ~SGMII_AN_ENABLE;
- regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
+ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
/* Set the speed etc but leave the duplex unchanged */
- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
val |= SGMII_SPEED_1000;
- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
/* Release PHYA power down state */
- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val);
+ regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val);
val &= ~SGMII_PHYA_PWD;
- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val);
+ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val);
return 0;
}
@@ -100,44 +81,76 @@ static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode,
phy_interface_t interface)
{
+ struct mtk_pcs *mpcs = &ss->pcs[id];
int err = 0;
/* Setup SGMIISYS with the determined property */
if (interface != PHY_INTERFACE_MODE_SGMII)
- err = mtk_sgmii_setup_mode_force(ss, id, interface);
+ err = mtk_pcs_setup_mode_force(mpcs, interface);
else if (phylink_autoneg_inband(mode))
- err = mtk_sgmii_setup_mode_an(ss, id);
+ err = mtk_pcs_setup_mode_an(mpcs);
return err;
}
-/* For 1000BASE-X and 2500BASE-X interface modes */
-void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+static void mtk_pcs_restart_an(struct mtk_pcs *mpcs)
+{
+ unsigned int val;
+
+ if (!mpcs->regmap)
+ return;
+
+ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val);
+ val |= SGMII_AN_RESTART;
+ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val);
+}
+
+static void mtk_pcs_link_up(struct mtk_pcs *mpcs, int speed, int duplex)
{
unsigned int val;
/* SGMII force duplex setting */
- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val);
val &= ~SGMII_DUPLEX_FULL;
if (duplex == DUPLEX_FULL)
val |= SGMII_DUPLEX_FULL;
- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val);
+}
+
+/* For 1000BASE-X and 2500BASE-X interface modes */
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+{
+ mtk_pcs_link_up(&ss->pcs[id], speed, duplex);
+}
+
+int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3)
+{
+ struct device_node *np;
+ int i;
+
+ for (i = 0; i < MTK_MAX_DEVS; i++) {
+ np = of_parse_phandle(r, "mediatek,sgmiisys", i);
+ if (!np)
+ break;
+
+ ss->pcs[i].ana_rgc3 = ana_rgc3;
+ ss->pcs[i].regmap = syscon_node_to_regmap(np);
+ of_node_put(np);
+ if (IS_ERR(ss->pcs[i].regmap))
+ return PTR_ERR(ss->pcs[i].regmap);
+ }
+
+ return 0;
}
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
{
- struct mtk_sgmii *ss = eth->sgmii;
- unsigned int val, sid;
+ unsigned int sid;
/* Decide how GMAC and SGMIISYS be mapped */
sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
0 : mac_id;
- if (!ss->regmap[sid])
- return;
-
- regmap_read(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, &val);
- val |= SGMII_AN_RESTART;
- regmap_write(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, val);
+ mtk_pcs_restart_an(ð->sgmii->pcs[sid]);
}
--
2.30.2
More information about the linux-arm-kernel
mailing list