[PATCH net-next 05/12] net: mtk_eth_soc: correct 802.3z duplex setting
Russell King
rmk+kernel at armlinux.org.uk
Wed May 18 07:54:52 PDT 2022
Phylink does not guarantee that state->duplex will be set correctly in
the mac_config() call, so it's a bug that the driver makes use of it.
Move the 802.3z PCS duplex configuration to mac_link_up().
Signed-off-by: Russell King <rmk+kernel at armlinux.org.uk>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 +++++++++++----
drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 +
drivers/net/ethernet/mediatek/mtk_sgmii.c | 22 +++++++++++++++------
3 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index b45469ad5ce7..6c3d5f165e3d 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -485,8 +485,18 @@ static void mtk_mac_link_up(struct phylink_config *config,
{
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
- u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
+ u32 mcr;
+
+ if (phy_interface_mode_is_8023z(interface)) {
+ struct mtk_eth *eth = mac->hw;
+
+ /* Decide how GMAC and SGMIISYS be mapped */
+ int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ?
+ 0 : mac->id;
+ mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex);
+ }
+ mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id));
mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 |
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC |
MAC_MCR_FORCE_RX_FC);
@@ -2986,9 +2996,7 @@ static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np)
mac->phylink_config.dev = ð->netdev[id]->dev;
mac->phylink_config.type = PHYLINK_NETDEV;
- /* This driver makes use of state->speed/state->duplex in
- * mac_config
- */
+ /* This driver makes use of state->speed in mac_config */
mac->phylink_config.legacy_pre_march2020 = true;
mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD;
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 4f97195159f3..7540dcb06a72 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -1017,6 +1017,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np,
int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id);
int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
const struct phylink_link_state *state);
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex);
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id);
int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id);
diff --git a/drivers/net/ethernet/mediatek/mtk_sgmii.c b/drivers/net/ethernet/mediatek/mtk_sgmii.c
index d378ecdf56cc..f07a9d50a770 100644
--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c
+++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c
@@ -83,14 +83,10 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
val &= ~SGMII_AN_ENABLE;
regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val);
- /* SGMII force mode setting */
+ /* Set the speed etc but leave the duplex unchanged */
regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
- val &= ~SGMII_IF_MODE_MASK;
+ val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK;
val |= SGMII_SPEED_1000;
-
- if (state->duplex == DUPLEX_FULL)
- val |= SGMII_DUPLEX_FULL;
-
regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
/* Release PHYA power down state */
@@ -101,6 +97,20 @@ int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id,
return 0;
}
+/* For 1000BASE-X and 2500BASE-X interface modes */
+void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex)
+{
+ unsigned int val;
+
+ /* SGMII force duplex setting */
+ regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val);
+ val &= ~SGMII_DUPLEX_FULL;
+ if (duplex == DUPLEX_FULL)
+ val |= SGMII_DUPLEX_FULL;
+
+ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val);
+}
+
void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id)
{
struct mtk_sgmii *ss = eth->sgmii;
--
2.30.2
More information about the linux-arm-kernel
mailing list